OID reference

asEtherRingPortState

1.3.6.1.4.1.119.2.3.69.501.3.39.2.1.4

Description

Port Status. 'initBlocking' is the initial value. At this point the no R-APS frame is received. When the port is configured as RPL port and the port is closed, the value will show 'rplBlocking'. The port forwards the frames, the value will show 'forwarding'. If the signal failure is detected on the port and the port i…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.119.2.3.69.501.3.39.2.1 (asEtherRingPortEntry)
Node code
4
Node name
asEtherRingPortState
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.119.2.3.69.501.3.39.2.1.4
URN notation
urn:oid:1.3.6.1.4.1.119.2.3.69.501.3.39.2.1.4
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 119 2 3 69 501 3 39 2 1 4}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nec(119) nec-mib(2) necProductDepend(3) radioEquipment(69) pasoNeoIpe-common(501) alarmStatusGroup(3) asEtherRingGroup(39) asEtherRingPortTable(2) asEtherRingPortEntry(1) asEtherRingPortState(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) nec(119) nec-mib(2) necProductDepend(3) radioEquipment(69) pasoNeoIpe-common(501) alarmStatusGroup(3) asEtherRingGroup(39) asEtherRingPortTable(2) asEtherRingPortEntry(1) asEtherRingPortState(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nec(119) nec-mib(2) necProductDepend(3) radioEquipment(69) pasoNeoIpe-common(501) alarmStatusGroup(3) asEtherRingGroup(39) asEtherRingPortTable(2) asEtherRingPortEntry(1) asEtherRingPortState(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nec(119) nec-mib(2) necProductDepend(3) radioEquipment(69) pasoNeoIpe-common(501) alarmStatusGroup(3) asEtherRingGroup(39) asEtherRingPortTable(2) asEtherRingPortEntry(1) asEtherRingPortState(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) nec(119) nec-mib(2) necProductDepend(3) radioEquipment(69) pasoNeoIpe-common(501) alarmStatusGroup(3) asEtherRingGroup(39) asEtherRingPortTable(2) asEtherRingPortEntry(1) asEtherRingPortState(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) nec(119) nec-mib(2) necProductDepend(3) radioEquipment(69) pasoNeoIpe-common(501) alarmStatusGroup(3) asEtherRingGroup(39) asEtherRingPortTable(2) asEtherRingPortEntry(1) asEtherRingPortState(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) nec(119) nec-mib(2) necProductDepend(3) radioEquipment(69) pasoNeoIpe-common(501) alarmStatusGroup(3) asEtherRingGroup(39) asEtherRingPortTable(2) asEtherRingPortEntry(1) asEtherRingPortState(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) nec(119) nec-mib(2) necProductDepend(3) radioEquipment(69) pasoNeoIpe-common(501) alarmStatusGroup(3) asEtherRingGroup(39) asEtherRingPortTable(2) asEtherRingPortEntry(1) asEtherRingPortState(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nec(119) nec-mib(2) necProductDepend(3) radioEquipment(69) pasoNeoIpe-common(501) alarmStatusGroup(3) asEtherRingGroup(39) asEtherRingPortTable(2) asEtherRingPortEntry(1) asEtherRingPortState(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) nec(119) nec-mib(2) necProductDepend(3) radioEquipment(69) pasoNeoIpe-common(501) alarmStatusGroup(3) asEtherRingGroup(39) asEtherRingPortTable(2) asEtherRingPortEntry(1) asEtherRingPortState(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nec(119) nec-mib(2) necProductDepend(3) radioEquipment(69) pasoNeoIpe-common(501) alarmStatusGroup(3) asEtherRingGroup(39) asEtherRingPortTable(2) asEtherRingPortEntry(1) asEtherRingPortState(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nec(119) nec-mib(2) necProductDepend(3) radioEquipment(69) pasoNeoIpe-common(501) alarmStatusGroup(3) asEtherRingGroup(39) asEtherRingPortTable(2) asEtherRingPortEntry(1) asEtherRingPortState(4)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) nec(119) nec-mib(2) necProductDepend(3) radioEquipment(69) pasoNeoIpe-common(501) alarmStatusGroup(3) asEtherRingGroup(39) asEtherRingPortTable(2) asEtherRingPortEntry(1) asEtherRingPortState(4)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) nec(119) nec-mib(2) necProductDepend(3) radioEquipment(69) pasoNeoIpe-common(501) alarmStatusGroup(3) asEtherRingGroup(39) asEtherRingPortTable(2) asEtherRingPortEntry(1) asEtherRingPortState(4)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nec(119) nec-mib(2) necProductDepend(3) radioEquipment(69) pasoNeoIpe-common(501) alarmStatusGroup(3) asEtherRingGroup(39) asEtherRingPortTable(2) asEtherRingPortEntry(1) asEtherRingPortState(4)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nec(119) nec-mib(2) necProductDepend(3) radioEquipment(69) pasoNeoIpe-common(501) alarmStatusGroup(3) asEtherRingGroup(39) asEtherRingPortTable(2) asEtherRingPortEntry(1) asEtherRingPortState(4)}
