OID reference
1.3.6.1.4.1.11.2.82.2.10
This is a count of messages not sent to the console because the severity level of the message was above rlSyslogMinLogToConsoleSeverity, the higher the level, the lower the severity.
Identification
{1 3 6 1 4 1 11 2 82 2 10}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 32 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.11.2.82.2.10.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rlSyslogConsoleMessagesIgnored OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of messages not sent to the console
because the severity level of the message was above
rlSyslogMinLogToConsoleSeverity, the higher the level,
the lower the severity."
::= { rlSyslogPrivate 10 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This is a count of messages not sent to the console because the severity level of the message was above rlSyslogMinLogToConsoleSeverity, the higher the level, the lower the severity.
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlSyslogConsoleMessagesIgnored
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlSyslogConsoleMessagesIgnored",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This is a count of messages not sent to the console because the severity level of the message was above rlSyslogMinLogToConsoleSeverity, the higher the level, the lower the severity.\"",
"::=",
"{",
"rlSyslogPrivate",
"10",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This is a count of messages not sent to the console because the severity level of the message was above rlSyslogMinLogToConsoleSeverity, the higher the level, the lower the severity."
],
null,
null,
null,
null
]
}Module: HPE-SYSLOG-MIB
See published definition above
{'HPE-MIB': ['nm'], 'SNMPv2-TC': ['DisplayString', 'TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'IpAddress', 'Unsigned32', 'Counter32', 'MODULE-IDENTITY'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1830 2.5.0.48.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Module: HPE-SYSLOG-MIB
{'HPE-MIB': ['nm'], 'SNMPv2-TC': ['DisplayString', 'TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'IpAddress', 'Unsigned32', 'Counter32', 'MODULE-IDENTITY'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-SYSLOG-MIB
{'HPE-MIB': ['nm'], 'SNMPv2-TC': ['DisplayString', 'TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'IpAddress', 'Unsigned32', 'Counter32', 'MODULE-IDENTITY'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.82.2.1 | rlSyslogGlobalEnable | 0 | 0 | |
| 1.3.6.1.4.1.11.2.82.2.2 | rlSyslogMinLogToConsoleSeverity | 0 | 0 | |
| 1.3.6.1.4.1.11.2.82.2.3 | rlSyslogMinLogToFileSeverity | 0 | 0 | |
| 1.3.6.1.4.1.11.2.82.2.4 | rlSyslogMinLogToCacheSeverity | 0 | 0 | |
| 1.3.6.1.4.1.11.2.82.2.5 | rlSyslogClearLogfile | 0 | 0 | |
| 1.3.6.1.4.1.11.2.82.2.6 | rlSyslogClearCache | 0 | 0 | |
| 1.3.6.1.4.1.11.2.82.2.7 | rlSyslogMibVersion | 0 | 0 | |
| 1.3.6.1.4.1.11.2.82.2.8 | rlSyslogLogTable | 1 | 10 | |
| 1.3.6.1.4.1.11.2.82.2.9 | rlSyslogLogCacheTable | 1 | 10 | |
| 1.3.6.1.4.1.11.2.82.2.11 | rlSyslogFileMessagesIgnored | 0 | 0 | |
| 1.3.6.1.4.1.11.2.82.2.12 | rlSyslogFileMessagesLogged | 0 | 0 | |
| 1.3.6.1.4.1.11.2.82.2.13 | rlSyslogCacheTotalMessages | 0 | 0 | |
| 1.3.6.1.4.1.11.2.82.2.14 | rlSyslogAggregationEnable | 0 | 0 | |
| 1.3.6.1.4.1.11.2.82.2.15 | rlSyslogAggregationAgingTime | 0 | 0 | |
| 1.3.6.1.4.1.11.2.82.2.16 | rlSyslogMinLogToWebSeverity | 0 | 0 | |
| 1.3.6.1.4.1.11.2.82.2.17 | rlSyslogAlarmFlag | 0 | 0 | |
| 1.3.6.1.4.1.11.2.82.2.18 | rlSyslogOriginId | 0 | 0 | |
| 1.3.6.1.4.1.11.2.82.2.19 | rlSyslogOriginIdString | 0 | 0 | |
| 1.3.6.1.4.1.11.2.82.2.20 | rlSyslogHeaderSendingEnabled | 0 | 0 | |
| 1.3.6.1.4.1.11.2.82.2.21 | rlSyslogCountersPerSeverityTable | 1 | 10 | |
| 1.3.6.1.4.1.11.2.82.2.22 | rlsnmpSyslogCollectorTable | 1 | 5 | |
| 1.3.6.1.4.1.11.2.82.2.23 | rlSyslogLastIndexPerSeverityTable | 1 | 10 | |
| 1.3.6.1.4.1.11.2.82.2.24 | rlSyslogFindItLogLevel, rlSyslogUnexpectedRestartTable | 1 | 10 | |
| 1.3.6.1.4.1.11.2.82.2.25 | rlSyslogFindItLogModule, rlSyslogUnexpectedRestartOccured | 0 | 0 | |
| 1.3.6.1.4.1.11.2.82.2.26 | rlSyslogUnexpectedRestartTable, rlSyslogUnexpectedRestartClear | 1 | 10 | |
| 1.3.6.1.4.1.11.2.82.2.27 | rlSyslogUnexpectedRestartOccured | 0 | 0 | |
| 1.3.6.1.4.1.11.2.82.2.28 | rlSyslogUnexpectedRestartClear | 0 | 0 |