OID reference
1.3.6.1.4.1.11.2.26.8.1.1.6
the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 bits are equal to those of the network IP address. If this variable has a value other than 32, than rsIpRipFilterGlbNetworkMaskBits must be 0 and is ignored.
Identification
{1 3 6 1 4 1 11 2 26 8 1 1 6}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In HPE-IpRouter, the row index consists of these components in order:
rsIpRipFilterGlbType (INTEGER): one numeric subidentifier for the non-negative value.rsIpRipFilterGlbNumber (INTEGER): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.11.2.26.8.1.1.6.<rsIpRipFilterGlbType>.<rsIpRipFilterGlbNumber>. Use values present on the device and permitted by its MIB. Other definitions can differ.
Published row index: rsIpRipFilterGlbType, rsIpRipFilterGlbNumber.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11.2.26.8.1.1.6
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rsIpRipFilterGlbMatchBits OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" the number of bits to match in the Network IP address. A value
smaller than 32 defines a wildcard. for example: the value 8 means
all routes whose leftmost 8 bits are equal to those of the network IP
address. If this variable has a value other than 32, than
rsIpRipFilterGlbNetworkMaskBits must be 0 and is ignored. "
DEFVAL {32}
::= {rsIpRipFilterGlbEntry 6}
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 bits are equal to those of the network IP address. If this variable has a value other than 32, than rsIpRipFilterGlbNetworkMaskBits must be 0 and is ignored.
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rsIpRipFilterGlbMatchBits
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rsIpRipFilterGlbMatchBits",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\" the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 bits are equal to those of the network IP address. If this variable has a value other than 32, than rsIpRipFilterGlbNetworkMaskBits must be 0 and is ignored. \"",
"DEFVAL",
"{",
"32",
"}",
"::=",
"{",
"rsIpRipFilterGlbEntry",
"6",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 bits are equal to those of the network IP address. If this variable has a value other than 32, than rsIpRipFilterGlbNetworkMaskBits must be 0 and is ignored."
],
null,
null,
null,
[
"DEFVAL",
32
]
]
}Module: HPE-IpRouter
See published definition above
{'HPE-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec'], 'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Same file in HPE Instant On 1960 2.8.1.35.
Module: HPE-IpRouter
{'HPE-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec'], 'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-IpRouter
{'HPE-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec'], 'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.26.8.1.1.1 | rsIpRipFilterGlbType | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.8.1.1.2 | rsIpRipFilterGlbNumber | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.8.1.1.3 | rsIpRipFilterGlbStatus | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.8.1.1.4 | rsIpRipFilterGlbIpAddr | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.8.1.1.5 | rsIpRipFilterGlbNetworkMaskBits | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.8.1.1.7 | rsIpRipFilterGlbAction | 0 | 0 |