OID-IRI notation
  • /1/3/6/1/4/1/119/2/3/69/501/3/39/2/1/4
  • /ISO/Identified-Organization/6/1/4/1/119/2/3/69/501/3/39/2/1/4
  • /ISO/3/6/1/4/1/119/2/3/69/501/3/39/2/1/4
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/nec/nec-mib/necProductDepend/radioEquipment/pasoNeoIpe-common/alarmStatusGroup/asEtherRingGroup/asEtherRingPortTable/asEtherRingPortEntry/asEtherRingPortState
  • /iso/identified-organization/dod/internet/private/enterprises/nec/nec-mib/necProductDepend/radioEquipment/pasoNeoIpe-common/alarmStatusGroup/asEtherRingGroup/asEtherRingPortTable/asEtherRingPortEntry/asEtherRingPortState
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/nec/nec-mib/necProductDepend/radioEquipment/pasoNeoIpe-common/alarmStatusGroup/asEtherRingGroup/asEtherRingPortTable/asEtherRingPortEntry/asEtherRingPortState
  • /iso/identified-organization/dod/internet/private/vendor-objects/nec/nec-mib/necProductDepend/radioEquipment/pasoNeoIpe-common/alarmStatusGroup/asEtherRingGroup/asEtherRingPortTable/asEtherRingPortEntry/asEtherRingPortState
  • /iso/org/dod/internet/private/enterprise/nec/nec-mib/necProductDepend/radioEquipment/pasoNeoIpe-common/alarmStatusGroup/asEtherRingGroup/asEtherRingPortTable/asEtherRingPortEntry/asEtherRingPortState
  • /iso/org/dod/internet/private/enterprises/nec/nec-mib/necProductDepend/radioEquipment/pasoNeoIpe-common/alarmStatusGroup/asEtherRingGroup/asEtherRingPortTable/asEtherRingPortEntry/asEtherRingPortState
  • /iso/org/dod/internet/private/ldap-enterprise/nec/nec-mib/necProductDepend/radioEquipment/pasoNeoIpe-common/alarmStatusGroup/asEtherRingGroup/asEtherRingPortTable/asEtherRingPortEntry/asEtherRingPortState
  • /iso/org/dod/internet/private/vendor-objects/nec/nec-mib/necProductDepend/radioEquipment/pasoNeoIpe-common/alarmStatusGroup/asEtherRingGroup/asEtherRingPortTable/asEtherRingPortEntry/asEtherRingPortState
  • /iso/iso-identified-organization/dod/internet/private/enterprise/nec/nec-mib/necProductDepend/radioEquipment/pasoNeoIpe-common/alarmStatusGroup/asEtherRingGroup/asEtherRingPortTable/asEtherRingPortEntry/asEtherRingPortState
  • /iso/iso-identified-organization/dod/internet/private/enterprises/nec/nec-mib/necProductDepend/radioEquipment/pasoNeoIpe-common/alarmStatusGroup/asEtherRingGroup/asEtherRingPortTable/asEtherRingPortEntry/asEtherRingPortState
  • /iso/iso-identified-organization/dod/internet/private/ldap-enterprise/nec/nec-mib/necProductDepend/radioEquipment/pasoNeoIpe-common/alarmStatusGroup/asEtherRingGroup/asEtherRingPortTable/asEtherRingPortEntry/asEtherRingPortState
  • /iso/iso-identified-organization/dod/internet/private/vendor-objects/nec/nec-mib/necProductDepend/radioEquipment/pasoNeoIpe-common/alarmStatusGroup/asEtherRingGroup/asEtherRingPortTable/asEtherRingPortEntry/asEtherRingPortState
  • /iso/iso-organization/dod/internet/private/enterprise/nec/nec-mib/necProductDepend/radioEquipment/pasoNeoIpe-common/alarmStatusGroup/asEtherRingGroup/asEtherRingPortTable/asEtherRingPortEntry/asEtherRingPortState
  • /iso/iso-organization/dod/internet/private/enterprises/nec/nec-mib/necProductDepend/radioEquipment/pasoNeoIpe-common/alarmStatusGroup/asEtherRingGroup/asEtherRingPortTable/asEtherRingPortEntry/asEtherRingPortState
  • /iso/iso-organization/dod/internet/private/ldap-enterprise/nec/nec-mib/necProductDepend/radioEquipment/pasoNeoIpe-common/alarmStatusGroup/asEtherRingGroup/asEtherRingPortTable/asEtherRingPortEntry/asEtherRingPortState
  • /iso/iso-organization/dod/internet/private/vendor-objects/nec/nec-mib/necProductDepend/radioEquipment/pasoNeoIpe-common/alarmStatusGroup/asEtherRingGroup/asEtherRingPortTable/asEtherRingPortEntry/asEtherRingPortState

