OID reference
1.3.6.1.4.1.11.2.26.36.1.8
The status of the address, describing if the address can be used for communication. In the absence of other information, an IPv4 address is always preferred(1).
Identification
{1 3 6 1 4 1 11 2 26 36 1 8}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rlIpAddressStatus OBJECT-TYPE
SYNTAX IpAddressStatusTC
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the address, describing if the address can be
used for communication.
In the absence of other information, an IPv4 address is
always preferred(1)."
DEFVAL { preferred }
::= { rlIpAddressEntry 8 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The status of the address, describing if the address can be used for communication. In the absence of other information, an IPv4 address is always preferred(1).
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlIpAddressStatus
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlIpAddressStatus",
"OBJECT-TYPE",
"SYNTAX",
"IpAddressStatusTC",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"The status of the address, describing if the address can be used for communication. In the absence of other information, an IPv4 address is always preferred(1).\"",
"DEFVAL",
"{",
"preferred",
"}",
"::=",
"{",
"rlIpAddressEntry",
"8",
"}"
],
"syntax_tree": [
[
"row",
"IpAddressStatusTC"
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The status of the address, describing if the address can be used for communication. In the absence of other information, an IPv4 address is always preferred(1)."
],
null,
null,
null,
[
"DEFVAL",
"preferred"
]
]
}Module: HPE-IP
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex', 'InterfaceIndex'], 'IP-MIB': ['ipAddrEntry', 'IpAddressOriginTC', 'IpAddressStatusTC'], 'HPE-MIB': ['nm'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'PhysAddress', 'TimeStamp', 'RowPointer', 'TestAndIncr', 'StorageType'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'IP-FORWARD-MIB': ['ipCidrRouteEntry', 'ipCidrRouteDest', 'ipCidrRouteMask', 'ipCidrRouteTos', 'ipCidrRouteNextHop'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength', 'InetVersion', 'InetZoneIndex']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1830 2.5.0.48.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1960 2.8.1.35.
Module: HPE-IP
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'IP-MIB': ['ipAddrEntry', 'IpAddressOriginTC', 'IpAddressStatusTC'], 'HPE-MIB': ['nm'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'PhysAddress', 'TimeStamp', 'RowPointer', 'TestAndIncr', 'StorageType'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'IP-FORWARD-MIB': ['ipCidrRouteEntry', 'ipCidrRouteDest', 'ipCidrRouteMask', 'ipCidrRouteTos', 'ipCidrRouteNextHop'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength', 'InetVersion', 'InetZoneIndex']}Same file in HPE Instant On 1930 2.6.0.73.
Same file in HPE Instant On 1930 2.5.0.42.
Same file in HPE Instant On 1930 2.8.1.35.
Same file in HPE Instant On 1930 3.2.0.8.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-IP
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'IP-MIB': ['ipAddrEntry', 'IpAddressOriginTC', 'IpAddressStatusTC'], 'HPE-MIB': ['nm'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'PhysAddress', 'TimeStamp', 'RowPointer', 'TestAndIncr', 'StorageType'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'IP-FORWARD-MIB': ['ipCidrRouteEntry', 'ipCidrRouteDest', 'ipCidrRouteMask', 'ipCidrRouteTos', 'ipCidrRouteNextHop'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength', 'InetVersion', 'InetZoneIndex']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.26.36.1.1 | rlIpAddressAddrType | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.36.1.2 | rlIpAddressAddr | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.36.1.3 | rlIpAddressOrigin | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.36.1.4 | rlIpAddressGeneralPrefixName | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.36.1.5 | rlIpAddressIfIndex | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.36.1.6 | rlIpAddressExtdType | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.36.1.7 | rlIpAddressPrefix | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.36.1.9 | rlIpAddressCreated | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.36.1.10 | rlIpAddressLastChanged | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.36.1.11 | rlIpAddressRowStatus | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.36.1.12 | rlIpAddressStorageType | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.36.1.13 | rlIpAddressExtdPrefixLength | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.36.1.14 | rlIpAddressCompleteAddr | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.36.1.15 | rlIpAddressOperStatus | 0 | 0 |