Status in source: current.
Names: rlHistoryControlBucketsGranted
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlHistoryControlBucketsGranted",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"1",
".",
".",
"65535",
")",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The number of discrete sampling intervals over which data shall be saved in the part of the rlHistory table associated with this rlHistoryControlEntry. When the associated rlHistoryControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources. The probe must not lower this value except as a result of a modification to the associated rlHistoryControlBucketsRequested object. There will be times when the actual number of buckets associated with this entry is less than the value of this object. In this case, at the end of each sampling interval, a new bucket will be added to the rlHistory table. When the number of buckets reaches the value of this object and a new bucket is to be added to the media-specific table, the oldest bucket associated with this rlHistoryControlEntry shall be deleted by the agent so that the new bucket can be added. When the value of this object changes to a value less than the current value, entries are deleted from the rlHistory table. Enough of the oldest of these entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated rlHistory table entries may be allowed to grow.\"",
"::=",
"{",
"rlHistoryControlEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
1,
65535
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The number of discrete sampling intervals over which data shall be saved in the part of the rlHistory table associated with this rlHistoryControlEntry. When the associated rlHistoryControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources. The probe must not lower this value except as a result of a modification to the associated rlHistoryControlBucketsRequested object. There will be times when the actual number of buckets associated with this entry is less than the value of this object. In this case, at the end of each sampling interval, a new bucket will be added to the rlHistory table. When the number of buckets reaches the value of this object and a new bucket is to be added to the media-specific table, the oldest bucket associated with this rlHistoryControlEntry shall be deleted by the agent so that the new bucket can be added. When the value of this object changes to a value less than the current value, entries are deleted from the rlHistory table. Enough of the oldest of these entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated rlHistory table entries may be allowed to grow."
],
null,
null,
null,
null
]
}
- HPE Instant On official MIBs
· Publisher's source file: hpe-rmon.mib
Module: HPE-RMON
See published definition above
Module imports
{'HPE-MIB': ['nm'], 'RMON-MIB': ['OwnerString', 'EntryStatus', 'etherStatsEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'TimeTicks', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Same file in HPE Instant On 1960 2.8.1.35.
- HPE networking MIB copies (LibreNMS/Observium Community)
· Publisher's source file: Source package: observium-community-latest.tar.gz
Vendor MIB copy from the Observium Community archive.
HPE networking support.
Module: HPE-RMON
Same published definition
Module imports
{'HPE-MIB': ['nm'], 'RMON-MIB': ['OwnerString', 'EntryStatus', 'etherStatsEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'TimeTicks', 'MODULE-IDENTITY', 'OBJECT-TYPE']}
Related source files and packages: