Reference record for OID 1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.2.1

hpnicfmplsLsrModuleCompliance

Status in source: current.

Names: hpnicfmplsLsrModuleCompliance

{
  "smi_kind": "MODULE-COMPLIANCE",
  "definition": [
    "hpnicfmplsLsrModuleCompliance",
    "MODULE-COMPLIANCE",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"Compliance statement for agents that support the MPLS LSR MIB.\"",
    "MODULE",
    "MANDATORY-GROUPS",
    "{",
    "hpnicfmplsInSegmentGroup",
    ",",
    "hpnicfmplsOutSegmentGroup",
    ",",
    "hpnicfmplsXCGroup",
    ",",
    "hpnicfmplsInterfaceGroup",
    ",",
    "hpnicfmplsPerfGroup",
    ",",
    "hpnicfmplsSegmentDiscontinuityGroup",
    "}",
    "GROUP",
    "hpnicfmplsHCInSegmentPerfGroup",
    "DESCRIPTION",
    "\"This group is mandatory for those in-segment entries for which the object hpnicfmplsInSegmentOutOctets wraps around too quickly.\"",
    "GROUP",
    "hpnicfmplsHCOutSegmentPerfGroup",
    "DESCRIPTION",
    "\"This group is mandatory for those out-segment entries for which the object hpnicfmplsOutSegmentOctets wraps around too quickly.\"",
    "GROUP",
    "hpnicfmplsTrafficParamGroup",
    "DESCRIPTION",
    "\"This group is mandatory for those LSRs that support QoS resource reservation.\"",
    "GROUP",
    "hpnicfmplsXCIsPersistentGroup",
    "DESCRIPTION",
    "\"This group is mandatory for devices which support persistent cross-connects. The following constraints apply: hpnicfmplsXCIsPersistent must at least be read-only returning true(2).\"",
    "GROUP",
    "hpnicfmplsXCIsNotPersistentGroup",
    "DESCRIPTION",
    "\"This group is mandatory for devices which support non-persistent cross-connects. The following constraints apply: hpnicfmplsXCIsPersistent must at least be read-only returning false(1).\"",
    "OBJECT",
    "hpnicfmplsInterfaceConfStorageType",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    "}",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Only other(1) needs to be supported.\"",
    "OBJECT",
    "hpnicfmplsInSegmentXCIndex",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "hpnicfmplsInSegmentNPop",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access if not required. This object should be set to 1 if it is read-only.\"",
    "OBJECT",
    "hpnicfmplsInSegmentAddrFamily",
    "DESCRIPTION",
    "\"Write access is not required. A <value of other(0) should be supported because there may be cases where the agent may not know about or support any address types.\"",
    "OBJECT",
    "hpnicfmplsInSegmentStorageType",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    "}",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Only other(1) needs to be supported.\"",
    "OBJECT",
    "hpnicfmplsOutSegmentIfIndex",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "hpnicfmplsOutSegmentPushTopLabel",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "hpnicfmplsOutSegmentTopLabel",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "hpnicfmplsOutSegmentNextHopIpAddrType",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"ipV6(3) need not be supported.\"",
    "OBJECT",
    "hpnicfmplsOutSegmentNextHopIpv4Addr",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "hpnicfmplsOutSegmentNextHopIpv6Addr",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "hpnicfmplsOutSegmentRowStatus",
    "SYNTAX",
    "INTEGER",
    "{",
    "active",
    "(",
    "1",
    ")",
    ",",
    "notInService",
    "(",
    "2",
    ")",
    ",",
    "createAndGo",
    "(",
    "4",
    ")",
    ",",
    "destroy",
    "(",
    "6",
    ")",
    "}",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"The notReady(3) and createAndWait(5) states need not be supported.\"",
    "OBJECT",
    "hpnicfmplsOutSegmentStorageType",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    "}",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Only other(1) needs to be supported.\"",
    "OBJECT",
    "hpnicfmplsXCLabelStackIndex",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "hpnicfmplsXCIsPersistent",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "hpnicfmplsXCAdminStatus",
    "SYNTAX",
    "INTEGER",
    "{",
    "up",
    "(",
    "1",
    ")",
    ",",
    "down",
    "(",
    "2",
    ")",
    "}",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"A value of testing(3) need not be supported.\"",
    "OBJECT",
    "hpnicfmplsXCOperStatus",
    "SYNTAX",
    "INTEGER",
    "{",
    "up",
    "(",
    "1",
    ")",
    ",",
    "down",
    "(",
    "2",
    ")",
    "}",
    "DESCRIPTION",
    "\"Only up(1) and down(2) need to be supported.\"",
    "OBJECT",
    "hpnicfmplsXCRowStatus",
    "SYNTAX",
    "INTEGER",
    "{",
    "active",
    "(",
    "1",
    ")",
    ",",
    "notInService",
    "(",
    "2",
    ")",
    ",",
    "createAndGo",
    "(",
    "4",
    ")",
    ",",
    "destroy",
    "(",
    "6",
    ")",
    "}",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"The notReady(3) and createAndWait(5) states need not be supported.\"",
    "OBJECT",
    "hpnicfmplsXCStorageType",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    "}",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Only other(1) needs to be supported.\"",
    "::=",
    "{",
    "hpnicfmplsLsrCompliances",
    "1",
    "}"
  ],
  "syntax_tree": [
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Compliance statement for agents that support the MPLS LSR MIB."
    ],
    null,
    [
      "ComplianceModules",
      [
        [
          null,
          [
            "hpnicfmplsInSegmentGroup",
            "hpnicfmplsOutSegmentGroup",
            "hpnicfmplsXCGroup",
            "hpnicfmplsInterfaceGroup",
            "hpnicfmplsPerfGroup",
            "hpnicfmplsSegmentDiscontinuityGroup",
            "hpnicfmplsHCInSegmentPerfGroup",
            "hpnicfmplsHCOutSegmentPerfGroup",
            "hpnicfmplsTrafficParamGroup",
            "hpnicfmplsXCIsPersistentGroup",
            "hpnicfmplsXCIsNotPersistentGroup"
          ]
        ]
      ]
    ]
  ]
}

