OID reference
1.3.6.1.4.1.11.2.88.10.1.9
Peak rate value. When both this and rlQosPolicerPbs are 0 this means the mode is Single Rate and when they are both non 0 this means the mode is Two Rate.
Identification
{1 3 6 1 4 1 11 2 88 10 1 9}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In HPE-QOS-CLI-MIB, the row index rlQosPolicerIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.11.2.88.10.1.9.<rlQosPolicerIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
Published row index: rlQosPolicerIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11.2.88.10.1.9
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rlQosPolicerPir OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Peak rate value.
When both this and rlQosPolicerPbs are 0 this means the mode is Single Rate
and when they are both non 0 this means the mode is Two Rate."
::= { rlQosPolicerEntry 9 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Peak rate value. When both this and rlQosPolicerPbs are 0 this means the mode is Single Rate and when they are both non 0 this means the mode is Two Rate.
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlQosPolicerPir
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlQosPolicerPir",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"UNITS",
[
"literal",
"226b62707322"
],
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Peak rate value. When both this and rlQosPolicerPbs are 0 this means the mode is Single Rate and when they are both non 0 this means the mode is Two Rate.\"",
"::=",
"{",
"rlQosPolicerEntry",
"9",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32"
],
[
"UNITS",
"kbps"
],
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Peak rate value. When both this and rlQosPolicerPbs are 0 this means the mode is Single Rate and when they are both non 0 this means the mode is Two Rate."
],
null,
null,
null,
null
]
}Module: HPE-QOS-CLI-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'HPE-MIB': ['Percents', 'nm'], 'SNMPv2-TC': ['TruthValue', 'RowStatus', 'RowPointer', 'TEXTUAL-CONVENTION', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Gauge32', 'Unsigned32', 'IpAddress', 'TimeTicks', 'Counter64', 'OBJECT-TYPE'], 'Q-BRIDGE-MIB': ['PortList', 'VlanId'], 'HPE-POLICY-MIB': ['StatisticsDPType', 'StatisticsClearActionType'], 'HPE-BRIDGEMIBOBJECTS-MIB': ['VlanList1', 'VlanList2', 'VlanList3', 'VlanList4']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Same file in HPE Instant On 1960 2.8.1.35.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-QOS-CLI-MIB
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'HPE-MIB': ['Percents', 'nm'], 'SNMPv2-TC': ['TruthValue', 'RowStatus', 'RowPointer', 'TEXTUAL-CONVENTION', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Gauge32', 'Unsigned32', 'IpAddress', 'TimeTicks', 'Counter64', 'OBJECT-TYPE'], 'Q-BRIDGE-MIB': ['PortList', 'VlanId'], 'HPE-POLICY-MIB': ['StatisticsDPType', 'StatisticsClearActionType'], 'HPE-BRIDGEMIBOBJECTS-MIB': ['VlanList1', 'VlanList2', 'VlanList3', 'VlanList4']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.88.10.1.1 | rlQosPolicerIndex | 0 | 0 | |
| 1.3.6.1.4.1.11.2.88.10.1.2 | rlQosPolicerName | 0 | 0 | |
| 1.3.6.1.4.1.11.2.88.10.1.3 | rlQosPolicerType | 0 | 0 | |
| 1.3.6.1.4.1.11.2.88.10.1.4 | rlQosPolicerCir | 0 | 0 | |
| 1.3.6.1.4.1.11.2.88.10.1.5 | rlQosPolicerCbs | 0 | 0 | |
| 1.3.6.1.4.1.11.2.88.10.1.6 | rlQosPolicerAction | 0 | 0 | |
| 1.3.6.1.4.1.11.2.88.10.1.7 | rlQosPolicerCasPointerRemVal | 0 | 0 | |
| 1.3.6.1.4.1.11.2.88.10.1.8 | rlQosPolicerStatus | 0 | 0 | |
| 1.3.6.1.4.1.11.2.88.10.1.10 | rlQosPolicerPbs | 0 | 0 | |
| 1.3.6.1.4.1.11.2.88.10.1.11 | rlQosPolicerPeakAction | 0 | 0 |