OID reference
1.3.6.1.4.1.11.2.57.2.6.1.10
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
Identification
{1 3 6 1 4 1 11 2 57 2 6 1 10}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In HPE-BRIDGEMIBOBJECTS-MIB, the row index rldot1dStpVlan is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.11.2.57.2.6.1.10.<rldot1dStpVlan>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
Published row index: rldot1dStpVlan.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11.2.57.2.6.1.10
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rldot1dStpHoldTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.14"
::= { rldot1dStpVlanEntry 10 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rldot1dStpHoldTime
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rldot1dStpHoldTime",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.\"",
"REFERENCE",
"\"IEEE 802.1D-1990: Section 4.5.3.14\"",
"::=",
"{",
"rldot1dStpVlanEntry",
"10",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second."
],
[
"REFERENCE",
"IEEE 802.1D-1990: Section 4.5.3.14"
],
null,
null,
null
]
}Module: HPE-BRIDGEMIBOBJECTS-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dBasePort', 'dot1dStpPort', 'MacAddress'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'Counter32'], 'RFC1155-SMI': ['Counter'], 'Q-BRIDGE-MIB': ['PortList'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1830 2.5.0.48.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Module: HPE-BRIDGEMIBOBJECTS-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dBasePort', 'dot1dStpPort', 'MacAddress'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'Counter32'], 'RFC1155-SMI': ['Counter'], 'Q-BRIDGE-MIB': ['PortList'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-BRIDGEMIBOBJECTS-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dBasePort', 'dot1dStpPort', 'MacAddress'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'Counter32'], 'RFC1155-SMI': ['Counter'], 'Q-BRIDGE-MIB': ['PortList'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.57.2.6.1.1 | rldot1dStpVlan | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.6.1.2 | rldot1dStpVlanEnable | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.6.1.3 | rldot1dStpTimeSinceTopologyChange | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.6.1.4 | rldot1dStpTopChanges | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.6.1.5 | rldot1dStpDesignatedRoot | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.6.1.6 | rldot1dStpRootCost | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.6.1.7 | rldot1dStpRootPort | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.6.1.8 | rldot1dStpMaxAge | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.6.1.9 | rldot1dStpHelloTime | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.6.1.11 | rldot1dStpForwardDelay | 0 | 0 |