Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"apexQamRfRedundStatusMismatch",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"notApplicable",
"(",
"0",
")",
",",
"noMismatch",
"(",
"1",
")",
",",
"backup2x4",
"(",
"2",
")",
",",
"primary2x4",
"(",
"3",
")",
",",
"any4x4",
"(",
"4",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Indicates whether there is a potential for channels being lost when failing to the backup or when switching back to a primary due to a mixture of 2x4 and 2x8 QAM Modules. Indicates whether RF redundancy is unavailable due to a 4x4 QAM Module installed. A 2x4 QAM Module is capable of supporting a maximum of 4 channels per RF port. A 2x8 QAM Module is capable of supporting a maximum of 8 channels per RF port. The number of channels enabled (apexQamRfConfigNumChannelsEnabled) is not considered. 'notApplicable' - QAM RF Redundancy is disabled. 'noMismatch' - Indicates no channels would be lost because there is no mismatch. 'backup2x4' - Indicates a loss of channels could occur on failover to the backup because the backup RF Port is in a 2x4 module and at least one primary RF Port is in a 2x8 module. 'primary2x4' - Indicates a loss of channels could occur on switch- back from the backup to the primary because the backup RF Port is in a 2x8 module and the primary RF Port is in a 2x4 module. This would occur if the failed 2x8 primary is replaced with a 2x4. 'any4x4' - Indicates a 4x4 QAM Module is installed in any slot and RF Redundancy is not available. Failover and/or switchback are suspended until the 4x4 is replaced. \"",
"::=",
"{",
"apexQamRfRedundancyStatusGeneral",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"notApplicable",
0
],
[
"noMismatch",
1
],
[
"backup2x4",
2
],
[
"primary2x4",
3
],
[
"any4x4",
4
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Indicates whether there is a potential for channels being lost when failing to the backup or when switching back to a primary due to a mixture of 2x4 and 2x8 QAM Modules. Indicates whether RF redundancy is unavailable due to a 4x4 QAM Module installed. A 2x4 QAM Module is capable of supporting a maximum of 4 channels per RF port. A 2x8 QAM Module is capable of supporting a maximum of 8 channels per RF port. The number of channels enabled (apexQamRfConfigNumChannelsEnabled) is not considered. 'notApplicable' - QAM RF Redundancy is disabled. 'noMismatch' - Indicates no channels would be lost because there is no mismatch. 'backup2x4' - Indicates a loss of channels could occur on failover to the backup because the backup RF Port is in a 2x4 module and at least one primary RF Port is in a 2x8 module. 'primary2x4' - Indicates a loss of channels could occur on switch- back from the backup to the primary because the backup RF Port is in a 2x8 module and the primary RF Port is in a 2x4 module. This would occur if the failed 2x8 primary is replaced with a 2x4. 'any4x4' - Indicates a 4x4 QAM Module is installed in any slot and RF Redundancy is not available. Failover and/or switchback are suspended until the 4x4 is replaced."
],
null,
null,
null,
null
]
}