Status in source: mandatory.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"hpSwitchDSCPRateLimitKbps",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"-",
"1",
".",
".",
"10000000",
")",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"The rate limit in kilobits per second for a row of the DSCP rate limit table. Incoming traffic with the DSCP field of the IP header matching the index of the row will be limited to this rate and excess traffic will be dropped. On some devices, the actual traffic rate allowed may be slightly higher or lower due to hardware limitations. A value of -1 indicates no limit and is the default. Setting a value of -1 will clear all rate limits for the codepoint. The rate limit is only applied on the ports set in the hpSwitchDSCPRateLimitPorts column of the row.\"",
"::=",
"{",
"hpSwitchDSCPRateLimitConfigEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
-1,
10000000
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"The rate limit in kilobits per second for a row of the DSCP rate limit table. Incoming traffic with the DSCP field of the IP header matching the index of the row will be limited to this rate and excess traffic will be dropped. On some devices, the actual traffic rate allowed may be slightly higher or lower due to hardware limitations. A value of -1 indicates no limit and is the default. Setting a value of -1 will clear all rate limits for the codepoint. The rate limit is only applied on the ports set in the hpSwitchDSCPRateLimitPorts column of the row."
],
null,
null,
null,
null
]
}