OID reference
1.3.6.1.4.1.11.2.59.6.3
Specifies the Service Class table preform active action (usuarlly after set of entries at the service class tentative table). Specifies the current status of a table, there could be two options, tentative/active table. only the tentative table is the read-write and the active table is read-only. at set to activeAction…
Identification
{1 3 6 1 4 1 11 2 59 6 3}
| Value | Name |
|---|---|
| 1 | active |
| 2 | notActive |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.11.2.59.6.3.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rlPolicyActiveServiceClassTable OBJECT-TYPE
SYNTAX INTEGER {
active(1),
notActive(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Service Class table preform active action
(usuarlly after set of entries at the service class tentative table).
Specifies the current status of a table, there could be two options,
tentative/active table. only the tentative table is the read-write
and the active table is read-only. at set to activeAction the
tentative table will be copied to the active table."
::= { rlPolicyServiceClass 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Specifies the Service Class table preform active action (usuarlly after set of entries at the service class tentative table). Specifies the current status of a table, there could be two options, tentative/active table. only the tentative table is the read-write and the active table is read-only. at set to activeAction the tentative table will be copied to the active table.
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlPolicyActiveServiceClassTable
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlPolicyActiveServiceClassTable",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"active",
"(",
"1",
")",
",",
"notActive",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Specifies the Service Class table preform active action (usuarlly after set of entries at the service class tentative table). Specifies the current status of a table, there could be two options, tentative/active table. only the tentative table is the read-write and the active table is read-only. at set to activeAction the tentative table will be copied to the active table.\"",
"::=",
"{",
"rlPolicyServiceClass",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"active",
1
],
[
"notActive",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specifies the Service Class table preform active action (usuarlly after set of entries at the service class tentative table). Specifies the current status of a table, there could be two options, tentative/active table. only the tentative table is the read-write and the active table is read-only. at set to activeAction the tentative table will be copied to the active table."
],
null,
null,
null,
null
]
}Module: HPE-POLICY-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'HPE-MIB': ['Percents', 'VlanPriority', 'nm'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'RowPointer', 'DisplayString'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'IpAddress', 'Unsigned32', 'Counter32', 'zeroDotZero', 'MODULE-IDENTITY', 'Counter64'], 'Q-BRIDGE-MIB': ['PortList', 'VlanId'], 'DIFF-SERV-MIB': ['diffServClassifierEntry'], 'HPE-BRIDGEMIBOBJECTS-MIB': ['VlanList1', 'VlanList2', 'VlanList3', 'VlanList4']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Same file in HPE Instant On 1960 2.8.1.35.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-POLICY-MIB
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'HPE-MIB': ['Percents', 'VlanPriority', 'nm'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'RowPointer', 'DisplayString'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'IpAddress', 'Unsigned32', 'Counter32', 'zeroDotZero', 'MODULE-IDENTITY', 'Counter64'], 'Q-BRIDGE-MIB': ['PortList', 'VlanId'], 'DIFF-SERV-MIB': ['diffServClassifierEntry'], 'HPE-BRIDGEMIBOBJECTS-MIB': ['VlanList1', 'VlanList2', 'VlanList3', 'VlanList4']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.59.6.1 | rlPolicyServiceClassPlatDependParams | 2 | 2 | |
| 1.3.6.1.4.1.11.2.59.6.2 | rlPolicyDefaultServiceClass | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.6.4 | rlPolicyServiceClassTentativeTable | 1 | 25 | |
| 1.3.6.1.4.1.11.2.59.6.5 | rlPolicyServiceClassActiveTable | 1 | 24 | |
| 1.3.6.1.4.1.11.2.59.6.6 | rlPolicyPortConfigurationTable | 1 | 15 | |
| 1.3.6.1.4.1.11.2.59.6.7 | rlPolicyDropProfileTable | 1 | 17 | |
| 1.3.6.1.4.1.11.2.59.6.8 | rlPolicyVlanConfigurationTable | 1 | 6 |