• HPE networking MIB copies (LibreNMS/Observium Community) · Publisher's source file: Source package: observium-community-latest.tar.gz

  Vendor MIB copy from the Observium Community archive. HPE networking support.

  Module: HPN-ICF-MPLS-LSR-MIB

  Published definition

  hpnicfmplsLsrModuleCompliance MODULE-COMPLIANCE
     STATUS current
     DESCRIPTION
         "Compliance statement for agents that support the
          MPLS LSR MIB."
     MODULE -- this module
  
        -- The mandatory groups have to be implemented
        -- by all LSRs.  However, they may all be supported
        -- as read-only objects in the case where manual
        -- configuration is unsupported.
  
        MANDATORY-GROUPS    { hpnicfmplsInSegmentGroup,
                              hpnicfmplsOutSegmentGroup,
                              hpnicfmplsXCGroup,
                              hpnicfmplsInterfaceGroup,
                              hpnicfmplsPerfGroup,
                              hpnicfmplsSegmentDiscontinuityGroup }
  
        GROUP hpnicfmplsHCInSegmentPerfGroup
        DESCRIPTION
            "This group is mandatory for those in-segment
             entries for which the object
             hpnicfmplsInSegmentOutOctets wraps around too
             quickly."
  
        GROUP hpnicfmplsHCOutSegmentPerfGroup
        DESCRIPTION
            "This group is mandatory for those out-segment
             entries for which the object
             hpnicfmplsOutSegmentOctets wraps around too quickly."
            
        GROUP hpnicfmplsTrafficParamGroup
        DESCRIPTION
            "This group is mandatory for those LSRs that
             support QoS resource reservation."
  
        -- Depending on whether the device implements
        -- persistent cross-connects or not one of the
        -- following two groups is mandatory.
  
        GROUP hpnicfmplsXCIsPersistentGroup
        DESCRIPTION
            "This group is mandatory for devices which
             support persistent cross-connects.  The
             following constraints apply: hpnicfmplsXCIsPersistent
             must at least be read-only returning true(2)."
  
        GROUP hpnicfmplsXCIsNotPersistentGroup
        DESCRIPTION
            "This group is mandatory for devices which
             support non-persistent cross-connects.  The
             following constraints apply: hpnicfmplsXCIsPersistent
             must at least be read-only returning false(1)."
  
        -- hpnicfmplsInterfaceConfTable
  
        OBJECT      hpnicfmplsInterfaceConfStorageType
        SYNTAX      INTEGER { other(1) }
        MIN-ACCESS  read-only
        DESCRIPTION
            "Only other(1) needs to be supported."
        
        -- hpnicfmplsInSegmentTable
            
        OBJECT     hpnicfmplsInSegmentXCIndex
        DESCRIPTION
            "Write access is not required."
  
        OBJECT      hpnicfmplsInSegmentNPop
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access if not required.  This object
             should be set to 1 if it is read-only."
  
        OBJECT      hpnicfmplsInSegmentAddrFamily
        DESCRIPTION
            "Write access is not required.  A <value of
             other(0) should be supported because there may
             be cases where the agent may not know about or
             support any address types."
  
        OBJECT      hpnicfmplsInSegmentStorageType
        SYNTAX      INTEGER { other(1) }
        MIN-ACCESS  read-only
  
        DESCRIPTION
            "Only other(1) needs to be supported."
  
        -- hpnicfmplsOutSegmentTable
  
        OBJECT      hpnicfmplsOutSegmentIfIndex
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is not required."
        
