OID reference

apexChassisRedundancySecondaryApexStatus

1.3.6.1.4.1.1166.1.31.22.2.1.2

Description

This parameter is applicable for an APEX where chassis redundancy is enabled. The APEX configured as primary will report the following values: These are based on its knowledge about the secondary APEX from heartbeat messages. unknown(0): State of secondary is not known (heartbeat not received). active(1): Secondary RF…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.1166.1.31.22.2.1 (apexChassisRedundancyStatusGeneral)
Node code
2
Node name
apexChassisRedundancySecondaryApexStatus
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.1166.1.31.22.2.1.2
URN notation
urn:oid:1.3.6.1.4.1.1166.1.31.22.2.1.2
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 1166 1 31 22 2 1 2}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) gi(1166) giproducts(1) apex(31) apexChassisRedundancy(22) apexChassisRedundancyStatus(2) apexChassisRedundancyStatusGeneral(1) apexChassisRedundancySecondaryApexStatus(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) giMIB(1166) giproducts(1) apex(31) apexChassisRedundancy(22) apexChassisRedundancyStatus(2) apexChassisRedundancyStatusGeneral(1) apexChassisRedundancySecondaryApexStatus(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) gi(1166) giproducts(1) apex(31) apexChassisRedundancy(22) apexChassisRedundancyStatus(2) apexChassisRedundancyStatusGeneral(1) apexChassisRedundancySecondaryApexStatus(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) giMIB(1166) giproducts(1) apex(31) apexChassisRedundancy(22) apexChassisRedundancyStatus(2) apexChassisRedundancyStatusGeneral(1) apexChassisRedundancySecondaryApexStatus(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) gi(1166) giproducts(1) apex(31) apexChassisRedundancy(22) apexChassisRedundancyStatus(2) apexChassisRedundancyStatusGeneral(1) apexChassisRedundancySecondaryApexStatus(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) giMIB(1166) giproducts(1) apex(31) apexChassisRedundancy(22) apexChassisRedundancyStatus(2) apexChassisRedundancyStatusGeneral(1) apexChassisRedundancySecondaryApexStatus(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) gi(1166) giproducts(1) apex(31) apexChassisRedundancy(22) apexChassisRedundancyStatus(2) apexChassisRedundancyStatusGeneral(1) apexChassisRedundancySecondaryApexStatus(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) giMIB(1166) giproducts(1) apex(31) apexChassisRedundancy(22) apexChassisRedundancyStatus(2) apexChassisRedundancyStatusGeneral(1) apexChassisRedundancySecondaryApexStatus(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) gi(1166) giproducts(1) apex(31) apexChassisRedundancy(22) apexChassisRedundancyStatus(2) apexChassisRedundancyStatusGeneral(1) apexChassisRedundancySecondaryApexStatus(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) giMIB(1166) giproducts(1) apex(31) apexChassisRedundancy(22) apexChassisRedundancyStatus(2) apexChassisRedundancyStatusGeneral(1) apexChassisRedundancySecondaryApexStatus(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) gi(1166) giproducts(1) apex(31) apexChassisRedundancy(22) apexChassisRedundancyStatus(2) apexChassisRedundancyStatusGeneral(1) apexChassisRedundancySecondaryApexStatus(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) giMIB(1166) giproducts(1) apex(31) apexChassisRedundancy(22) apexChassisRedundancyStatus(2) apexChassisRedundancyStatusGeneral(1) apexChassisRedundancySecondaryApexStatus(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) gi(1166) giproducts(1) apex(31) apexChassisRedundancy(22) apexChassisRedundancyStatus(2) apexChassisRedundancyStatusGeneral(1) apexChassisRedundancySecondaryApexStatus(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) giMIB(1166) giproducts(1) apex(31) apexChassisRedundancy(22) apexChassisRedundancyStatus(2) apexChassisRedundancyStatusGeneral(1) apexChassisRedundancySecondaryApexStatus(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) gi(1166) giproducts(1) apex(31) apexChassisRedundancy(22) apexChassisRedundancyStatus(2) apexChassisRedundancyStatusGeneral(1) apexChassisRedundancySecondaryApexStatus(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) giMIB(1166) giproducts(1) apex(31) apexChassisRedundancy(22) apexChassisRedundancyStatus(2) apexChassisRedundancyStatusGeneral(1) apexChassisRedundancySecondaryApexStatus(2)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/1166/1/31/22/2/1/2
