OID reference
1.3.6.1.4.1.11.2.26.20.1.7
Enables or disables sending of ICMP IPv6 redirect messages to re-send a packet through the same interface on which the packet was received.
Identification
{1 3 6 1 4 1 11 2 26 20 1 7}
| Value | Name |
|---|---|
| 1 | enable |
| 2 | disable |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published AUGMENTS row: ipv6InterfaceEntry. Check that row's index definition for the instance suffix.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11.2.26.20.1.7
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rlipv6InterfaceIcmpRedirectSendEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enables or disables sending of ICMP IPv6 redirect messages to
re-send a packet through the same interface on which the packet was
received."
DEFVAL { enable }
::= { rlipv6InterfaceEntry 7 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Enables or disables sending of ICMP IPv6 redirect messages to re-send a packet through the same interface on which the packet was received.
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlipv6InterfaceIcmpRedirectSendEnable
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlipv6InterfaceIcmpRedirectSendEnable",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enable",
"(",
"1",
")",
",",
"disable",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Enables or disables sending of ICMP IPv6 redirect messages to re-send a packet through the same interface on which the packet was received.\"",
"DEFVAL",
"{",
"enable",
"}",
"::=",
"{",
"rlipv6InterfaceEntry",
"7",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enable",
1
],
[
"disable",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Enables or disables sending of ICMP IPv6 redirect messages to re-send a packet through the same interface on which the packet was received."
],
null,
null,
null,
[
"DEFVAL",
"enable"
]
]
}Module: HPE-IPv6
See published definition above
{'HPE-IP': ['ipSpec'], 'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['ipAddressEntry', 'ipv6InterfaceEntry', 'ipNetToPhysicalEntry', 'ipv6RouterAdvertEntry'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TimeInterval', 'TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'IpAddress', 'mib-2', 'Unsigned32', 'Counter64', 'zeroDotZero', 'Gauge32'], 'IANAifType-MIB': ['IANAtunnelType'], 'IP-FORWARD-MIB': ['inetCidrRouteEntry'], 'IANA-RTPROTO-MIB': ['IANAipRouteProtocol'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddressType', 'InetAddress', 'InetAutonomousSystemNumber']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Same file in HPE Instant On 1960 2.8.1.35.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-IPv6
{'HPE-IP': ['ipSpec'], 'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['ipAddressEntry', 'ipv6InterfaceEntry', 'ipNetToPhysicalEntry', 'ipv6RouterAdvertEntry'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TimeInterval', 'TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'IpAddress', 'mib-2', 'Unsigned32', 'Counter64', 'zeroDotZero', 'Gauge32'], 'IANAifType-MIB': ['IANAtunnelType'], 'IP-FORWARD-MIB': ['inetCidrRouteEntry'], 'IANA-RTPROTO-MIB': ['IANAipRouteProtocol'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddressType', 'InetAddress', 'InetAutonomousSystemNumber']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.26.20.1.1 | rlipv6InterfaceNdDadAttemps | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.20.1.2 | rlipv6InterfaceAutoconfigEnable | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.20.1.3 | rlipv6InterfaceIcmpUnreachSendEnable | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.20.1.4 | rlipv6InterfaceLinkMTU | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.20.1.5 | rlipv6InterfaceMLDVersion | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.20.1.6 | rlipv6InterfaceRetransmitTime | 0 | 0 |