Description 1
VLAN ID, 0-4094, value '0' means that the vid field is disabled.
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.11863.6.26.1.1.3.1.10
VLAN ID, 0-4094, value '0' means that the vid field is disabled.
Identification
{1 3 6 1 4 1 11863 6 26 1 1 3 1 10}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In TPLINK-ACL-RULE-MIB, the row index consists of these components in order:
tpCombAclId (INTEGER): one numeric subidentifier for the non-negative value.tpCombRuleId (INTEGER): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.11863.6.26.1.1.3.1.10.<tpCombAclId>.<tpCombRuleId>. Use values present on the device and permitted by its MIB. Other definitions can differ.
Published row index variants: tpCombAclId, tpCombRuleId; tpExtipAclId, tpExtipRuleId.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11863.6.26.1.1.3.1.10
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
tpCombVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VLAN ID, 0-4094, value '0' means that the vid field is disabled."
::= {tpCombRuleEntry 10}tpExtipTcpFlag OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Extended IP TCP flag, this field is described as a bit-map structure:
There are 12 bits of this field, the higher 6 bits show us whether these TCP flags are enabled(1) or disabled(0).
The lower 6 bits show us the 6 kind of TCP flags' value (0-1).
From the highest bit(bit11) to the lowest bit(0), each bit stands for a TCP flag:
bit11 & bit5 -- URG flag bit10 & bit4 -- ACK flag
bit9 & bit3 -- PSH flag bit8 & bit2 -- RST flag
bit7 & bit1 -- SYN flag bit6 & bit0 -- FIN flag"
::= {tpExtipRuleEntry 10}
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
VLAN ID, 0-4094, value '0' means that the vid field is disabled.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
Extended IP TCP flag, this field is described as a bit-map structure: There are 12 bits of this field, the higher 6 bits show us whether these TCP flags are enabled(1) or disabled(0). The lower 6 bits show us the 6 kind of TCP flags' value (0-1). From the highest bit(bit11) to the lowest bit(0), each bit stands for a TCP flag: bit11 & bit5 -- URG flag bit10 & bit4 -- ACK flag bit9 & bit3 -- PSH flag bit8 & bit2 -- RST flag bit7 & bit1 -- SYN flag bit6 & bit0 -- FIN flag
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: tpCombVlanId
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tpCombVlanId",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"VLAN ID, 0-4094, value '0' means that the vid field is disabled.\"",
"::=",
"{",
"tpCombRuleEntry",
"10",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"VLAN ID, 0-4094, value '0' means that the vid field is disabled."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: TPLINK-ACL-RULE-MIB
See published definition above
{'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'IpAddress', 'NOTIFICATION-TYPE'], 'TPLINK-MIB': ['tplinkMgmt'], 'TPLINK-TC-MIB': ['TPRowStatus'], 'TPLINK-ACL-MIB': ['tplinkAclMIBObjects']}Related source files and packages:
Status in source: current.
Names: tpExtipTcpFlag
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tpExtipTcpFlag",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Extended IP TCP flag, this field is described as a bit-map structure: There are 12 bits of this field, the higher 6 bits show us whether these TCP flags are enabled(1) or disabled(0). The lower 6 bits show us the 6 kind of TCP flags' value (0-1). From the highest bit(bit11) to the lowest bit(0), each bit stands for a TCP flag: bit11 & bit5 -- URG flag bit10 & bit4 -- ACK flag bit9 & bit3 -- PSH flag bit8 & bit2 -- RST flag bit7 & bit1 -- SYN flag bit6 & bit0 -- FIN flag\"",
"::=",
"{",
"tpExtipRuleEntry",
"10",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Extended IP TCP flag, this field is described as a bit-map structure: There are 12 bits of this field, the higher 6 bits show us whether these TCP flags are enabled(1) or disabled(0). The lower 6 bits show us the 6 kind of TCP flags' value (0-1). From the highest bit(bit11) to the lowest bit(0), each bit stands for a TCP flag: bit11 & bit5 -- URG flag bit10 & bit4 -- ACK flag bit9 & bit3 -- PSH flag bit8 & bit2 -- RST flag bit7 & bit1 -- SYN flag bit6 & bit0 -- FIN flag"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Netdisco archive.
Module: TPLINK-ACL-RULE-MIB
See published definition above
{'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'IpAddress'], 'TPLINK-MIB': ['tplinkMgmt'], 'TPLINK-TC-MIB': ['TPRowStatus'], 'TPLINK-ACL-MIB': ['tplinkAclMIBObjects']}Related source files and packages:
Registration