New mode of spaning tree supported by the device after the next reset.
Sources for this description
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
OID reference
1.3.6.1.4.1.11.2.57.2.9
New mode of spaning tree supported by the device after the next reset.
Identification
{1 3 6 1 4 1 11 2 57 2 9}
| Value | Name |
|---|---|
| 1 | perDevice |
| 4 | mstp |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.11.2.57.2.9.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rldot1dStpTypeAfterReset OBJECT-TYPE
SYNTAX INTEGER {
perDevice(1),
mstp(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New mode of spaning tree supported by the device after the next reset."
DEFVAL { perDevice }
::= { rldot1dStp 9 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
New mode of spaning tree supported by the device after the next reset.
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rldot1dStpTypeAfterReset
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rldot1dStpTypeAfterReset",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"perDevice",
"(",
"1",
")",
",",
"mstp",
"(",
"4",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"New mode of spaning tree supported by the device after the next reset.\"",
"DEFVAL",
"{",
"perDevice",
"}",
"::=",
"{",
"rldot1dStp",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"perDevice",
1
],
[
"mstp",
4
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"New mode of spaning tree supported by the device after the next reset."
],
null,
null,
null,
[
"DEFVAL",
"perDevice"
]
]
}Module: HPE-BRIDGEMIBOBJECTS-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dBasePort', 'dot1dStpPort', 'MacAddress'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'Counter32'], 'RFC1155-SMI': ['Counter'], 'Q-BRIDGE-MIB': ['PortList'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1830 2.5.0.48.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Module: HPE-BRIDGEMIBOBJECTS-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dBasePort', 'dot1dStpPort', 'MacAddress'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'Counter32'], 'RFC1155-SMI': ['Counter'], 'Q-BRIDGE-MIB': ['PortList'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-BRIDGEMIBOBJECTS-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dBasePort', 'dot1dStpPort', 'MacAddress'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'Counter32'], 'RFC1155-SMI': ['Counter'], 'Q-BRIDGE-MIB': ['PortList'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.57.2.1 | rldot1dStpMibVersion | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.2 | rldot1dStpType | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.3 | rldot1dStpEnable | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.4 | rldot1dStpPortMustBelongToVlan | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.5 | rldot1dStpExtendedPortNumberFormat | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.6 | rldot1dStpVlanTable | 1 | 12 | |
| 1.3.6.1.4.1.11.2.57.2.7 | rldot1dStpVlanPortTable | 1 | 12 | |
| 1.3.6.1.4.1.11.2.57.2.8 | rldot1dStpTrapVariable | 2 | 2 | |
| 1.3.6.1.4.1.11.2.57.2.10 | rldot1dStpMonitorTime | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.11 | rldot1dStpBpduCount | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.12 | rldot1dStpLastChanged | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.13 | rldot1dStpPortTable | 1 | 14 | |
| 1.3.6.1.4.1.11.2.57.2.14 | rldot1dStpPortsEnable | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.15 | rldot1dStpTaggedFlooding | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.16 | rldot1dStpPortBelongToVlanDefault | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.17 | rldot1dStpEnableByDefault | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.18 | rldot1dStpPortToDefault | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.19 | rldot1dStpSupportedType | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.20 | rldot1dStpEdgeportSupportInStp | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.21 | rldot1dStpFilterBpdu | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.22 | rldot1dStpFloodBpduMethod | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.23 | rldot1dStpSeparatedBridges | 3 | 5 | |
| 1.3.6.1.4.1.11.2.57.2.24 | rldot1dStpPortBpduGuardTable | 1 | 2 | |
| 1.3.6.1.4.1.11.2.57.2.25 | rldot1dStpLoopbackGuardEnable | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.2.26 | rldot1dStpDisabledPortStateTable | 1 | 2 | |
| 1.3.6.1.4.1.11.2.57.2.27 | rldot1dStpClearPortCounters | 0 | 0 |