        OBJECT      hpnicfmplsOutSegmentPushTopLabel
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is not required."
  
        OBJECT      hpnicfmplsOutSegmentTopLabel
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is not required."
  
        OBJECT      hpnicfmplsOutSegmentNextHopIpAddrType
        MIN-ACCESS  read-only
        DESCRIPTION
            "ipV6(3) need not be supported."
  
        OBJECT      hpnicfmplsOutSegmentNextHopIpv4Addr
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is not required."
  
        OBJECT      hpnicfmplsOutSegmentNextHopIpv6Addr
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is not required."
  
        OBJECT      hpnicfmplsOutSegmentRowStatus
        SYNTAX      INTEGER { active(1), notInService(2),
                              createAndGo(4), destroy(6) }
        MIN-ACCESS  read-only
        DESCRIPTION
            "The notReady(3) and createAndWait(5) states need
             not be supported."
        OBJECT      hpnicfmplsOutSegmentStorageType
        SYNTAX      INTEGER { other(1) }
        MIN-ACCESS  read-only
        DESCRIPTION
            "Only other(1) needs to be supported."
  
        -- hpnicfmplsXCTable
  
        OBJECT      hpnicfmplsXCLabelStackIndex
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is not required."
  
        OBJECT      hpnicfmplsXCIsPersistent
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is not required."
  
        OBJECT      hpnicfmplsXCAdminStatus
        SYNTAX      INTEGER { up(1), down(2) }
        MIN-ACCESS  read-only
        DESCRIPTION
            "A value of testing(3) need not be supported."
  
        OBJECT      hpnicfmplsXCOperStatus
        SYNTAX      INTEGER { up(1), down(2) }
        DESCRIPTION
            "Only up(1) and down(2) need to be supported."
        
        OBJECT      hpnicfmplsXCRowStatus
        SYNTAX      INTEGER { active(1),
                               notInService(2),
                               createAndGo(4),
                               destroy(6) }
        MIN-ACCESS  read-only
        DESCRIPTION
            "The notReady(3) and createAndWait(5) states need
             not be supported."
        
        OBJECT      hpnicfmplsXCStorageType
        SYNTAX      INTEGER { other(1) }
        MIN-ACCESS  read-only
        DESCRIPTION
            "Only other(1) needs to be supported."
  
     ::= { hpnicfmplsLsrCompliances 1 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'StorageType', 'RowPointer', 'TimeStamp'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Counter32', 'Unsigned32', 'Counter64', 'Gauge32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'HPN-ICF-OID-MIB': ['hpnicfMpls'], 'INET-ADDRESS-MIB': ['InetAddressIPv4', 'InetAddressIPv6', 'InetAddressType'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}

  Related source files and packages:

  • Observium Community original distribution archivePublisher Last-Modified: Tue, 05 May 2026 13:47:48 GMT; 127.4 MiB
  
  Source location: HPN-ICF-MPLS-LSR-MIB::hpnicfmplsLsrModuleCompliance.
  Source version and references

  Downloaded: 2026-10-23T19:25:40.978284+00:00.

• Netdisco MIB archive copies · Publisher's source file: hpnicfMplsLsr.mib

  Vendor MIB copy from the Netdisco archive.

  Module: HPN-ICF-MPLS-LSR-MIB

  Published definition

  hpnicfmplsLsrModuleCompliance MODULE-COMPLIANCE
     STATUS current
     DESCRIPTION
         "Compliance statement for agents that support the
          MPLS LSR MIB."
     MODULE -- this module
  
        -- The mandatory groups have to be implemented
        -- by all LSRs.  However, they may all be supported
        -- as read-only objects in the case where manual
        -- configuration is unsupported.
  
        MANDATORY-GROUPS    { hpnicfmplsInSegmentGroup,
                              hpnicfmplsOutSegmentGroup,
                              hpnicfmplsXCGroup,
                              hpnicfmplsInterfaceGroup,
                              hpnicfmplsPerfGroup,
                              hpnicfmplsSegmentDiscontinuityGroup }
  
        GROUP hpnicfmplsHCInSegmentPerfGroup
        DESCRIPTION
            "This group is mandatory for those in-segment
             entries for which the object
             hpnicfmplsInSegmentOutOctets wraps around too
             quickly."
  
        GROUP hpnicfmplsHCOutSegmentPerfGroup
        DESCRIPTION
            "This group is mandatory for those out-segment
             entries for which the object
             hpnicfmplsOutSegmentOctets wraps around too quickly."
            
        GROUP hpnicfmplsTrafficParamGroup
        DESCRIPTION
            "This group is mandatory for those LSRs that
             support QoS resource reservation."
  
        -- Depending on whether the device implements
        -- persistent cross-connects or not one of the
        -- following two groups is mandatory.
  
