Status in source: mandatory.
Names: sensorSourceOccupancy
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"sensorSourceOccupancy",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"255",
")",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\" <Definition> Indicates the occupancy of the gathered data. This value is retrieved from ASC.detectorOccupancy. The DESCRIPTION in NTCIP 1202 v02 states: Detector Occupancy data collected over the Volume / Occupancy Period or Detector Unit Diagnostic Information. The value of the object shall indicate occupancy or detector diagnostic information as follows: Range Meaning 0-200 Detector Occupancy in 0.5% Increments 201-209 Reserved 210 Max Presence Fault 211 No Activity Fault 212 Open loop Fault 213 Shorted loop Fault 214 Excessive Change Fault 215 Reserved 216 Watchdog Fault 217 Erratic Output Fault 218-255 Reserved Faults shall be indicated for all collection periods during which a fault is detected if either occupancy data or volume data is being collected. The highest numbered fault shall be presented if more than one fault is active (i.e. indicate OpenLoop rather than NoActivity). <Object Identifier> 1.3.6.1.4.1.1206.4.2.10.13.2.1.9\"",
"::=",
"{",
"sensorDataEntry",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"<Definition> Indicates the occupancy of the gathered data. This value is retrieved from ASC.detectorOccupancy. The DESCRIPTION in NTCIP 1202 v02 states: Detector Occupancy data collected over the Volume / Occupancy Period or Detector Unit Diagnostic Information. The value of the object shall indicate occupancy or detector diagnostic information as follows: Range Meaning 0-200 Detector Occupancy in 0.5% Increments 201-209 Reserved 210 Max Presence Fault 211 No Activity Fault 212 Open loop Fault 213 Shorted loop Fault 214 Excessive Change Fault 215 Reserved 216 Watchdog Fault 217 Erratic Output Fault 218-255 Reserved Faults shall be indicated for all collection periods during which a fault is detected if either occupancy data or volume data is being collected. The highest numbered fault shall be presented if more than one fault is active (i.e. indicate OpenLoop rather than NoActivity). <Object Identifier> 1.3.6.1.4.1.1206.4.2.10.13.2.1.9"
],
null,
null,
null,
null
]
}
- NTCIP published standard MIB annexes (reviewed modules)
· Publisher's source file: NTCIP 1210 v01, Field Master Stations (FMS)—Part 1: Object Definitions for Signal System Masters (SSM) Published September 2013 — original PDF
· Official record
Module: NTCIP1210v01-51
See published definition above
Module imports
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['IpAddress', 'null', 'Counter'], 'RFC1213-MIB': ['DisplayString'], 'NTCIP8004v0217-SMI': ['OwnerString', 'BITMAP8', 'BITMAP16', 'ssm'], 'NTCIP1103v0217-STMP': ['ConfigEntryStatus']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: A typographic opening DESCRIPTION quotation delimiter occurs immediately at a native SMI field boundary. Normalize this delimiter only in the derived transcription; retain the literal published definition, full description and unchanged numeric assignments.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: NTCIP8004v0217-SMI. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP1210v0155r.pdf — NTCIP1210v01-51 (MIB transcription)
Related source files and packages:
Show more related files and packages