OID reference

apexSesContConfRedundThreshold

1.3.6.1.4.1.1166.1.31.9.1.1.4

Description

This object is obsolete. Session Control Redundancy Threshold. This is the percent used to determine Fail Over from Primary to Secondary, and Switch Back from Secondary to Primary. If a value of zero is specified, Fail Over or Switch Back will not occur. Range is 0 to 100%. Primary Fail Over to Secondary: FailOver = (…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.1166.1.31.9.1.1 (apexSessionControlConfigGeneral)
Node code
4
Node name
apexSesContConfRedundThreshold
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.1166.1.31.9.1.1.4
URN notation
urn:oid:1.3.6.1.4.1.1166.1.31.9.1.1.4
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 1166 1 31 9 1 1 4}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) gi(1166) giproducts(1) apex(31) apexSessionControl(9) apexSessionControlConfig(1) apexSessionControlConfigGeneral(1) apexSesContConfRedundThreshold(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) giMIB(1166) giproducts(1) apex(31) apexSessionControl(9) apexSessionControlConfig(1) apexSessionControlConfigGeneral(1) apexSesContConfRedundThreshold(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) gi(1166) giproducts(1) apex(31) apexSessionControl(9) apexSessionControlConfig(1) apexSessionControlConfigGeneral(1) apexSesContConfRedundThreshold(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) giMIB(1166) giproducts(1) apex(31) apexSessionControl(9) apexSessionControlConfig(1) apexSessionControlConfigGeneral(1) apexSesContConfRedundThreshold(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) gi(1166) giproducts(1) apex(31) apexSessionControl(9) apexSessionControlConfig(1) apexSessionControlConfigGeneral(1) apexSesContConfRedundThreshold(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) giMIB(1166) giproducts(1) apex(31) apexSessionControl(9) apexSessionControlConfig(1) apexSessionControlConfigGeneral(1) apexSesContConfRedundThreshold(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) gi(1166) giproducts(1) apex(31) apexSessionControl(9) apexSessionControlConfig(1) apexSessionControlConfigGeneral(1) apexSesContConfRedundThreshold(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) giMIB(1166) giproducts(1) apex(31) apexSessionControl(9) apexSessionControlConfig(1) apexSessionControlConfigGeneral(1) apexSesContConfRedundThreshold(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) gi(1166) giproducts(1) apex(31) apexSessionControl(9) apexSessionControlConfig(1) apexSessionControlConfigGeneral(1) apexSesContConfRedundThreshold(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) giMIB(1166) giproducts(1) apex(31) apexSessionControl(9) apexSessionControlConfig(1) apexSessionControlConfigGeneral(1) apexSesContConfRedundThreshold(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) gi(1166) giproducts(1) apex(31) apexSessionControl(9) apexSessionControlConfig(1) apexSessionControlConfigGeneral(1) apexSesContConfRedundThreshold(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) giMIB(1166) giproducts(1) apex(31) apexSessionControl(9) apexSessionControlConfig(1) apexSessionControlConfigGeneral(1) apexSesContConfRedundThreshold(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) gi(1166) giproducts(1) apex(31) apexSessionControl(9) apexSessionControlConfig(1) apexSessionControlConfigGeneral(1) apexSesContConfRedundThreshold(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) giMIB(1166) giproducts(1) apex(31) apexSessionControl(9) apexSessionControlConfig(1) apexSessionControlConfigGeneral(1) apexSesContConfRedundThreshold(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) gi(1166) giproducts(1) apex(31) apexSessionControl(9) apexSessionControlConfig(1) apexSessionControlConfigGeneral(1) apexSesContConfRedundThreshold(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) giMIB(1166) giproducts(1) apex(31) apexSessionControl(9) apexSessionControlConfig(1) apexSessionControlConfigGeneral(1) apexSesContConfRedundThreshold(4)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/1166/1/31/9/1/1/4
  • /ISO/Identified-Organization/6/1/4/1/1166/1/31/9/1/1/4
  • /ISO/3/6/1/4/1/1166/1/31/9/1/1/4
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/1166/giproducts/apex/apexSessionControl/apexSessionControlConfig/apexSessionControlConfigGeneral/apexSesContConfRedundThreshold
  • /iso/identified-organization/dod/internet/private/enterprise/gi/giproducts/apex/apexSessionControl/apexSessionControlConfig/apexSessionControlConfigGeneral/apexSesContConfRedundThreshold
  • /iso/identified-organization/dod/internet/private/enterprise/giMIB/giproducts/apex/apexSessionControl/apexSessionControlConfig/apexSessionControlConfigGeneral/apexSesContConfRedundThreshold
  • /iso/identified-organization/dod/internet/private/enterprises/1166/giproducts/apex/apexSessionControl/apexSessionControlConfig/apexSessionControlConfigGeneral/apexSesContConfRedundThreshold
  • /iso/identified-organization/dod/internet/private/enterprises/gi/giproducts/apex/apexSessionControl/apexSessionControlConfig/apexSessionControlConfigGeneral/apexSesContConfRedundThreshold
  • /iso/identified-organization/dod/internet/private/enterprises/giMIB/giproducts/apex/apexSessionControl/apexSessionControlConfig/apexSessionControlConfigGeneral/apexSesContConfRedundThreshold
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/1166/giproducts/apex/apexSessionControl/apexSessionControlConfig/apexSessionControlConfigGeneral/apexSesContConfRedundThreshold
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/gi/giproducts/apex/apexSessionControl/apexSessionControlConfig/apexSessionControlConfigGeneral/apexSesContConfRedundThreshold
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/giMIB/giproducts/apex/apexSessionControl/apexSessionControlConfig/apexSessionControlConfigGeneral/apexSesContConfRedundThreshold
  • /iso/identified-organization/dod/internet/private/vendor-objects/1166/giproducts/apex/apexSessionControl/apexSessionControlConfig/apexSessionControlConfigGeneral/apexSesContConfRedundThreshold
  • /iso/identified-organization/dod/internet/private/vendor-objects/gi/giproducts/apex/apexSessionControl/apexSessionControlConfig/apexSessionControlConfigGeneral/apexSesContConfRedundThreshold
  • /iso/identified-organization/dod/internet/private/vendor-objects/giMIB/giproducts/apex/apexSessionControl/apexSessionControlConfig/apexSessionControlConfigGeneral/apexSesContConfRedundThreshold
  • /iso/org/dod/internet/private/enterprise/1166/giproducts/apex/apexSessionControl/apexSessionControlConfig/apexSessionControlConfigGeneral/apexSesContConfRedundThreshold
  • /iso/org/dod/internet/private/enterprise/gi/giproducts/apex/apexSessionControl/apexSessionControlConfig/apexSessionControlConfigGeneral/apexSesContConfRedundThreshold
  • /iso/org/dod/internet/private/enterprise/giMIB/giproducts/apex/apexSessionControl/apexSessionControlConfig/apexSessionControlConfigGeneral/apexSesContConfRedundThreshold
  • /iso/org/dod/internet/private/enterprises/1166/giproducts/apex/apexSessionControl/apexSessionControlConfig/apexSessionControlConfigGeneral/apexSesContConfRedundThreshold
  • Additional combinations skipped.

