Description 1
Specify the aging time of the member port. Within this time, if the switch don't receive MLD report message from the member port, it will consider this port is not a member port any more,0,60-600 second.
OID reference
1.3.6.1.4.1.11863.6.43.1.1.3.1.1.3
Specify the aging time of the member port. Within this time, if the switch don't receive MLD report message from the member port, it will consider this port is not a member port any more,0,60-600 second.
Identification
{1 3 6 1 4 1 11863 6 43 1 1 3 1 1 3}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it. Notes below names come from selected MIB definitions.
| Value | Name and source notes | Source variants |
|---|---|---|
| 0 | disable Disable | 2 |
| 1 | enable Enable | 2 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In TPLINK-MLDSNOOPING-MIB, the row index tpMldVlanId is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.11863.6.43.1.1.3.1.1.3.<tpMldVlanId>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11863.6.43.1.1.3.1.1.3
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
tpMldMemberTime OBJECT-TYPE
SYNTAX INTEGER(60..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify the aging time of the member port. Within this time,
if the switch don't receive MLD report message from the member port,
it will consider this port is not a member port any more,0,60-600 second."
::= { tpMldVlanEntry 3}tpMldVlanFastLeave OBJECT-TYPE
SYNTAX INTEGER{
disable(0), --Disable
enable(1) --Enable
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select Enable/Disable Fast Leave feature for the desired vlan.
If Fast Leave is enabled for a vlan, the Switch will immediately
remove this port from the multicast group upon receiving MLD
leave messages.
0. Disable
1. Enable"
::= { tpMldVlanEntry 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Specify the aging time of the member port. Within this time, if the switch don't receive MLD report message from the member port, it will consider this port is not a member port any more,0,60-600 second.
Description 2
Select Enable/Disable Fast Leave feature for the desired vlan. If Fast Leave is enabled for a vlan, the Switch will immediately remove this port from the multicast group upon receiving MLD leave messages. 0. Disable 1. Enable
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: tpMldMemberTime
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tpMldMemberTime",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"60",
".",
".",
"600",
")",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Specify the aging time of the member port. Within this time, if the switch don't receive MLD report message from the member port, it will consider this port is not a member port any more,0,60-600 second.\"",
"::=",
"{",
"tpMldVlanEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
60,
600
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specify the aging time of the member port. Within this time, if the switch don't receive MLD report message from the member port, it will consider this port is not a member port any more,0,60-600 second."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Netdisco archive.
Module: TPLINK-MLDSNOOPING-MIB
See published definition above
{'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'IpAddress'], 'TPLINK-MIB': ['tplinkMgmt'], 'RFC1213-MIB': ['ifIndex'], 'TPLINK-TC-MIB': ['TPRowStatus']}Related source files and packages:
Status in source: current.
Names: tpMldVlanFastLeave
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tpMldVlanFastLeave",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"disable",
"(",
"0",
")",
",",
"enable",
"(",
"1",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Select Enable/Disable Fast Leave feature for the desired vlan. If Fast Leave is enabled for a vlan, the Switch will immediately remove this port from the multicast group upon receiving MLD leave messages. 0. Disable 1. Enable\"",
"::=",
"{",
"tpMldVlanEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"disable",
0
],
[
"enable",
1
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Select Enable/Disable Fast Leave feature for the desired vlan. If Fast Leave is enabled for a vlan, the Switch will immediately remove this port from the multicast group upon receiving MLD leave messages. 0. Disable 1. Enable"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: TPLINK-MLDSNOOPING-MIB
See published definition above
{'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'IpAddress'], 'TPLINK-MIB': ['tplinkMgmt'], 'RFC1213-MIB': ['ifIndex'], 'TPLINK-TC-MIB': ['TPRowStatus']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.1 | tpMldVlanId | 0 | 0 | |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.2 | tpMldVlanEnable, tpMldRouterTime | 0 | 0 | |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.4 | tpMldVlanReportSuppression, tpMldRouterPort | 0 | 0 | |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.5 | tpMldRouterTime, tpMldForbiddenRouterPort | 0 | 0 | |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.6 | tpMldMemberTime, tpMldVlanStatus | 0 | 0 | |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.7 | tpMldLeaveTime | 0 | 0 | |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.8 | tpMldRouterPort | 0 | 0 | |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.9 | tpMldForbiddenRouterPort | 0 | 0 | |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.10 | tpMldQueryEnable | 0 | 0 | |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.11 | tpMldQueryInterval | 0 | 0 | |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.12 | tpMldQueryMaxResponseTime | 0 | 0 | |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.13 | tpMldQueryGeneralSrcIp | 0 | 0 | |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.14 | tpMldQueryLastMemberCount | 0 | 0 | |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.15 | tpMldQueryLastMemberInterval | 0 | 0 | |
| 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.16 | tpMldVlanStatus | 0 | 0 |