  • /ISO/Identified-Organization/6/1/4/1/1166/1/31/22/2/1/2
  • /ISO/3/6/1/4/1/1166/1/31/22/2/1/2
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/1166/giproducts/apex/apexChassisRedundancy/apexChassisRedundancyStatus/apexChassisRedundancyStatusGeneral/apexChassisRedundancySecondaryApexStatus
  • /iso/identified-organization/dod/internet/private/enterprise/gi/giproducts/apex/apexChassisRedundancy/apexChassisRedundancyStatus/apexChassisRedundancyStatusGeneral/apexChassisRedundancySecondaryApexStatus
  • /iso/identified-organization/dod/internet/private/enterprise/giMIB/giproducts/apex/apexChassisRedundancy/apexChassisRedundancyStatus/apexChassisRedundancyStatusGeneral/apexChassisRedundancySecondaryApexStatus
  • /iso/identified-organization/dod/internet/private/enterprises/1166/giproducts/apex/apexChassisRedundancy/apexChassisRedundancyStatus/apexChassisRedundancyStatusGeneral/apexChassisRedundancySecondaryApexStatus
  • /iso/identified-organization/dod/internet/private/enterprises/gi/giproducts/apex/apexChassisRedundancy/apexChassisRedundancyStatus/apexChassisRedundancyStatusGeneral/apexChassisRedundancySecondaryApexStatus
  • /iso/identified-organization/dod/internet/private/enterprises/giMIB/giproducts/apex/apexChassisRedundancy/apexChassisRedundancyStatus/apexChassisRedundancyStatusGeneral/apexChassisRedundancySecondaryApexStatus
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/1166/giproducts/apex/apexChassisRedundancy/apexChassisRedundancyStatus/apexChassisRedundancyStatusGeneral/apexChassisRedundancySecondaryApexStatus
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/gi/giproducts/apex/apexChassisRedundancy/apexChassisRedundancyStatus/apexChassisRedundancyStatusGeneral/apexChassisRedundancySecondaryApexStatus
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/giMIB/giproducts/apex/apexChassisRedundancy/apexChassisRedundancyStatus/apexChassisRedundancyStatusGeneral/apexChassisRedundancySecondaryApexStatus
  • /iso/identified-organization/dod/internet/private/vendor-objects/1166/giproducts/apex/apexChassisRedundancy/apexChassisRedundancyStatus/apexChassisRedundancyStatusGeneral/apexChassisRedundancySecondaryApexStatus
  • /iso/identified-organization/dod/internet/private/vendor-objects/gi/giproducts/apex/apexChassisRedundancy/apexChassisRedundancyStatus/apexChassisRedundancyStatusGeneral/apexChassisRedundancySecondaryApexStatus
  • /iso/identified-organization/dod/internet/private/vendor-objects/giMIB/giproducts/apex/apexChassisRedundancy/apexChassisRedundancyStatus/apexChassisRedundancyStatusGeneral/apexChassisRedundancySecondaryApexStatus
  • /iso/org/dod/internet/private/enterprise/1166/giproducts/apex/apexChassisRedundancy/apexChassisRedundancyStatus/apexChassisRedundancyStatusGeneral/apexChassisRedundancySecondaryApexStatus
  • /iso/org/dod/internet/private/enterprise/gi/giproducts/apex/apexChassisRedundancy/apexChassisRedundancyStatus/apexChassisRedundancyStatusGeneral/apexChassisRedundancySecondaryApexStatus
  • /iso/org/dod/internet/private/enterprise/giMIB/giproducts/apex/apexChassisRedundancy/apexChassisRedundancyStatus/apexChassisRedundancyStatusGeneral/apexChassisRedundancySecondaryApexStatus
  • /iso/org/dod/internet/private/enterprises/1166/giproducts/apex/apexChassisRedundancy/apexChassisRedundancyStatus/apexChassisRedundancyStatusGeneral/apexChassisRedundancySecondaryApexStatus
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-only
Status in MIB
current

