Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"apexOutputTsConfSimulcryptMode",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"none",
"(",
"0",
")",
",",
"externalEIS",
"(",
"1",
")",
",",
"internalEIS",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This parameter is used to set the Simulcrypt mode of the output. The actual behavior is disable/enable (none/externalEIS). It can be set to externalEIS if: - The Encryption Algorithm is set to 'dvb-csa-simulcrypt' and the Operating Mode is set to 'ManualRouting' or 'udpMapping'. - The Encryption Algorithm is set to 'mc-scte-52-simulcrypt' or 'mc-csa-simulcrypt' and the Operating Mode is set to 'ManualRouting', 'udpMapping' or 'SessionControl'. It only can be none if there are no SCGs provisioned on that output TS. 'none' - Used for normal Mediacypher only encryption (CTE or Broadcast Encryption). 'externalEIS' - When Encryption Algorithm is set to 'dvb-csa-simulcrypt', it is used to indicate an external EIS can control the encryption of all services on the output. - When Encryption Algorithm is set to 'mc-scte-52-simulcrypt' or 'mc-csa-simulcrypt', it is used to indicate that APEX will act as the EIS to control encryption of all services on the output. - Only valid when: - Encryption Algorithm is set to 'dvb-csa-simulcrypt' and Operating Mode is set to 'ManualRouting' or 'udpMapping' - Encryption Algorithm is set to 'mc-scte-52-simulcrypt' or 'mc-csa-simulcrypt' and the Operating Mode is set to 'ManualRouting', 'udpMapping' or 'SessionControl'. 'internalEIS' - Not supported at this time and is invalid to select. @Commit(param=apexOutputTsConfApplyChange, value=2) \"",
"::=",
"{",
"apexOutputTsConfigEntry",
"7",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"none",
0
],
[
"externalEIS",
1
],
[
"internalEIS",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This parameter is used to set the Simulcrypt mode of the output. The actual behavior is disable/enable (none/externalEIS). It can be set to externalEIS if: - The Encryption Algorithm is set to 'dvb-csa-simulcrypt' and the Operating Mode is set to 'ManualRouting' or 'udpMapping'. - The Encryption Algorithm is set to 'mc-scte-52-simulcrypt' or 'mc-csa-simulcrypt' and the Operating Mode is set to 'ManualRouting', 'udpMapping' or 'SessionControl'. It only can be none if there are no SCGs provisioned on that output TS. 'none' - Used for normal Mediacypher only encryption (CTE or Broadcast Encryption). 'externalEIS' - When Encryption Algorithm is set to 'dvb-csa-simulcrypt', it is used to indicate an external EIS can control the encryption of all services on the output. - When Encryption Algorithm is set to 'mc-scte-52-simulcrypt' or 'mc-csa-simulcrypt', it is used to indicate that APEX will act as the EIS to control encryption of all services on the output. - Only valid when: - Encryption Algorithm is set to 'dvb-csa-simulcrypt' and Operating Mode is set to 'ManualRouting' or 'udpMapping' - Encryption Algorithm is set to 'mc-scte-52-simulcrypt' or 'mc-csa-simulcrypt' and the Operating Mode is set to 'ManualRouting', 'udpMapping' or 'SessionControl'. 'internalEIS' - Not supported at this time and is invalid to select. @Commit(param=apexOutputTsConfApplyChange, value=2)"
],
null,
null,
null,
null
]
}