SNMP properties

Value type
Integer32
Maximum access defined by MIB
read-write
Status in MIB
obsolete
Allowed ranges
0–100

Using this OID with SNMP

At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.

snmpget [connection options] DEVICE .1.3.6.1.4.1.1166.1.31.9.1.1.4.0

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

apexSesContConfRedundThreshold OBJECT-TYPE
    SYNTAX Integer32(0..100)
    MAX-ACCESS read-write
    STATUS obsolete
    DESCRIPTION
        "This object is obsolete.

         Session Control Redundancy Threshold.

         This is the percent used to determine Fail Over from Primary
         to Secondary, and Switch Back from Secondary to Primary.  If
         a value of zero is specified, Fail Over or Switch Back will
         not occur.  Range is 0 to 100%.

         Primary Fail Over to Secondary:
         FailOver = (PrimaryRate) < (Threshold * SecondaryRate)
         The Primary must remain below the threshold for
         apexGbeConfInRedundMonitorPeriod.

         Secondary Switch Back to Primary:
         SwitchBack = (PrimaryRate) >= (Threshold * SecondaryRate)
         The Primary must remain at or above the threshold for
         apexGbeConfInRedundMonitorPeriod seconds.  The APEX will delay
         Switch Back an additional apexGbeConfInRedundSwitchTime
         seconds.  Switch Back will not occur when
         apexGbeConfInRedundAutoSwitchBack is 'disabled'.

         Once written, the change to this parameter will take immediate effect.
         However, in order for the change to persist through subsequent reboots
         or power cycles, the change must be saved via the apexSaveConfig parameter.


