{1 3 6 1 4 1 11 2 14 11 5 1 7 1 29 1 7 2 1 3}
This MIB object is used to remove the slot configuration. Setting this object to true (1) will remove the module configuration. Default value is false (2). This object should always returns false (2). The module can be configured by setting the hpSwitchModuleConfigModType to a supported Jnumber on the device.
Status in source: current.
Names: hpSwitchModuleConfigModRemove
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"hpSwitchModuleConfigModRemove",
"OBJECT-TYPE",
"SYNTAX",
"TruthValue",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This MIB object is used to remove the slot configuration. Setting this object to true (1) will remove the module configuration. Default value is false (2). This object should always returns false (2). The module can be configured by setting the hpSwitchModuleConfigModType to a supported Jnumber on the device.\"",
"::=",
"{",
"hpSwitchModuleConfigEntry",
"3",
"}"
],
"syntax_tree": [
[
"row",
"TruthValue"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This MIB object is used to remove the slot configuration. Setting this object to true (1) will remove the module configuration. Default value is false (2). This object should always returns false (2). The module can be configured by setting the hpSwitchModuleConfigModType to a supported Jnumber on the device."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HP-SWITCH-BASIC-CONFIG-MIB
hpSwitchModuleConfigModRemove OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object is used to remove the slot
configuration. Setting this object to true (1)
will remove the module configuration.
Default value is false (2).
This object should always returns false (2).
The module can be configured by setting the
hpSwitchModuleConfigModType to a supported
Jnumber on the device."
::= { hpSwitchModuleConfigEntry 3 }{'IF-MIB': ['InterfaceIndex'], 'SMON-MIB': ['portCopyEntry'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'DateAndTime', 'TruthValue'], 'CONFIG-MIB': ['hpSwitchConfig', 'hpSwitchFilterConfig', 'hpSwitchIgmpConfig'], 'ENTITY-MIB': ['entPhysicalIndex'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'Integer32', 'IpAddress', 'Unsigned32', 'NOTIFICATION-TYPE', 'Counter32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'Q-BRIDGE-MIB': ['PortList'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Downloaded: 2026-10-23T19:25:41.393272+00:00.
Vendor MIB copy from the Netdisco archive.
Module: HP-SWITCH-BASIC-CONFIG-MIB
hpSwitchModuleConfigModRemove OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object is used to remove the slot
configuration. Setting this object to true (1)
will remove the module configuration.
Default value is false (2).
This object should always returns false (2).
The module can be configured by setting the
hpSwitchModuleConfigModType to a supported
Jnumber on the device."
::= { hpSwitchModuleConfigEntry 3 }{'IF-MIB': ['InterfaceIndex'], 'SMON-MIB': ['portCopyEntry'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'DateAndTime', 'TruthValue'], 'CONFIG-MIB': ['hpSwitchConfig', 'hpSwitchFilterConfig', 'hpSwitchIgmpConfig'], 'ENTITY-MIB': ['entPhysicalIndex'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'Integer32', 'IpAddress', 'Unsigned32', 'NOTIFICATION-TYPE', 'Counter32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'Q-BRIDGE-MIB': ['PortList'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Downloaded: 2026-10-24T15:28:10.602992+00:00.
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7.2.1.1 | hpSwitchModuleConfigModType | 0 | 0 | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7.2.1.2 | hpSwitchModuleConfigModName | 0 | 0 |