OID reference
1.3.6.1.4.1.11.2.57.6.2.1.4
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpVlanPortEnable), t…
Identification
{1 3 6 1 4 1 11 2 57 6 2 1 4}
| Value | Name |
|---|---|
| 1 | disabled |
| 2 | blocking |
| 3 | listening |
| 4 | learning |
| 5 | forwarding |
| 6 | broken |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In HPE-BRIDGEMIBOBJECTS-MIB, the row index consists of these components in order:
rldot1sMstpInstancePortMstiId (INTEGER): one numeric subidentifier for the non-negative value.rldot1sMstpInstancePortPort (INTEGER): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.11.2.57.6.2.1.4.<rldot1sMstpInstancePortMstiId>.<rldot1sMstpInstancePortPort>. Use values present on the device and permitted by its MIB. Other definitions can differ.
Published row index: rldot1sMstpInstancePortMstiId, rldot1sMstpInstancePortPort.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11.2.57.6.2.1.4
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rldot1sMstpInstancePortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
blocking(2),
listening(3),
learning(4),
forwarding(5),
broken(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's current state as defined by application of
the Spanning Tree Protocol. This state controls what
action a port takes on reception of a frame.
If the bridge has detected a port that is malfunctioning
it will place that port into the broken(6) state. For ports
which are disabled (see dot1dStpVlanPortEnable), this object
will have a value of disabled(1)."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.2"
::= { rldot1sMstpInstancePortEntry 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpVlanPortEnable), this object will have a value of disabled(1).
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rldot1sMstpInstancePortState
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rldot1sMstpInstancePortState",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"disabled",
"(",
"1",
")",
",",
"blocking",
"(",
"2",
")",
",",
"listening",
"(",
"3",
")",
",",
"learning",
"(",
"4",
")",
",",
"forwarding",
"(",
"5",
")",
",",
"broken",
"(",
"6",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpVlanPortEnable), this object will have a value of disabled(1).\"",
"REFERENCE",
"\"IEEE 802.1D-1990: Section 4.5.5.2\"",
"::=",
"{",
"rldot1sMstpInstancePortEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"disabled",
1
],
[
"blocking",
2
],
[
"listening",
3
],
[
"learning",
4
],
[
"forwarding",
5
],
[
"broken",
6
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpVlanPortEnable), this object will have a value of disabled(1)."
],
[
"REFERENCE",
"IEEE 802.1D-1990: Section 4.5.5.2"
],
null,
null,
null
]
}Module: HPE-BRIDGEMIBOBJECTS-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dBasePort', 'dot1dStpPort', 'MacAddress'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'Counter32'], 'RFC1155-SMI': ['Counter'], 'Q-BRIDGE-MIB': ['PortList'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1830 2.5.0.48.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Module: HPE-BRIDGEMIBOBJECTS-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dBasePort', 'dot1dStpPort', 'MacAddress'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'Counter32'], 'RFC1155-SMI': ['Counter'], 'Q-BRIDGE-MIB': ['PortList'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-BRIDGEMIBOBJECTS-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dBasePort', 'dot1dStpPort', 'MacAddress'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'Counter32'], 'RFC1155-SMI': ['Counter'], 'Q-BRIDGE-MIB': ['PortList'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.57.6.2.1.1 | rldot1sMstpInstancePortMstiId | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.6.2.1.2 | rldot1sMstpInstancePortPort | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.6.2.1.3 | rldot1sMstpInstancePortPriority | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.6.2.1.5 | rldot1sMstpInstancePortEnable | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.6.2.1.6 | rldot1sMstpInstancePortPathCost | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.6.2.1.7 | rldot1sMstpInstancePortDesignatedRoot | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.6.2.1.8 | rldot1sMstpInstancePortDesignatedCost | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.6.2.1.9 | rldot1sMstpInstancePortDesignatedBridge | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.6.2.1.10 | rldot1sMstpInstancePortDesignatedPort | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.6.2.1.11 | rldot1sMstpInstancePortForwardTransitions | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.6.2.1.12 | rldot1sMStpInstancePortAdminPathCost | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.6.2.1.13 | rldot1sMStpInstancePortRole | 0 | 0 |