OID reference
1.3.6.1.4.1.11.2.59.5.2.1.8
This paramer is used at non diffserv mode to attached the drop precedence for packet InProfile (metering), only if there is a support for drop precedence and with what level.
Identification
{1 3 6 1 4 1 11 2 59 5 2 1 8}
| Value | Name |
|---|---|
| 1 | low |
| 2 | medium |
| 3 | high |
| 4 | drop |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In HPE-POLICY-MIB, the row index rlPolicyActionIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.11.2.59.5.2.1.8.<rlPolicyActionIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
Published row index: rlPolicyActionIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11.2.59.5.2.1.8
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rlPolicyActionNonDsInProfileDropPrecedence OBJECT-TYPE
SYNTAX INTEGER {
low(1),
medium(2),
high(3),
drop(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This paramer is used at non diffserv mode to attached the drop precedence
for packet InProfile (metering), only if there is a support for drop precedence
and with what level."
DEFVAL{ low }
::= { rlPolicyActionEntry 8}
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This paramer is used at non diffserv mode to attached the drop precedence for packet InProfile (metering), only if there is a support for drop precedence and with what level.
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlPolicyActionNonDsInProfileDropPrecedence
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlPolicyActionNonDsInProfileDropPrecedence",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"low",
"(",
"1",
")",
",",
"medium",
"(",
"2",
")",
",",
"high",
"(",
"3",
")",
",",
"drop",
"(",
"4",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This paramer is used at non diffserv mode to attached the drop precedence for packet InProfile (metering), only if there is a support for drop precedence and with what level.\"",
"DEFVAL",
"{",
"low",
"}",
"::=",
"{",
"rlPolicyActionEntry",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"low",
1
],
[
"medium",
2
],
[
"high",
3
],
[
"drop",
4
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This paramer is used at non diffserv mode to attached the drop precedence for packet InProfile (metering), only if there is a support for drop precedence and with what level."
],
null,
null,
null,
[
"DEFVAL",
"low"
]
]
}Module: HPE-POLICY-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'HPE-MIB': ['Percents', 'VlanPriority', 'nm'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'RowPointer', 'DisplayString'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'IpAddress', 'Unsigned32', 'Counter32', 'zeroDotZero', 'MODULE-IDENTITY', 'Counter64'], 'Q-BRIDGE-MIB': ['PortList', 'VlanId'], 'DIFF-SERV-MIB': ['diffServClassifierEntry'], 'HPE-BRIDGEMIBOBJECTS-MIB': ['VlanList1', 'VlanList2', 'VlanList3', 'VlanList4']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Same file in HPE Instant On 1960 2.8.1.35.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-POLICY-MIB
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'HPE-MIB': ['Percents', 'VlanPriority', 'nm'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'RowPointer', 'DisplayString'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'IpAddress', 'Unsigned32', 'Counter32', 'zeroDotZero', 'MODULE-IDENTITY', 'Counter64'], 'Q-BRIDGE-MIB': ['PortList', 'VlanId'], 'DIFF-SERV-MIB': ['diffServClassifierEntry'], 'HPE-BRIDGEMIBOBJECTS-MIB': ['VlanList1', 'VlanList2', 'VlanList3', 'VlanList4']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.59.5.2.1.1 | rlPolicyActionIndex | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.5.2.1.2 | rlPolicyActionNewDscp | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.5.2.1.3 | rlPolicyActionChangeDscp | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.5.2.1.4 | rlPolicyActionMinThreshold | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.5.2.1.5 | rlPolicyActionMaxThreshold | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.5.2.1.6 | rlPolicyActionDropPolicy | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.5.2.1.7 | rlPolicyActionDroppedPackets | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.5.2.1.9 | rlPolicyActionNonDsOutProfileDropPrecedence | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.5.2.1.10 | rlPolicyActionChangeVpt | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.5.2.1.11 | rlPolicyActionNewVpt | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.5.2.1.12 | rlPolicyActionServiceClassPointer | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.5.2.1.13 | rlPolicyActionStatus | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.5.2.1.14 | rlPolicyActionChangeDscpNonConform | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.5.2.1.15 | rlPolicyActionChangeNewDscpNonConform | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.5.2.1.16 | rlPolicyActionAdvancedTrustMode | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.5.2.1.17 | rlPolicyActionNewIpPrecedence | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.5.2.1.18 | rlPolicyActionChangeIpPrecedence | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.5.2.1.19 | rlPolicyActionReDirect | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.5.2.1.20 | rlPolicyActionNewInterface | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.5.2.1.21 | rlPolicyActionChangeVidAction | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.5.2.1.22 | rlPolicyActionNewVid | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.5.2.1.23 | rlPolicyActionTrapTypeId | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.5.2.1.24 | rlPolicyActionAddTunnel | 0 | 0 |