OID reference
1.3.6.1.4.1.11.2.43.1.1.3
This variable specifies whether this interface should operate in half duplex or full duplex mode. This specification will take effect only if swIfSpeedDuplexAutoNegotiation is disabled. A value of 'none' is returned if a value of the variable hasn't been set.
Identification
{1 3 6 1 4 1 11 2 43 1 1 3}
| Value | Name |
|---|---|
| 1 | none |
| 2 | half |
| 3 | full |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In HPE-rlInterfaces, the row index swIfIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.11.2.43.1.1.3.<swIfIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
Published row index: swIfIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11.2.43.1.1.3
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
swIfDuplexAdminMode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
half(2),
full(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable specifies whether this interface should operate in
half duplex or full duplex mode. This specification will take effect
only if swIfSpeedDuplexAutoNegotiation is disabled.
A value of 'none' is returned if a value of the variable
hasn't been set."
DEFVAL { none }
::= { swIfEntry 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This variable specifies whether this interface should operate in half duplex or full duplex mode. This specification will take effect only if swIfSpeedDuplexAutoNegotiation is disabled. A value of 'none' is returned if a value of the variable hasn't been set.
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: swIfDuplexAdminMode
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swIfDuplexAdminMode",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"none",
"(",
"1",
")",
",",
"half",
"(",
"2",
")",
",",
"full",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This variable specifies whether this interface should operate in half duplex or full duplex mode. This specification will take effect only if swIfSpeedDuplexAutoNegotiation is disabled. A value of 'none' is returned if a value of the variable hasn't been set.\"",
"DEFVAL",
"{",
"none",
"}",
"::=",
"{",
"swIfEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"none",
1
],
[
"half",
2
],
[
"full",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This variable specifies whether this interface should operate in half duplex or full duplex mode. This specification will take effect only if swIfSpeedDuplexAutoNegotiation is disabled. A value of 'none' is returned if a value of the variable hasn't been set."
],
null,
null,
null,
[
"DEFVAL",
"none"
]
]
}Module: HPE-rlInterfaces
See published definition above
{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero'], 'HPE-MIB': ['nm', 'rlIfInterfaces'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION', 'DisplayString'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'Q-BRIDGE-MIB': ['PortList']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1830 2.5.0.48.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Module: HPE-rlInterfaces
{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero'], 'HPE-MIB': ['nm', 'rlIfInterfaces'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION', 'DisplayString'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'Q-BRIDGE-MIB': ['PortList']}Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-rlInterfaces
{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero'], 'HPE-MIB': ['nm', 'rlIfInterfaces'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION', 'DisplayString'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'Q-BRIDGE-MIB': ['PortList']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.43.1.1.1 | swIfIndex | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.2 | swIfPhysAddressType | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.4 | swIfDuplexOperMode | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.5 | swIfBackPressureMode | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.6 | swIfTaggedMode | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.7 | swIfTransceiverType | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.8 | swIfLockAdminStatus | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.9 | swIfLockOperStatus | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.10 | swIfType | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.11 | swIfDefaultTag | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.12 | swIfDefaultPriority | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.13 | swIfStatus | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.14 | swIfFlowControlMode | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.15 | swIfSpeedAdminMode | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.16 | swIfSpeedDuplexAutoNegotiation | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.17 | swIfOperFlowControlMode | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.18 | swIfOperSpeedDuplexAutoNegotiation | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.19 | swIfOperBackPressureMode | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.20 | swIfAdminLockAction | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.21 | swIfOperLockAction | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.22 | swIfAdminLockTrapEnable | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.23 | swIfOperLockTrapEnable | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.24 | swIfOperSuspendedStatus | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.25 | swIfLockOperTrapCount | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.26 | swIfLockAdminTrapFrequency | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.27 | swIfReActivate | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.28 | swIfAdminMdix | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.29 | swIfOperMdix | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.30 | swIfHostMode | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.31 | swIfSingleHostViolationAdminAction | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.32 | swIfSingleHostViolationOperAction | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.33 | swIfSingleHostViolationAdminTrapEnable | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.34 | swIfSingleHostViolationOperTrapEnable | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.35 | swIfSingleHostViolationOperTrapCount | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.36 | swIfSingleHostViolationAdminTrapFrequency | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.37 | swIfLockLimitationMode | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.38 | swIfLockMaxMacAddresses | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.39 | swIfLockMacAddressesCount | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.40 | swIfAdminSpeedDuplexAutoNegotiationLocalCapabilities | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.41 | swIfOperSpeedDuplexAutoNegotiationLocalCapabilities | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.42 | swIfSpeedDuplexNegotiationRemoteCapabilities | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.43 | swIfAdminComboMode | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.44 | swIfOperComboMode | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.45 | swIfAutoNegotiationMasterSlavePreference | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.46 | swIfPortCapabilities | 0 | 0 | |
| 1.3.6.1.4.1.11.2.43.1.1.47 | swIfPortStateDuration | 0 | 0 |