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-only
Status in MIB
current

Enumerated values

ValueName
0invalid
1disabled
2initBlocking
3rplBlocking
4forwarding
5signalFail
6recovery
7waitToRestore
8forcedSwitch
9manualSwitch
10waitToBlock

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.

Published row index: asEtherRingPortRingIndex, asEtherRingPortId.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.119.2.3.69.501.3.39.2.1.4

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

asEtherRingPortState OBJECT-TYPE
        SYNTAX       INTEGER {
                         invalid(0),
                         disabled(1),
                         initBlocking(2),
                         rplBlocking(3),
                         forwarding(4),
                         signalFail(5),
                         recovery(6),
                         waitToRestore(7),
                         forcedSwitch(8),
                         manualSwitch(9),
                         waitToBlock(10)
                     }
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION  
            "Port Status.
            'initBlocking' is the initial value. At this point the no R-APS
            frame is received. When the port is configured as RPL port and
            the port is closed, the value will show 'rplBlocking'. The port
            forwards the frames, the value will show 'forwarding'.
            If the signal failure is detected on the port and the port is
            closed, the object will return the value 'signalFail'. And then
            the condition of Signal Failure is cleared but the port is still
            closed, the object will return the value 'recovery'.
            'waitToRestore' shows the RPL port is still closed till expiring
            the wait-to-restore timer.
            'forcedSwitch' and 'manualSwitch' represents the port is
            controlled by the maintenance control. 'waitToBlock' is waiting
            the RPL Port open after clearing maintenance control."
        ::= { asEtherRingPortEntry 4 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Port Status. 'initBlocking' is the initial value. At this point the no R-APS frame is received. When the port is configured as RPL port and the port is closed, the value will show 'rplBlocking'. The port forwards the frames, the value will show 'forwarding'. If the signal failure is detected on the port and the port is closed, the object will return the value 'signalFail'. And then the condition of Signal Failure is cleared but the port is still closed, the object will return the value 'recovery'. 'waitToRestore' shows the RPL port is still closed till expiring the wait-to-restore timer. 'forcedSwitch' and 'manualSwitch' represents the port is controlled by the maintenance control. 'waitToBlock' is waiting the RPL Port open after clearing maintenance control.

