OID reference
1.3.6.1.4.1.11.2.26.28.1.2
Destination internetwork address or subnet address. The destination prefix length is applied to this value, and to a particular destination address, to determine whether the route applies to the particular address. If the prefix length is L, then applying the length to an address means taking the first L bits of the a…
Identification
{1 3 6 1 4 1 11 2 26 28 1 2}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rlInetStaticRouteDest OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Destination internetwork address or subnet address. The
destination prefix length is applied to this value, and to a
particular destination address, to determine whether the route
applies to the particular address.
If the prefix length is L, then applying the length to an address
means taking the first L bits of the address."
::= { rlInetStaticRouteEntry 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Destination internetwork address or subnet address. The destination prefix length is applied to this value, and to a particular destination address, to determine whether the route applies to the particular address. If the prefix length is L, then applying the length to an address means taking the first L bits of the address.
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlInetStaticRouteDest
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlInetStaticRouteDest",
"OBJECT-TYPE",
"SYNTAX",
"InetAddress",
"MAX-ACCESS",
"not-accessible",
"STATUS",
"current",
"DESCRIPTION",
"\"Destination internetwork address or subnet address. The destination prefix length is applied to this value, and to a particular destination address, to determine whether the route applies to the particular address. If the prefix length is L, then applying the length to an address means taking the first L bits of the address.\"",
"::=",
"{",
"rlInetStaticRouteEntry",
"2",
"}"
],
"syntax_tree": [
[
"row",
"InetAddress"
],
null,
[
"MaxAccessPart",
"not-accessible"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Destination internetwork address or subnet address. The destination prefix length is applied to this value, and to a particular destination address, to determine whether the route applies to the particular address. If the prefix length is L, then applying the length to an address means taking the first L bits of the address."
],
null,
null,
null,
null
]
}Module: HPE-IPv6
See published definition above
{'HPE-IP': ['ipSpec'], 'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['ipAddressEntry', 'ipv6InterfaceEntry', 'ipNetToPhysicalEntry', 'ipv6RouterAdvertEntry'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TimeInterval', 'TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'IpAddress', 'mib-2', 'Unsigned32', 'Counter64', 'zeroDotZero', 'Gauge32'], 'IANAifType-MIB': ['IANAtunnelType'], 'IP-FORWARD-MIB': ['inetCidrRouteEntry'], 'IANA-RTPROTO-MIB': ['IANAipRouteProtocol'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddressType', 'InetAddress', 'InetAutonomousSystemNumber']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Same file in HPE Instant On 1960 2.8.1.35.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-IPv6
{'HPE-IP': ['ipSpec'], 'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['ipAddressEntry', 'ipv6InterfaceEntry', 'ipNetToPhysicalEntry', 'ipv6RouterAdvertEntry'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TimeInterval', 'TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'IpAddress', 'mib-2', 'Unsigned32', 'Counter64', 'zeroDotZero', 'Gauge32'], 'IANAifType-MIB': ['IANAtunnelType'], 'IP-FORWARD-MIB': ['inetCidrRouteEntry'], 'IANA-RTPROTO-MIB': ['IANAipRouteProtocol'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddressType', 'InetAddress', 'InetAutonomousSystemNumber']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.26.28.1.1 | rlInetStaticRouteDestType | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.28.1.3 | rlInetStaticRoutePfxLen | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.28.1.4 | rlInetStaticRouteNextHopType | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.28.1.5 | rlInetStaticRouteNextHop | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.28.1.6 | rlInetStaticRouteIfIndex | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.28.1.7 | rlInetStaticRoutePathCost | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.28.1.8 | rlInetStaticRouteType | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.28.1.9 | rlInetStaticRouteOwner | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.28.1.10 | rlInetStaticRouteRowStatus | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.28.1.11 | rlInetStaticRouteForwardingStatus | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.28.1.12 | rlInetStaticRouteTrackObject | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.28.1.13 | rlInetStaticRouteTrackStatus | 0 | 0 |