OID reference
1.3.6.1.4.1.11.2.26.3.1.1.2
This variable defines the virtual number of hops assigned to the interface specified by rsIfIpAddrIndex. This enables fine-tuning of the RIP routing algorithm.
Identification
{1 3 6 1 4 1 11 2 26 3 1 1 2}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In HPE-IpRouter, the row index rsRip2IfConfAddress is declared as IpAddress. The IPv4 address is encoded as four numeric subidentifiers, one for each address octet. For example, a row with address 192.0.2.10 has the instance .1.3.6.1.4.1.11.2.26.3.1.1.2.192.0.2.10. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
Published row index: rsRip2IfConfAddress.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11.2.26.3.1.1.2
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rsRip2IfConfVirtualDis OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable defines the virtual number of hops assigned to
the interface specified by rsIfIpAddrIndex. This enables
fine-tuning of the RIP routing algorithm."
DEFVAL { 1 }
::= { rsRip2IfConfEntry 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This variable defines the virtual number of hops assigned to the interface specified by rsIfIpAddrIndex. This enables fine-tuning of the RIP routing algorithm.
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rsRip2IfConfVirtualDis
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rsRip2IfConfVirtualDis",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This variable defines the virtual number of hops assigned to the interface specified by rsIfIpAddrIndex. This enables fine-tuning of the RIP routing algorithm.\"",
"DEFVAL",
"{",
"1",
"}",
"::=",
"{",
"rsRip2IfConfEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This variable defines the virtual number of hops assigned to the interface specified by rsIfIpAddrIndex. This enables fine-tuning of the RIP routing algorithm."
],
null,
null,
null,
[
"DEFVAL",
1
]
]
}Module: HPE-IpRouter
See published definition above
{'HPE-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec'], 'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Same file in HPE Instant On 1960 2.8.1.35.
Module: HPE-IpRouter
{'HPE-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec'], 'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-IpRouter
{'HPE-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec'], 'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.26.3.1.1.1 | rsRip2IfConfAddress | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.3.1.1.3 | rlRip2IfConfKeyChain | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.3.1.1.4 | rlRip2IfConfAdminStatus | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.3.1.1.5 | rlRip2IfConfInFilteringType | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.3.1.1.6 | rlRip2IfConfOutFilteringType | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.3.1.1.7 | rlRip2IfConfInFilterListName | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.3.1.1.8 | rlRip2IfConfOutFilterListName | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.3.1.1.9 | rlRip2IfConfDefInfOriginate | 0 | 0 |