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 1

asEtherRingPortState · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: asEtherRingPortState

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "asEtherRingPortState",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "invalid",
    "(",
    "0",
    ")",
    ",",
    "disabled",
    "(",
    "1",
    ")",
    ",",
    "initBlocking",
    "(",
    "2",
    ")",
    ",",
    "rplBlocking",
    "(",
    "3",
    ")",
    ",",
    "forwarding",
    "(",
    "4",
    ")",
    ",",
    "signalFail",
    "(",
    "5",
    ")",
    ",",
    "recovery",
    "(",
    "6",
    ")",
    ",",
    "waitToRestore",
    "(",
    "7",
    ")",
    ",",
    "forcedSwitch",
    "(",
    "8",
    ")",
    ",",
    "manualSwitch",
    "(",
    "9",
    ")",
    ",",
    "waitToBlock",
    "(",
    "10",
    ")",
    "}",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"Port Status. 'initBlocking' is the initial value. At this point the no R-APS frame is received. When the port is configured as RPL port and the port is closed, the value will show 'rplBlocking'. The port forwards the frames, the value will show 'forwarding'. If the signal failure is detected on the port and the port is closed, the object will return the value 'signalFail'. And then the condition of Signal Failure is cleared but the port is still closed, the object will return the value 'recovery'. 'waitToRestore' shows the RPL port is still closed till expiring the wait-to-restore timer. 'forcedSwitch' and 'manualSwitch' represents the port is controlled by the maintenance control. 'waitToBlock' is waiting the RPL Port open after clearing maintenance control.\"",
    "::=",
    "{",
    "asEtherRingPortEntry",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "invalid",
            0
          ],
          [
            "disabled",
            1
          ],
          [
            "initBlocking",
            2
          ],
          [
            "rplBlocking",
            3
          ],
          [
            "forwarding",
            4
          ],
          [
            "signalFail",
            5
          ],
          [
            "recovery",
            6
          ],
          [
            "waitToRestore",
            7
          ],
          [
            "forcedSwitch",
            8
          ],
          [
            "manualSwitch",
            9
          ],
          [
            "waitToBlock",
            10
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Port Status. 'initBlocking' is the initial value. At this point the no R-APS frame is received. When the port is configured as RPL port and the port is closed, the value will show 'rplBlocking'. The port forwards the frames, the value will show 'forwarding'. If the signal failure is detected on the port and the port is closed, the object will return the value 'signalFail'. And then the condition of Signal Failure is cleared but the port is still closed, the object will return the value 'recovery'. 'waitToRestore' shows the RPL port is still closed till expiring the wait-to-restore timer. 'forcedSwitch' and 'manualSwitch' represents the port is controlled by the maintenance control. 'waitToBlock' is waiting the RPL Port open after clearing maintenance control."
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.119)

Akiyama Yoshiyuki

Siblings (5)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.119.2.3.69.501.3.39.2.1.1 asEtherRingPortRingIndex00
1.3.6.1.4.1.119.2.3.69.501.3.39.2.1.2 asEtherRingPortId00
1.3.6.1.4.1.119.2.3.69.501.3.39.2.1.3 asEtherRingPortNEAddress00
1.3.6.1.4.1.119.2.3.69.501.3.39.2.1.5 asEtherRingPortLoopDetect00
1.3.6.1.4.1.119.2.3.69.501.3.39.2.1.6 asEtherRingPortProtoTimeout00