Enumerated values

ValueName
0unknown
1active
2standby
3fault
4suspend

Using this OID with SNMP

At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.

snmpget [connection options] DEVICE .1.3.6.1.4.1.1166.1.31.22.2.1.2.0

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

apexChassisRedundancySecondaryApexStatus OBJECT-TYPE
    SYNTAX INTEGER
        {
         unknown (0),
         active  (1),
         standby (2),
         fault   (3),
         suspend (4)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "This parameter is applicable for an APEX where chassis redundancy is
         enabled.

         The APEX configured as primary will report the following values:
         These are based on its knowledge about the secondary APEX from heartbeat
         messages.

         unknown(0): State of secondary is not known (heartbeat not received).
         active(1):  Secondary RF outputs are active.
         standby(2): Secondary RF outputs are muted. Waiting to become active.
         fault(3):   Secondary has experienced a fault.
         suspend(4): Secondary is suspended.

         The APEX configured as secondary will report the following values:

         active(1):  Secondary RF outputs are active.
         standby(2): Secondary RF outputs are muted. Waiting to become active.
         fault(3):   Secondary has experienced a fault.
         suspend(4): Secondary is suspended.
        "
::= { apexChassisRedundancyStatusGeneral 2 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

This parameter is applicable for an APEX where chassis redundancy is enabled. The APEX configured as primary will report the following values: These are based on its knowledge about the secondary APEX from heartbeat messages. unknown(0): State of secondary is not known (heartbeat not received). active(1): Secondary RF outputs are active. standby(2): Secondary RF outputs are muted. Waiting to become active. fault(3): Secondary has experienced a fault. suspend(4): Secondary is suspended. The APEX configured as secondary will report the following values: active(1): Secondary RF outputs are active. standby(2): Secondary RF outputs are muted. Waiting to become active. fault(3): Secondary has experienced a fault. suspend(4): Secondary is suspended.

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 1

apexChassisRedundancySecondaryApexStatus · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: apexChassisRedundancySecondaryApexStatus

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "apexChassisRedundancySecondaryApexStatus",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "unknown",
    "(",
    "0",
    ")",
    ",",
    "active",
    "(",
    "1",
    ")",
    ",",
    "standby",
    "(",
    "2",
    ")",
    ",",
    "fault",
    "(",
    "3",
    ")",
    ",",
    "suspend",
    "(",
    "4",
    ")",
    "}",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This parameter is applicable for an APEX where chassis redundancy is enabled. The APEX configured as primary will report the following values: These are based on its knowledge about the secondary APEX from heartbeat messages. unknown(0): State of secondary is not known (heartbeat not received). active(1): Secondary RF outputs are active. standby(2): Secondary RF outputs are muted. Waiting to become active. fault(3): Secondary has experienced a fault. suspend(4): Secondary is suspended. The APEX configured as secondary will report the following values: active(1): Secondary RF outputs are active. standby(2): Secondary RF outputs are muted. Waiting to become active. fault(3): Secondary has experienced a fault. suspend(4): Secondary is suspended. \"",
    "::=",
    "{",
    "apexChassisRedundancyStatusGeneral",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "unknown",
            0
          ],
          [
            "active",
            1
          ],
          [
            "standby",
            2
          ],
          [
            "fault",
            3
          ],
          [
            "suspend",
            4
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This parameter is applicable for an APEX where chassis redundancy is enabled. The APEX configured as primary will report the following values: These are based on its knowledge about the secondary APEX from heartbeat messages. unknown(0): State of secondary is not known (heartbeat not received). active(1): Secondary RF outputs are active. standby(2): Secondary RF outputs are muted. Waiting to become active. fault(3): Secondary has experienced a fault. suspend(4): Secondary is suspended. The APEX configured as secondary will report the following values: active(1): Secondary RF outputs are active. standby(2): Secondary RF outputs are muted. Waiting to become active. fault(3): Secondary has experienced a fault. suspend(4): Secondary is suspended."
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.1166)

Fred Gotwald

Siblings (14)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.1166.1.31.22.2.1.1 apexChassisRedundancyPrimaryApexStatus00
1.3.6.1.4.1.1166.1.31.22.2.1.3 apexChassisRedundancyState00
1.3.6.1.4.1.1166.1.31.22.2.1.4 apexChassisRedundancyCommunicationStatus00
1.3.6.1.4.1.1166.1.31.22.2.1.5 apexChassisRedundancyConfigurationStatus00
1.3.6.1.4.1.1166.1.31.22.2.1.6 apexChassisRedundancyStatusInvalidApplyText00
1.3.6.1.4.1.1166.1.31.22.2.1.7 apexChassisRedundancyGeneralConfigSyncStatusText00
1.3.6.1.4.1.1166.1.31.22.2.1.8 apexChassisRedundancyGigEMismatchStatus00
1.3.6.1.4.1.1166.1.31.22.2.1.9 apexChassisRedundancyQamMismatchStatus00
1.3.6.1.4.1.1166.1.31.22.2.1.10 apexChassisRedundancyFirmwareMismatchStatus00
1.3.6.1.4.1.1166.1.31.22.2.1.11 apexChassisRedundancyGigE12LinkStatus00
1.3.6.1.4.1.1166.1.31.22.2.1.12 apexChassisRedundancyGigE34LinkStatus00
1.3.6.1.4.1.1166.1.31.22.2.1.13 apexChassisRedundancyCurrHBIntfIPStatus00
1.3.6.1.4.1.1166.1.31.22.2.1.14 apexChassisRedundancyAppliedEncAlgorithmStatus00
1.3.6.1.4.1.1166.1.31.22.2.1.15 apexChassisRedundancyMCSimEntitlementStatus00