Specifies whether this Bridge uses the normal RSTP algorithm, or STP Compatibility algorythm: 0 - STP Compatibility 2 - Normal RSTP
Sources for this description
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
OID reference
1.3.6.1.4.1.11.2.57.4.2.1.2
Specifies whether this Bridge uses the normal RSTP algorithm, or STP Compatibility algorythm: 0 - STP Compatibility 2 - Normal RSTP
Identification
{1 3 6 1 4 1 11 2 57 4 2 1 2}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In HPE-BRIDGEMIBOBJECTS-MIB, the row index rldot1wRStpForceVersionVlan is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.11.2.57.4.2.1.2.<rldot1wRStpForceVersionVlan>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
Published row index: rldot1wRStpForceVersionVlan.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11.2.57.4.2.1.2
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rldot1wRStpForceVersionState OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether this Bridge uses the normal RSTP algorithm,
or STP Compatibility algorythm:
0 - STP Compatibility
2 - Normal RSTP"
REFERENCE
"IEEE 802.1wd9-2000: Section 17.16.1 "
DEFVAL { 2 }
::= { rldot1wRStpForceVersionEntry 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Specifies whether this Bridge uses the normal RSTP algorithm, or STP Compatibility algorythm: 0 - STP Compatibility 2 - Normal RSTP
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rldot1wRStpForceVersionState
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rldot1wRStpForceVersionState",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Specifies whether this Bridge uses the normal RSTP algorithm, or STP Compatibility algorythm: 0 - STP Compatibility 2 - Normal RSTP\"",
"REFERENCE",
"\"IEEE 802.1wd9-2000: Section 17.16.1 \"",
"DEFVAL",
"{",
"2",
"}",
"::=",
"{",
"rldot1wRStpForceVersionEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specifies whether this Bridge uses the normal RSTP algorithm, or STP Compatibility algorythm: 0 - STP Compatibility 2 - Normal RSTP"
],
[
"REFERENCE",
"IEEE 802.1wd9-2000: Section 17.16.1"
],
null,
null,
[
"DEFVAL",
2
]
]
}Module: HPE-BRIDGEMIBOBJECTS-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dBasePort', 'dot1dStpPort', 'MacAddress'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'Counter32'], 'RFC1155-SMI': ['Counter'], 'Q-BRIDGE-MIB': ['PortList'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1830 2.5.0.48.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Module: HPE-BRIDGEMIBOBJECTS-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dBasePort', 'dot1dStpPort', 'MacAddress'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'Counter32'], 'RFC1155-SMI': ['Counter'], 'Q-BRIDGE-MIB': ['PortList'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-BRIDGEMIBOBJECTS-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dBasePort', 'dot1dStpPort', 'MacAddress'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'Counter32'], 'RFC1155-SMI': ['Counter'], 'Q-BRIDGE-MIB': ['PortList'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.57.4.2.1.1 | rldot1wRStpForceVersionVlan | 0 | 0 |