OID reference
1.3.6.1.4.1.11.2.57.9.3.1.3
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. Writing a value of '0' assigns the automatically calculated default Path Cost value to the port. If the default Path Cost is being used, this object returns '0' when read. Default path cost is determined by …
Identification
{1 3 6 1 4 1 11 2 57 9 3 1 3}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In HPE-BRIDGEMIBOBJECTS-MIB, the row index consists of these components in order:
rlBrgPvstPortVlanId (INTEGER): one numeric subidentifier for the non-negative value.rlBrgPvstPortPort (INTEGER): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.11.2.57.9.3.1.3.<rlBrgPvstPortVlanId>.<rlBrgPvstPortPort>. Use values present on the device and permitted by its MIB. Other definitions can differ.
Published row index: rlBrgPvstPortVlanId, rlBrgPvstPortPort.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11.2.57.9.3.1.3
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rlBrgPvstPortPathCost OBJECT-TYPE
SYNTAX INTEGER (0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port.
Writing a value of '0' assigns the automatically calculated
default Path Cost value to the port. If the default Path
Cost is being used, this object returns '0' when read.
Default path cost is determined by port speed and path cost method (long or short)."
::= { rlBrgPvstPortEntry 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. Writing a value of '0' assigns the automatically calculated default Path Cost value to the port. If the default Path Cost is being used, this object returns '0' when read. Default path cost is determined by port speed and path cost method (long or short).
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlBrgPvstPortPathCost
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlBrgPvstPortPathCost",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"200000000",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The contribution of this port to the path cost of paths towards the spanning tree root which include this port. Writing a value of '0' assigns the automatically calculated default Path Cost value to the port. If the default Path Cost is being used, this object returns '0' when read. Default path cost is determined by port speed and path cost method (long or short).\"",
"::=",
"{",
"rlBrgPvstPortEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
200000000
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The contribution of this port to the path cost of paths towards the spanning tree root which include this port. Writing a value of '0' assigns the automatically calculated default Path Cost value to the port. If the default Path Cost is being used, this object returns '0' when read. Default path cost is determined by port speed and path cost method (long or short)."
],
null,
null,
null,
null
]
}Module: HPE-BRIDGEMIBOBJECTS-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dBasePort', 'dot1dStpPort', 'MacAddress'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'Counter32'], 'RFC1155-SMI': ['Counter'], 'Q-BRIDGE-MIB': ['PortList'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1830 2.5.0.48.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Module: HPE-BRIDGEMIBOBJECTS-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dBasePort', 'dot1dStpPort', 'MacAddress'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'Counter32'], 'RFC1155-SMI': ['Counter'], 'Q-BRIDGE-MIB': ['PortList'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-BRIDGEMIBOBJECTS-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dBasePort', 'dot1dStpPort', 'MacAddress'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'Counter32'], 'RFC1155-SMI': ['Counter'], 'Q-BRIDGE-MIB': ['PortList'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.57.9.3.1.1 | rlBrgPvstPortVlanId | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.9.3.1.2 | rlBrgPvstPortPort | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.9.3.1.4 | rlBrgPvstPortPriority | 0 | 0 | |
| 1.3.6.1.4.1.11.2.57.9.3.1.5 | rlBrgPvstPortStatus | 0 | 0 |