OID reference
1.3.6.1.4.1.11.2.26.14.5.1.7
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fl…
Identification
{1 3 6 1 4 1 11 2 26 14 5 1 7}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: rlOspfNetLnkAreaId, rlOspfNetLnkLsid, rlOspfNetLnkRouterId, rlOspfNetLnkIdx.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11.2.26.14.5.1.7
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rlOspfNetLnkChecksum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented without updating the checksum.
The checksum used is the same that is used for ISO
connectionless datagrams; it is commonly referred
to as the Fletcher checksum."
REFERENCE
"OSPF Version 2, Section 12.1.7 LS checksum"
::= { rlOspfNetLnkEntry 7 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlOspfNetLnkChecksum
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlOspfNetLnkChecksum",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.\"",
"REFERENCE",
"\"OSPF Version 2, Section 12.1.7 LS checksum\"",
"::=",
"{",
"rlOspfNetLnkEntry",
"7",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum."
],
[
"REFERENCE",
"OSPF Version 2, Section 12.1.7 LS checksum"
],
null,
null,
null
]
}Module: HPE-IpRouter
See published definition above
{'HPE-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec'], 'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Same file in HPE Instant On 1960 2.8.1.35.
Module: HPE-IpRouter
{'HPE-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec'], 'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-IpRouter
{'HPE-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec'], 'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.26.14.5.1.1 | rlOspfNetLnkAreaId | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.14.5.1.2 | rlOspfNetLnkLsid | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.14.5.1.3 | rlOspfNetLnkRouterId | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.14.5.1.4 | rlOspfNetLnkIdx | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.14.5.1.5 | rlOspfNetLnkSequence | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.14.5.1.6 | rlOspfNetLnkAge | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.14.5.1.8 | rlOspfNetLnkLength | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.14.5.1.9 | rlOspfNetLnkMask | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.14.5.1.10 | rlOspfNetLnkAttRouter | 0 | 0 |