LCLI Timeout indicates the interval in seconds, that the system waits until user input is detected on telnet LCLI.
Sources for this description
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
OID reference
1.3.6.1.4.1.11.2.74.7
LCLI Timeout indicates the interval in seconds, that the system waits until user input is detected on telnet LCLI.
Identification
{1 3 6 1 4 1 11 2 74 7}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rlLCliTelnetTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0..3932159)
-- (0..65535*60+59)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LCLI Timeout indicates the interval in seconds, that
the system waits until user input is detected on telnet LCLI."
DEFVAL {600}
::= { rlLCli 7 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
LCLI Timeout indicates the interval in seconds, that the system waits until user input is detected on telnet LCLI.
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlLCliTelnetTimeout
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlLCliTelnetTimeout",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"0",
".",
".",
"3932159",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"LCLI Timeout indicates the interval in seconds, that the system waits until user input is detected on telnet LCLI.\"",
"DEFVAL",
"{",
"600",
"}",
"::=",
"{",
"rlLCli",
"7",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
0,
3932159
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"LCLI Timeout indicates the interval in seconds, that the system waits until user input is detected on telnet LCLI."
],
null,
null,
null,
[
"DEFVAL",
600
]
]
}Module: HPE-rlLcli-MIB
See published definition above
{'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['Unsigned32', 'TimeTicks', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1830 2.5.0.48.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-rlLcli-MIB
{'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['Unsigned32', 'TimeTicks', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.74.1 | rlLCliMibVersion | 0 | 0 | |
| 1.3.6.1.4.1.11.2.74.2 | rlLCliTimeout | 0 | 0 | |
| 1.3.6.1.4.1.11.2.74.3 | rlLCliHistoryEnable | 0 | 0 | |
| 1.3.6.1.4.1.11.2.74.4 | rlLCliHistorySize | 0 | 0 | |
| 1.3.6.1.4.1.11.2.74.5 | rlLcliCommandLevelTable | 1 | 7 | |
| 1.3.6.1.4.1.11.2.74.6 | rlLCliSshTimeout | 0 | 0 | |
| 1.3.6.1.4.1.11.2.74.8 | rlLCliTelnetHistoryEnable | 0 | 0 | |
| 1.3.6.1.4.1.11.2.74.9 | rlLCliTelnetHistorySize | 0 | 0 | |
| 1.3.6.1.4.1.11.2.74.10 | rlLCliSshHistoryEnable | 0 | 0 | |
| 1.3.6.1.4.1.11.2.74.11 | rlLCliSshHistorySize | 0 | 0 |