OID reference
1.3.6.1.4.1.11.2.26.8.2.1.6
the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0
Identification
{1 3 6 1 4 1 11 2 26 8 2 1 6}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In HPE-IpRouter, the row index consists of these components in order:
rsIpRipFilterLclIpIntf (IpAddress): four numeric subidentifiers, one per IPv4 address octet.rsIpRipFilterLclType (INTEGER): one numeric subidentifier for the non-negative value.rsIpRipFilterLclNumber (INTEGER): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.11.2.26.8.2.1.6.<rsIpRipFilterLclIpIntf: four octets>.<rsIpRipFilterLclType>.<rsIpRipFilterLclNumber>. Use values present on the device and permitted by its MIB. Other definitions can differ.
Published row index: rsIpRipFilterLclIpIntf, rsIpRipFilterLclType, rsIpRipFilterLclNumber.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11.2.26.8.2.1.6
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rsIpRipFilterLclNetworkMaskBits OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" the number of bits in the IP Network mask, called network-prefix-length
in Router Requirements terminology. for example: the value 16 means
mask 255.255.0.0 "
DEFVAL {0}
::= {rsIpRipFilterLclEntry 6}
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rsIpRipFilterLclNetworkMaskBits
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rsIpRipFilterLclNetworkMaskBits",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\" the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0 \"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"rsIpRipFilterLclEntry",
"6",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Module: HPE-IpRouter
See published definition above
{'HPE-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec'], 'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Same file in HPE Instant On 1960 2.8.1.35.
Module: HPE-IpRouter
{'HPE-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec'], 'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-IpRouter
{'HPE-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec'], 'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.26.8.2.1.1 | rsIpRipFilterLclIpIntf | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.8.2.1.2 | rsIpRipFilterLclType | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.8.2.1.3 | rsIpRipFilterLclNumber | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.8.2.1.4 | rsIpRipFilterLclStatus | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.8.2.1.5 | rsIpRipFilterLclIpAddr | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.8.2.1.7 | rsIpRipFilterLclMatchBits | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.8.2.1.8 | rsIpRipFilterLclAction | 0 | 0 |