{1 3 6 1 4 1 11 2 14 11 15 8 12 2 1 6 2}
The hpnicfMplsLdpCrlspErHopTable is used to indicate the hops, strict or loose, for an MPLS CRLSP tunnel defined in hpnicfMplsLdpCrlspTnlTable. There must be atleast one entry in this table for each CRLSP tunnel that is supported in the hpnicfMplsLdpCrlspTnlTable. The first row in the table is the first hop after the origination point of the tunnel.
Status in source: current.
Names: hpnicfMplsLdpCrlspErHopTable
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"hpnicfMplsLdpCrlspErHopTable",
"OBJECT-TYPE",
"SYNTAX",
"SEQUENCE",
"OF",
"HpnicfMplsLdpCrlspErHopEntry",
"MAX-ACCESS",
"not-accessible",
"STATUS",
"current",
"DESCRIPTION",
"\"The hpnicfMplsLdpCrlspErHopTable is used to indicate the hops, strict or loose, for an MPLS CRLSP tunnel defined in hpnicfMplsLdpCrlspTnlTable. There must be atleast one entry in this table for each CRLSP tunnel that is supported in the hpnicfMplsLdpCrlspTnlTable. The first row in the table is the first hop after the origination point of the tunnel.\"",
"::=",
"{",
"hpnicfMplsLdpCrlspTnlObjects",
"2",
"}"
],
"syntax_tree": [
[
"conceptualTable",
[
"row",
"HpnicfMplsLdpCrlspErHopEntry"
]
],
null,
[
"MaxAccessPart",
"not-accessible"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The hpnicfMplsLdpCrlspErHopTable is used to indicate the hops, strict or loose, for an MPLS CRLSP tunnel defined in hpnicfMplsLdpCrlspTnlTable. There must be atleast one entry in this table for each CRLSP tunnel that is supported in the hpnicfMplsLdpCrlspTnlTable. The first row in the table is the first hop after the origination point of the tunnel."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPN-ICF-MPLS-LDP-MIB
hpnicfMplsLdpCrlspErHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpnicfMplsLdpCrlspErHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The hpnicfMplsLdpCrlspErHopTable is used to indicate the hops,
strict or loose, for an MPLS CRLSP tunnel defined in
hpnicfMplsLdpCrlspTnlTable.
There must be atleast one entry in this table for each CRLSP tunnel
that is supported in the hpnicfMplsLdpCrlspTnlTable.
The first row in the table is the
first hop after the origination point of the tunnel."
::= { hpnicfMplsLdpCrlspTnlObjects 2 }{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'TimeInterval'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'Integer32', 'Counter32', 'Unsigned32', 'IpAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'HPN-ICF-OID-MIB': ['hpnicfMpls']}Related source files and packages:
Downloaded: 2026-10-23T19:25:41.388272+00:00.
Vendor MIB copy from the Netdisco archive.
Module: HPN-ICF-MPLS-LDP-MIB
hpnicfMplsLdpCrlspErHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpnicfMplsLdpCrlspErHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The hpnicfMplsLdpCrlspErHopTable is used to indicate the hops,
strict or loose, for an MPLS CRLSP tunnel defined in
hpnicfMplsLdpCrlspTnlTable.
There must be atleast one entry in this table for each CRLSP tunnel
that is supported in the hpnicfMplsLdpCrlspTnlTable.
The first row in the table is the
first hop after the origination point of the tunnel."
::= { hpnicfMplsLdpCrlspTnlObjects 2 }{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'TimeInterval'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'Integer32', 'Counter32', 'Unsigned32', 'IpAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'HPN-ICF-OID-MIB': ['hpnicfMpls']}Related source files and packages:
Downloaded: 2026-10-24T15:28:10.547993+00:00.
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.2.1 | hpnicfMplsLdpCrlspErHopEntry | 6 | 6 |
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1 | hpnicfMplsLdpCrlspTnlTable | 1 | 16 |