OID reference
1.3.6.1.4.1.11.2.59.2.2.1.3
Indicates whether the corresponding byte denotes an offset from beginning of L2, from the beginning of L3 IPv4 packet data or from the beginning of L3 IPv6 packet data. Each byte in the OID contains either: (1) - L2 offset (2) - L3 Offset (3) - L3 IPv6 Offset
Identification
{1 3 6 1 4 1 11 2 59 2 2 1 3}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: rlPolicyFlowClassificationOffsetsGroupType.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11.2.59.2.2.1.3
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rlPolicyFlowClassificationOffsetsGroupOffsetType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the corresponding byte denotes an offset from beginning
of L2, from the beginning of L3 IPv4 packet data or from the beginning
of L3 IPv6 packet data.
Each byte in the OID contains either:
(1) - L2 offset
(2) - L3 Offset
(3) - L3 IPv6 Offset"
::= { rlPolicyFlowClassificationOffsetsGroupEntry 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Indicates whether the corresponding byte denotes an offset from beginning of L2, from the beginning of L3 IPv4 packet data or from the beginning of L3 IPv6 packet data. Each byte in the OID contains either: (1) - L2 offset (2) - L3 Offset (3) - L3 IPv6 Offset
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlPolicyFlowClassificationOffsetsGroupOffsetType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlPolicyFlowClassificationOffsetsGroupOffsetType",
"OBJECT-TYPE",
"SYNTAX",
"OBJECT",
"IDENTIFIER",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Indicates whether the corresponding byte denotes an offset from beginning of L2, from the beginning of L3 IPv4 packet data or from the beginning of L3 IPv6 packet data. Each byte in the OID contains either: (1) - L2 offset (2) - L3 Offset (3) - L3 IPv6 Offset\"",
"::=",
"{",
"rlPolicyFlowClassificationOffsetsGroupEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"OBJECT IDENTIFIER",
null
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Indicates whether the corresponding byte denotes an offset from beginning of L2, from the beginning of L3 IPv4 packet data or from the beginning of L3 IPv6 packet data. Each byte in the OID contains either: (1) - L2 offset (2) - L3 Offset (3) - L3 IPv6 Offset"
],
null,
null,
null,
null
]
}Module: HPE-POLICY-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'HPE-MIB': ['Percents', 'VlanPriority', 'nm'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'RowPointer', 'DisplayString'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'IpAddress', 'Unsigned32', 'Counter32', 'zeroDotZero', 'MODULE-IDENTITY', 'Counter64'], 'Q-BRIDGE-MIB': ['PortList', 'VlanId'], 'DIFF-SERV-MIB': ['diffServClassifierEntry'], 'HPE-BRIDGEMIBOBJECTS-MIB': ['VlanList1', 'VlanList2', 'VlanList3', 'VlanList4']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Same file in HPE Instant On 1960 2.8.1.35.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-POLICY-MIB
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'HPE-MIB': ['Percents', 'VlanPriority', 'nm'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'RowPointer', 'DisplayString'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'IpAddress', 'Unsigned32', 'Counter32', 'zeroDotZero', 'MODULE-IDENTITY', 'Counter64'], 'Q-BRIDGE-MIB': ['PortList', 'VlanId'], 'DIFF-SERV-MIB': ['diffServClassifierEntry'], 'HPE-BRIDGEMIBOBJECTS-MIB': ['VlanList1', 'VlanList2', 'VlanList3', 'VlanList4']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.59.2.2.1.1 | rlPolicyFlowClassificationOffsetsGroupType | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.2.2.1.2 | rlPolicyFlowClassificationOffsetsGroupOffset | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.2.2.1.4 | rlPolicyFlowClassificationOffsetsGroupMask | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.2.2.1.5 | rlPolicyFlowClassificationOffsetsGroupUseInputInterface | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.2.2.1.6 | rlPolicyFlowClassificationOffsetsGroupUseOutputInterface | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.2.2.1.7 | rlPolicyFlowClassificationOffsetsGroupUseVlanId | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.2.2.1.8 | rlPolicyFlowClassificationOffsetsGroupStatus | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.2.2.1.9 | rlPolicyFlowClassificationOffsetsGroupUseVPTId | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.2.2.1.10 | rlPolicyFlowClassificationOffsetsGroupUseEtherTypeId | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.2.2.1.11 | rlPolicyFlowClassificationOffsetsGroupUseInnerVlanId | 0 | 0 |