OID reference
1.3.6.1.4.1.11.2.26.14.8.1.8
Data traffic for the advertised destination will be forwarded to this address. If the Forwarding address is set to 0.0.0.0, data traffic will be forwarded instead to the LSA's originator (i.e., the responsible AS boundary router).
Identification
{1 3 6 1 4 1 11 2 26 14 8 1 8}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: rlOspfAseLnkLsid, rlOspfAseLnkRouterId.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11.2.26.14.8.1.8
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rlOspfAseLnkFrwAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Data traffic for the advertised destination
will be forwarded to this address. If the
Forwarding address is set to 0.0.0.0, data
traffic will be forwarded instead to the LSA's
originator (i.e., the responsible AS boundary router)."
::= { rlOspfAseLnkEntry 8 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Data traffic for the advertised destination will be forwarded to this address. If the Forwarding address is set to 0.0.0.0, data traffic will be forwarded instead to the LSA's originator (i.e., the responsible AS boundary router).
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlOspfAseLnkFrwAddress
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlOspfAseLnkFrwAddress",
"OBJECT-TYPE",
"SYNTAX",
"IpAddress",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Data traffic for the advertised destination will be forwarded to this address. If the Forwarding address is set to 0.0.0.0, data traffic will be forwarded instead to the LSA's originator (i.e., the responsible AS boundary router).\"",
"::=",
"{",
"rlOspfAseLnkEntry",
"8",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"IpAddress",
null
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Data traffic for the advertised destination will be forwarded to this address. If the Forwarding address is set to 0.0.0.0, data traffic will be forwarded instead to the LSA's originator (i.e., the responsible AS boundary router)."
],
null,
null,
null,
null
]
}Module: HPE-IpRouter
See published definition above
{'HPE-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec'], 'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Same file in HPE Instant On 1960 2.8.1.35.
Module: HPE-IpRouter
{'HPE-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec'], 'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-IpRouter
{'HPE-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec'], 'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.26.14.8.1.1 | rlOspfAseLnkLsid | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.14.8.1.2 | rlOspfAseLnkRouterId | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.14.8.1.3 | rlOspfAseLnkSequence | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.14.8.1.4 | rlOspfAseLnkAge | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.14.8.1.5 | rlOspfAseLnkChecksum | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.14.8.1.6 | rlOspfAseLnkLength | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.14.8.1.7 | rlOspfAseLnkMask | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.14.8.1.9 | rlOspfAseLnkBitE | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.14.8.1.10 | rlOspfAseLnkMetric | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.14.8.1.11 | rlOspfAseLnkTag | 0 | 0 |