OID reference
1.3.6.1.4.1.11.2.26.31.1.11
active - An indication that the route has implication on routing inactive - the route is a backup route or it is down. It is not used in forwarding decision. Down means that the Ip interface on which it is configured is down.
Identification
{1 3 6 1 4 1 11 2 26 31 1 11}
| Value | Name |
|---|---|
| 1 | active |
| 2 | inactive |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: rlInternInetStaticRouteDestType, rlInternInetStaticRouteDest, rlInternInetStaticRoutePfxLen, rlInternInetStaticRouteNextHopType, rlInternInetStaticRouteNextHop, rlInternInetStaticRouteIfIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11.2.26.31.1.11
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rlInternInetStaticRouteForwardingStatus OBJECT-TYPE
SYNTAX INTEGER {
active (1),
inactive (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"active - An indication that the route has implication on routing
inactive - the route is a backup route or it is down. It is not used
in forwarding decision.
Down means that the Ip interface on which it is configured is down."
::= { rlInternInetStaticRouteEntry 11 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
active - An indication that the route has implication on routing inactive - the route is a backup route or it is down. It is not used in forwarding decision. Down means that the Ip interface on which it is configured is down.
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlInternInetStaticRouteForwardingStatus
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlInternInetStaticRouteForwardingStatus",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"active",
"(",
"1",
")",
",",
"inactive",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"active - An indication that the route has implication on routing inactive - the route is a backup route or it is down. It is not used in forwarding decision. Down means that the Ip interface on which it is configured is down.\"",
"::=",
"{",
"rlInternInetStaticRouteEntry",
"11",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"active",
1
],
[
"inactive",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"active - An indication that the route has implication on routing inactive - the route is a backup route or it is down. It is not used in forwarding decision. Down means that the Ip interface on which it is configured is down."
],
null,
null,
null,
null
]
}Module: HPE-IPv6
See published definition above
{'HPE-IP': ['ipSpec'], 'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['ipAddressEntry', 'ipv6InterfaceEntry', 'ipNetToPhysicalEntry', 'ipv6RouterAdvertEntry'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TimeInterval', 'TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'IpAddress', 'mib-2', 'Unsigned32', 'Counter64', 'zeroDotZero', 'Gauge32'], 'IANAifType-MIB': ['IANAtunnelType'], 'IP-FORWARD-MIB': ['inetCidrRouteEntry'], 'IANA-RTPROTO-MIB': ['IANAipRouteProtocol'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddressType', 'InetAddress', 'InetAutonomousSystemNumber']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Same file in HPE Instant On 1960 2.8.1.35.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-IPv6
{'HPE-IP': ['ipSpec'], 'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['ipAddressEntry', 'ipv6InterfaceEntry', 'ipNetToPhysicalEntry', 'ipv6RouterAdvertEntry'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TimeInterval', 'TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'IpAddress', 'mib-2', 'Unsigned32', 'Counter64', 'zeroDotZero', 'Gauge32'], 'IANAifType-MIB': ['IANAtunnelType'], 'IP-FORWARD-MIB': ['inetCidrRouteEntry'], 'IANA-RTPROTO-MIB': ['IANAipRouteProtocol'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddressType', 'InetAddress', 'InetAutonomousSystemNumber']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.26.31.1.1 | rlInternInetStaticRouteDestType | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.31.1.2 | rlInternInetStaticRouteDest | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.31.1.3 | rlInternInetStaticRoutePfxLen | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.31.1.4 | rlInternInetStaticRouteNextHopType | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.31.1.5 | rlInternInetStaticRouteNextHop | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.31.1.6 | rlInternInetStaticRouteIfIndex | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.31.1.7 | rlInternInetStaticRoutePathCost | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.31.1.8 | rlInternInetStaticRouteType | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.31.1.9 | rlInternInetStaticRouteOwner | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.31.1.10 | rlInternInetStaticRouteRowStatus | 0 | 0 |