         @Config(config=yes, reboot=no)
         @Save(apexSaveConfig, value=2)
         @File(sdv.ini, type='ini')
        "
::= { apexSessionControlConfigGeneral 4 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

This object is obsolete. Session Control Redundancy Threshold. This is the percent used to determine Fail Over from Primary to Secondary, and Switch Back from Secondary to Primary. If a value of zero is specified, Fail Over or Switch Back will not occur. Range is 0 to 100%. Primary Fail Over to Secondary: FailOver = (PrimaryRate) < (Threshold * SecondaryRate) The Primary must remain below the threshold for apexGbeConfInRedundMonitorPeriod. Secondary Switch Back to Primary: SwitchBack = (PrimaryRate) >= (Threshold * SecondaryRate) The Primary must remain at or above the threshold for apexGbeConfInRedundMonitorPeriod seconds. The APEX will delay Switch Back an additional apexGbeConfInRedundSwitchTime seconds. Switch Back will not occur when apexGbeConfInRedundAutoSwitchBack is 'disabled'. Once written, the change to this parameter will take immediate effect. However, in order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter. @Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(sdv.ini, type='ini')

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 1

apexSesContConfRedundThreshold · obsoleteMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 source

Status in source: obsolete.

Names: apexSesContConfRedundThreshold

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "apexSesContConfRedundThreshold",
    "OBJECT-TYPE",
    "SYNTAX",
    "Integer32",
    "(",
    "0",
    ".",
    ".",
    "100",
    ")",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "obsolete",
    "DESCRIPTION",
    "\"This object is obsolete. Session Control Redundancy Threshold. This is the percent used to determine Fail Over from Primary to Secondary, and Switch Back from Secondary to Primary. If a value of zero is specified, Fail Over or Switch Back will not occur. Range is 0 to 100%. Primary Fail Over to Secondary: FailOver = (PrimaryRate) < (Threshold * SecondaryRate) The Primary must remain below the threshold for apexGbeConfInRedundMonitorPeriod. Secondary Switch Back to Primary: SwitchBack = (PrimaryRate) >= (Threshold * SecondaryRate) The Primary must remain at or above the threshold for apexGbeConfInRedundMonitorPeriod seconds. The APEX will delay Switch Back an additional apexGbeConfInRedundSwitchTime seconds. Switch Back will not occur when apexGbeConfInRedundAutoSwitchBack is 'disabled'. Once written, the change to this parameter will take immediate effect. However, in order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter. @Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(sdv.ini, type='ini') \"",
    "::=",
    "{",
    "apexSessionControlConfigGeneral",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "Integer32",
      [
        "integerSubType",
        [
          [
            0,
            100
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "obsolete"
    ],
    [
      "DESCRIPTION",
      "This object is obsolete. Session Control Redundancy Threshold. This is the percent used to determine Fail Over from Primary to Secondary, and Switch Back from Secondary to Primary. If a value of zero is specified, Fail Over or Switch Back will not occur. Range is 0 to 100%. Primary Fail Over to Secondary: FailOver = (PrimaryRate) < (Threshold * SecondaryRate) The Primary must remain below the threshold for apexGbeConfInRedundMonitorPeriod. Secondary Switch Back to Primary: SwitchBack = (PrimaryRate) >= (Threshold * SecondaryRate) The Primary must remain at or above the threshold for apexGbeConfInRedundMonitorPeriod seconds. The APEX will delay Switch Back an additional apexGbeConfInRedundSwitchTime seconds. Switch Back will not occur when apexGbeConfInRedundAutoSwitchBack is 'disabled'. Once written, the change to this parameter will take immediate effect. However, in order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter. @Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(sdv.ini, type='ini')"
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.1166)

Fred Gotwald

Siblings (6)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.1166.1.31.9.1.1.1 apexSesContConfProtocol00
1.3.6.1.4.1.1166.1.31.9.1.1.2 apexSesContConfTableApplyChange00
1.3.6.1.4.1.1166.1.31.9.1.1.3 apexSesContConfRateCompareType00
1.3.6.1.4.1.1166.1.31.9.1.1.5 apexSesContConfInputPreEncryptCheck00
1.3.6.1.4.1.1166.1.31.9.1.1.6 apexSesContConfRedundType00
1.3.6.1.4.1.1166.1.31.9.1.1.7 apexSesContConfFollowDtcp00