The table specifies IPv4 and IPv6 source interfaces per application. Only supported applications are present in the table.
Sources for this description
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
OID reference
1.3.6.1.4.1.11.2.26.35
The table specifies IPv4 and IPv6 source interfaces per application. Only supported applications are present in the table.
Identification
{1 3 6 1 4 1 11 2 26 35}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rlSourceAddressSelectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlSourceAddressSelectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table specifies IPv4 and IPv6 source
interfaces per application. Only supported
applications are present in the table."
::= { ipSpec 35 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The table specifies IPv4 and IPv6 source interfaces per application. Only supported applications are present in the table.
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlSourceAddressSelectionTable
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlSourceAddressSelectionTable",
"OBJECT-TYPE",
"SYNTAX",
"SEQUENCE",
"OF",
"RlSourceAddressSelectionEntry",
"MAX-ACCESS",
"not-accessible",
"STATUS",
"current",
"DESCRIPTION",
"\"The table specifies IPv4 and IPv6 source interfaces per application. Only supported applications are present in the table.\"",
"::=",
"{",
"ipSpec",
"35",
"}"
],
"syntax_tree": [
[
"conceptualTable",
[
"row",
"RlSourceAddressSelectionEntry"
]
],
null,
[
"MaxAccessPart",
"not-accessible"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The table specifies IPv4 and IPv6 source interfaces per application. Only supported applications are present in the table."
],
null,
null,
null,
null
]
}Module: HPE-IP
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex', 'InterfaceIndex'], 'IP-MIB': ['ipAddrEntry', 'IpAddressOriginTC', 'IpAddressStatusTC'], 'HPE-MIB': ['nm'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'PhysAddress', 'TimeStamp', 'RowPointer', 'TestAndIncr', 'StorageType'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'IP-FORWARD-MIB': ['ipCidrRouteEntry', 'ipCidrRouteDest', 'ipCidrRouteMask', 'ipCidrRouteTos', 'ipCidrRouteNextHop'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength', 'InetVersion', 'InetZoneIndex']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1830 2.5.0.48.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1960 2.8.1.35.
Module: HPE-IP
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'IP-MIB': ['ipAddrEntry', 'IpAddressOriginTC', 'IpAddressStatusTC'], 'HPE-MIB': ['nm'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'PhysAddress', 'TimeStamp', 'RowPointer', 'TestAndIncr', 'StorageType'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'IP-FORWARD-MIB': ['ipCidrRouteEntry', 'ipCidrRouteDest', 'ipCidrRouteMask', 'ipCidrRouteTos', 'ipCidrRouteNextHop'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength', 'InetVersion', 'InetZoneIndex']}Same file in HPE Instant On 1930 2.6.0.73.
Same file in HPE Instant On 1930 2.5.0.42.
Same file in HPE Instant On 1930 2.8.1.35.
Same file in HPE Instant On 1930 3.2.0.8.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-IP
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'IP-MIB': ['ipAddrEntry', 'IpAddressOriginTC', 'IpAddressStatusTC'], 'HPE-MIB': ['nm'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'PhysAddress', 'TimeStamp', 'RowPointer', 'TestAndIncr', 'StorageType'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'IP-FORWARD-MIB': ['ipCidrRouteEntry', 'ipCidrRouteDest', 'ipCidrRouteMask', 'ipCidrRouteTos', 'ipCidrRouteNextHop'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength', 'InetVersion', 'InetZoneIndex']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.26.35.1 | rlSourceAddressSelectionEntry | 3 | 3 |
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.26.1 | rsIpAddrTable | 1 | 16 | |
| 1.3.6.1.4.1.11.2.26.2 | icmpSpec | 2 | 11 | |
| 1.3.6.1.4.1.11.2.26.3 | rip2Spec | 10 | 20 | |
| 1.3.6.1.4.1.11.2.26.4 | arpSpec | 11 | 19 | |
| 1.3.6.1.4.1.11.2.26.5 | tftp | 8 | 8 | |
| 1.3.6.1.4.1.11.2.26.6 | ipRedundancy | 3 | 10 | |
| 1.3.6.1.4.1.11.2.26.7 | ipRouteLeaking | 5 | 5 | |
| 1.3.6.1.4.1.11.2.26.8 | ipRipFilter | 2 | 19 | |
| 1.3.6.1.4.1.11.2.26.9 | rsRipEnable | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.11 | rsTelnetPassword | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.12 | rlTranslationNameToIpTable | 1 | 3 | |
| 1.3.6.1.4.1.11.2.26.13 | rlIpRoutingProtPreference | 8 | 8 | |
| 1.3.6.1.4.1.11.2.26.14 | rlOspf | 9 | 72 | |
| 1.3.6.1.4.1.11.2.26.15 | rlIpAddrTableMibVersion | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.16 | rlIpCidrRouteExtTable | 1 | 2 | |
| 1.3.6.1.4.1.11.2.26.17 | rlIpStaticRoute | 1 | 12 | |
| 1.3.6.1.4.1.11.2.26.18 | rlIpRouter | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.19 | rlIpAddressTable | 1 | 3 | |
| 1.3.6.1.4.1.11.2.26.20 | rlipv6InterfaceTable | 1 | 8 | |
| 1.3.6.1.4.1.11.2.26.21 | rlinetCidrRouteTable | 1 | 3 | |
| 1.3.6.1.4.1.11.2.26.22 | rlipNetToPhysicalTable | 1 | 3 | |
| 1.3.6.1.4.1.11.2.26.23 | rlIpAddressesNumber | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.24 | rlIpStaticPrefixesNumber | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.25 | rlIpTotalPrefixesNumber | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.28 | rlInetStaticRouteTable | 1 | 14 | |
| 1.3.6.1.4.1.11.2.26.29 | rlInetRoutingDistanceTable | 1 | 7 | |
| 1.3.6.1.4.1.11.2.26.30 | rlInternInetCidrRouteTable | 1 | 20 | |
| 1.3.6.1.4.1.11.2.26.31 | rlInternInetStaticRouteTable | 1 | 12 | |
| 1.3.6.1.4.1.11.2.26.32 | rlManagementIpv4 | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.33 | rlManagementIpv4Action | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.34 | rlManagementIpIfindex | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.36 | rlIpAddressTable | 1 | 16 | |
| 1.3.6.1.4.1.11.2.26.37 | rlIpDefaultDSCP | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.38 | rlIpDefaultUP | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.39 | rlIpv4MtuSize | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.40 | rlIcmpCountersClear | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.41 | rlIpCountersClear | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.42 | rlManagementIpPortIfindex | 0 | 0 |