OID reference
1.3.6.1.4.1.11.2.57.9.2.1.11
The operational maximum age time in seconds of PVST Protocol information learned from the network on any port before it is discarded. When configuring the maximum age, the following relationships should be maintained: 2*(Forward-Time - 1) >= Max-Age Max-Age >= 2*(Hello-Time + 1).
Identification
{1 3 6 1 4 1 11 2 57 9 2 1 11}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In HPE-BRIDGEMIBOBJECTS-MIB, the row index rlBrgPvstOperVlanId is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.11.2.57.9.2.1.11.<rlBrgPvstOperVlanId>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
Published row index: rlBrgPvstOperVlanId.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11.2.57.9.2.1.11
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rlBrgPvstOperVlanMaxAge OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational maximum age time in seconds of PVST Protocol information learned
from the network on any port before it is discarded.
When configuring the maximum age, the following relationships
should be maintained:
2*(Forward-Time - 1) >= Max-Age
Max-Age >= 2*(Hello-Time + 1)."
::= { rlBrgPvstOperVlanEntry 11 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The operational maximum age time in seconds of PVST Protocol information learned from the network on any port before it is discarded. When configuring the maximum age, the following relationships should be maintained: 2*(Forward-Time - 1) >= Max-Age Max-Age >= 2*(Hello-Time + 1).
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlBrgPvstOperVlanMaxAge
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlBrgPvstOperVlanMaxAge",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The operational maximum age time in seconds of PVST Protocol information learned from the network on any port before it is discarded. When configuring the maximum age, the following relationships should be maintained: 2*(Forward-Time - 1) >= Max-Age Max-Age >= 2*(Hello-Time + 1).\"",
"::=",
"{",
"rlBrgPvstOperVlanEntry",
"11",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The operational maximum age time in seconds of PVST Protocol information learned from the network on any port before it is discarded. When configuring the maximum age, the following relationships should be maintained: 2*(Forward-Time - 1) >= Max-Age Max-Age >= 2*(Hello-Time + 1)."
],
null,
null,
null,
null
]
}Module: HPE-BRIDGEMIBOBJECTS-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dBasePort', 'dot1dStpPort', 'MacAddress'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'Counter32'], 'RFC1155-SMI': ['Counter'], 'Q-BRIDGE-MIB': ['PortList'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1830 2.5.0.48.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Module: HPE-BRIDGEMIBOBJECTS-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dBasePort', 'dot1dStpPort', 'MacAddress'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'Counter32'], 'RFC1155-SMI': ['Counter'], 'Q-BRIDGE-MIB': ['PortList'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-BRIDGEMIBOBJECTS-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dBasePort', 'dot1dStpPort', 'MacAddress'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'Counter32'], 'RFC1155-SMI': ['Counter'], 'Q-BRIDGE-MIB': ['PortList'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.57.9.2.1.1 | rlBrgPvstOperVlanId | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.9.2.1.2 | rlBrgPvstOperVlanEnable | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.9.2.1.3 | rlBrgPvstOperVlanTimeSinceTopologyChange | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.9.2.1.4 | rlBrgPvstOperVlanTopChanges | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.9.2.1.5 | rlBrgPvstOperVlanDesignatedRoot | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.9.2.1.6 | rlBrgPvstOperVlanRootCost | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.9.2.1.7 | rlBrgPvstOperVlanRootPort | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.9.2.1.8 | rlBrgPvstOperVlanRootMaxAge | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.9.2.1.9 | rlBrgPvstOperVlanRootHelloTime | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.9.2.1.10 | rlBrgPvstOperVlanRootForwardDelay | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.9.2.1.12 | rlBrgPvstOperVlanHelloTime | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.9.2.1.13 | rlBrgPvstOperVlanForwardDelay | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.9.2.1.14 | rlBrgPvstOperVlanPriority | 0 | 0 |