Description 1
Select Enable/Disable IGMP Snooping for the desired vlan. 0. Disable 1. Enable
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.11863.6.25.1.1.3.1.1.2
Select Enable/Disable IGMP Snooping for the desired vlan. 0. Disable 1. Enable
Identification
{1 3 6 1 4 1 11863 6 25 1 1 3 1 1 2}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it. Notes below names come from selected MIB definitions.
| Value | Name and source notes | Source variants |
|---|---|---|
| 0 | disable Disable | 1 |
| 1 | enable Enable | 1 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In TPLINK-IGMPSNOOPING-MIB, the row index tpIgmpVlanId is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.11863.6.25.1.1.3.1.1.2.<tpIgmpVlanId>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11863.6.25.1.1.3.1.1.2
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
tpIgmpVlanEnable OBJECT-TYPE
SYNTAX INTEGER{
disable(0), --Disable
enable(1) --Enable
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select Enable/Disable IGMP Snooping for the desired vlan.
0. Disable
1. Enable"
::= { tpIgmpVlanEntry 2 }tpIgmpRouterTime OBJECT-TYPE
SYNTAX INTEGER(60..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify the aging time of the router port. Within this time,
if the switch don't receive IGMP query message from the router port,
it will consider this port is not a router port any more,0,60-600 second."
::= { tpIgmpVlanEntry 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Select Enable/Disable IGMP Snooping for the desired vlan. 0. Disable 1. Enable
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
Specify the aging time of the router port. Within this time, if the switch don't receive IGMP query message from the router port, it will consider this port is not a router port any more,0,60-600 second.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: tpIgmpVlanEnable
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tpIgmpVlanEnable",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"disable",
"(",
"0",
")",
",",
"enable",
"(",
"1",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Select Enable/Disable IGMP Snooping for the desired vlan. 0. Disable 1. Enable\"",
"::=",
"{",
"tpIgmpVlanEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"disable",
0
],
[
"enable",
1
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Select Enable/Disable IGMP Snooping for the desired vlan. 0. Disable 1. Enable"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: TPLINK-IGMPSNOOPING-MIB
See published definition above
{'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'IpAddress'], 'TPLINK-MIB': ['tplinkMgmt'], 'RFC1213-MIB': ['ifIndex'], 'TPLINK-TC-MIB': ['TPRowStatus']}Related source files and packages:
Status in source: current.
Names: tpIgmpRouterTime
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tpIgmpRouterTime",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"60",
".",
".",
"600",
")",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Specify the aging time of the router port. Within this time, if the switch don't receive IGMP query message from the router port, it will consider this port is not a router port any more,0,60-600 second.\"",
"::=",
"{",
"tpIgmpVlanEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
60,
600
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specify the aging time of the router port. Within this time, if the switch don't receive IGMP query message from the router port, it will consider this port is not a router port any more,0,60-600 second."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Netdisco archive.
Module: TPLINK-IGMPSNOOPING-MIB
See published definition above
{'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'IpAddress'], 'TPLINK-MIB': ['tplinkMgmt'], 'RFC1213-MIB': ['ifIndex'], 'TPLINK-TC-MIB': ['TPRowStatus']}Related source files and packages:
Registration