Status in source: current.
Names: apexQamRfConfigSymbolRate
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"apexQamRfConfigSymbolRate",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"800000",
".",
".",
"6980000",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The Symbol Rate Setting of the QAM Channels enabled on the RF Port. It is in symbols per second (sps). When QAM Transmission Mode is 'annexA-DVB' the range is 800,000 sps to 6,980,000 sps in 1000 sps steps. When QAM Transmission Mode is 'annexC-Asia-Pacific' the range is 800,000 sps to 5,310,000 sps in 1000 sps steps. The APEX will correct values not on a 1000 sps boundary so the user or management system does not need to enforce the step size. When QAM Transmission Mode is 'annexB-ATSC-DCII' this parameter is not configurable and is set by the APEX based on QAM Modulation Mode. For 4x4 QAM Modules: This parameter applies on an RF pair basis, 1-2 and 7-8. APEX1000 will use only odd table indices. Even index of pair will be ignored and set to value for odd index of pair. @Range(step=1000) \"",
"::=",
"{",
"apexQamRfConfigEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
800000,
6980000
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The Symbol Rate Setting of the QAM Channels enabled on the RF Port. It is in symbols per second (sps). When QAM Transmission Mode is 'annexA-DVB' the range is 800,000 sps to 6,980,000 sps in 1000 sps steps. When QAM Transmission Mode is 'annexC-Asia-Pacific' the range is 800,000 sps to 5,310,000 sps in 1000 sps steps. The APEX will correct values not on a 1000 sps boundary so the user or management system does not need to enforce the step size. When QAM Transmission Mode is 'annexB-ATSC-DCII' this parameter is not configurable and is set by the APEX based on QAM Modulation Mode. For 4x4 QAM Modules: This parameter applies on an RF pair basis, 1-2 and 7-8. APEX1000 will use only odd table indices. Even index of pair will be ignored and set to value for odd index of pair. @Range(step=1000)"
],
null,
null,
null,
null
]
}