        GROUP hpnicfmplsXCIsPersistentGroup
        DESCRIPTION
            "This group is mandatory for devices which
             support persistent cross-connects.  The
             following constraints apply: hpnicfmplsXCIsPersistent
             must at least be read-only returning true(2)."
  
        GROUP hpnicfmplsXCIsNotPersistentGroup
        DESCRIPTION
            "This group is mandatory for devices which
             support non-persistent cross-connects.  The
             following constraints apply: hpnicfmplsXCIsPersistent
             must at least be read-only returning false(1)."
  
        -- hpnicfmplsInterfaceConfTable
  
        OBJECT      hpnicfmplsInterfaceConfStorageType
        SYNTAX      INTEGER { other(1) }
        MIN-ACCESS  read-only
        DESCRIPTION
            "Only other(1) needs to be supported."
        
        -- hpnicfmplsInSegmentTable
            
        OBJECT     hpnicfmplsInSegmentXCIndex
        DESCRIPTION
            "Write access is not required."
  
        OBJECT      hpnicfmplsInSegmentNPop
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access if not required.  This object
             should be set to 1 if it is read-only."
  
        OBJECT      hpnicfmplsInSegmentAddrFamily
        DESCRIPTION
            "Write access is not required.  A <value of
             other(0) should be supported because there may
             be cases where the agent may not know about or
             support any address types."
  
        OBJECT      hpnicfmplsInSegmentStorageType
        SYNTAX      INTEGER { other(1) }
        MIN-ACCESS  read-only
  
        DESCRIPTION
            "Only other(1) needs to be supported."
  
        -- hpnicfmplsOutSegmentTable
  
        OBJECT      hpnicfmplsOutSegmentIfIndex
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is not required."
        
        OBJECT      hpnicfmplsOutSegmentPushTopLabel
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is not required."
  
        OBJECT      hpnicfmplsOutSegmentTopLabel
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is not required."
  
        OBJECT      hpnicfmplsOutSegmentNextHopIpAddrType
        MIN-ACCESS  read-only
        DESCRIPTION
            "ipV6(3) need not be supported."
  
        OBJECT      hpnicfmplsOutSegmentNextHopIpv4Addr
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is not required."
  
        OBJECT      hpnicfmplsOutSegmentNextHopIpv6Addr
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is not required."
  
        OBJECT      hpnicfmplsOutSegmentRowStatus
        SYNTAX      INTEGER { active(1), notInService(2),
                              createAndGo(4), destroy(6) }
        MIN-ACCESS  read-only
        DESCRIPTION
            "The notReady(3) and createAndWait(5) states need
             not be supported."
        OBJECT      hpnicfmplsOutSegmentStorageType
        SYNTAX      INTEGER { other(1) }
        MIN-ACCESS  read-only
        DESCRIPTION
            "Only other(1) needs to be supported."
  
        -- hpnicfmplsXCTable
  
        OBJECT      hpnicfmplsXCLabelStackIndex
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is not required."
  
        OBJECT      hpnicfmplsXCIsPersistent
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is not required."
  
        OBJECT      hpnicfmplsXCAdminStatus
        SYNTAX      INTEGER { up(1), down(2) }
        MIN-ACCESS  read-only
        DESCRIPTION
            "A value of testing(3) need not be supported."
  
        OBJECT      hpnicfmplsXCOperStatus
        SYNTAX      INTEGER { up(1), down(2) }
        DESCRIPTION
            "Only up(1) and down(2) need to be supported."
        
        OBJECT      hpnicfmplsXCRowStatus
        SYNTAX      INTEGER { active(1),
                               notInService(2),
                               createAndGo(4),
                               destroy(6) }
        MIN-ACCESS  read-only
        DESCRIPTION
            "The notReady(3) and createAndWait(5) states need
             not be supported."
        
        OBJECT      hpnicfmplsXCStorageType
        SYNTAX      INTEGER { other(1) }
        MIN-ACCESS  read-only
        DESCRIPTION
            "Only other(1) needs to be supported."
  
     ::= { hpnicfmplsLsrCompliances 1 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'StorageType', 'RowPointer', 'TimeStamp'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Counter32', 'Unsigned32', 'Counter64', 'Gauge32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'HPN-ICF-OID-MIB': ['hpnicfMpls'], 'INET-ADDRESS-MIB': ['InetAddressIPv4', 'InetAddressIPv6', 'InetAddressType'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}

  · Archived source file

  Related source files and packages:

  • Netdisco archive revision metadata (not a manufacturer release date)File: repos/netdisco/netdisco-mibs/commits/master; 15,422 bytes
  • Netdisco MIB distribution at the selected archive revision38.9 MiB
  
  Source location: HPN-ICF-MPLS-LSR-MIB::hpnicfmplsLsrModuleCompliance.
  Source version and references

  Downloaded: 2026-10-24T15:28:10.548993+00:00.