OID reference
1.3.6.1.4.1.1206.4.2.18.16.3
<Definition> The current mode of operation of the RSU. Standby indicates the V2X radios are not enabled and interface logging is disabled. Fault mode indicates the RSU is not fully functional, is not transmitting messages over the V2X interface, but allows the RSU to upload and install a new firmware or application ve…
Identification
{1 3 6 1 4 1 1206 4 2 18 16 3}
| Value | Name |
|---|---|
| 1 | other |
| 2 | standby |
| 3 | operate |
| 4 | fault |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.1206.4.2.18.16.3.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
rsuModeStatus OBJECT-TYPE
SYNTAX INTEGER { other (1),
standby (2),
operate (3),
fault (4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "<Definition> The current mode of operation of the RSU.
Standby indicates the V2X radios are not enabled and interface
logging is disabled. Fault mode indicates the RSU is not fully
functional, is not transmitting messages over the V2X interface, but
allows the RSU to upload and install a new firmware or application
version.
<Object Identifier> 1.3.6.1.4.1.1.1206.4.2.18.16.3"
::= { rsuSystemStatus 3 }rsuModeStatus OBJECT-TYPE
SYNTAX INTEGER { other (1),
standby (2),
operate (3),
fault (4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "<Definition> The current mode of operation of the RSU.
Standby indicates the V2X radios are not enabled and interface
logging is disabled. Fault mode indicates the RSU is not fully
functional, is not transmitting messages over the V2X interface, but
allows the RSU to download and install a new firmware or application
version. See Section 4.3.1 for the State Machine Definition.
<Object Identifier> 1.3.6.1.4.1.1206.4.2.18.16.3"
::= { rsuSystemStatus 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
<Definition> The current mode of operation of the RSU. Standby indicates the V2X radios are not enabled and interface logging is disabled. Fault mode indicates the RSU is not fully functional, is not transmitting messages over the V2X interface, but allows the RSU to upload and install a new firmware or application version. <Object Identifier> 1.3.6.1.4.1.1.1206.4.2.18.16.3
NTCIP published standard MIB annexes (reviewed modules)
Description 2
<Definition> The current mode of operation of the RSU. Standby indicates the V2X radios are not enabled and interface logging is disabled. Fault mode indicates the RSU is not fully functional, is not transmitting messages over the V2X interface, but allows the RSU to download and install a new firmware or application version. See Section 4.3.1 for the State Machine Definition. <Object Identifier> 1.3.6.1.4.1.1206.4.2.18.16.3
NTCIP published standard MIB annexes (reviewed modules)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: unconfirmed.
Names: rsuModeStatus
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rsuModeStatus",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"other",
"(",
"1",
")",
",",
"standby",
"(",
"2",
")",
",",
"operate",
"(",
"3",
")",
",",
"fault",
"(",
"4",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"<Definition> The current mode of operation of the RSU. Standby indicates the V2X radios are not enabled and interface logging is disabled. Fault mode indicates the RSU is not fully functional, is not transmitting messages over the V2X interface, but allows the RSU to upload and install a new firmware or application version. <Object Identifier> 1.3.6.1.4.1.1.1206.4.2.18.16.3\"",
"::=",
"{",
"rsuSystemStatus",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"other",
1
],
[
"standby",
2
],
[
"operate",
3
],
[
"fault",
4
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"<Definition> The current mode of operation of the RSU. Standby indicates the V2X radios are not enabled and interface logging is disabled. Fault mode indicates the RSU is not fully functional, is not transmitting messages over the V2X interface, but allows the RSU to upload and install a new firmware or application version. <Object Identifier> 1.3.6.1.4.1.1.1206.4.2.18.16.3"
],
null,
null,
null,
null
]
}Module: NTCIP1218-v01
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DateAndTime', 'RowStatus', 'DisplayString', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'NOTIFICATION-TYPE', 'enterprises'], 'URI-TC-MIB': ['Uri255', 'Uri1024'], 'SYSLOG-TC-MIB': ['SyslogSeverity']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: Published source disagreement: this literal SMI assignment resolves to 1.3.6.1.4.1.1206.4.2.18.16.3, but its DESCRIPTION explicitly lists 1.3.6.1.4.1.1.1206.4.2.18.16.3. Both published numeric claims are retained as unconfirmed evidence. Neither value is presented as a verified correction or an independently confirmed registration; consult the original file and the applicable standard edition.
Source data warning: The DESCRIPTION also prints 1.3.6.1.4.1.1.1206.4.2.18.16.3, outside the NTCIP/NEMA namespace documented by this MIB. These numbers remain conflicting source citations; no additional registration pages are created from these descriptive references. The typed SMI assignment is unchanged.
· Download NTCIP-1218v0138-RSU-toUSDOT-20200905.pdf — NTCIP1218-v01 (MIB transcription)Related source files and packages:
Status in source: current.
Names: rsuModeStatus
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rsuModeStatus",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"other",
"(",
"1",
")",
",",
"standby",
"(",
"2",
")",
",",
"operate",
"(",
"3",
")",
",",
"fault",
"(",
"4",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"<Definition> The current mode of operation of the RSU. Standby indicates the V2X radios are not enabled and interface logging is disabled. Fault mode indicates the RSU is not fully functional, is not transmitting messages over the V2X interface, but allows the RSU to download and install a new firmware or application version. See Section 4.3.1 for the State Machine Definition. <Object Identifier> 1.3.6.1.4.1.1206.4.2.18.16.3\"",
"::=",
"{",
"rsuSystemStatus",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"other",
1
],
[
"standby",
2
],
[
"operate",
3
],
[
"fault",
4
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"<Definition> The current mode of operation of the RSU. Standby indicates the V2X radios are not enabled and interface logging is disabled. Fault mode indicates the RSU is not fully functional, is not transmitting messages over the V2X interface, but allows the RSU to download and install a new firmware or application version. See Section 4.3.1 for the State Machine Definition. <Object Identifier> 1.3.6.1.4.1.1206.4.2.18.16.3"
],
null,
null,
null,
null
]
}Module: NTCIP1218-v01
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DateAndTime', 'RowStatus', 'DisplayString', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'NOTIFICATION-TYPE', 'enterprises'], 'URI-TC-MIB': ['Uri255', 'Uri1024'], 'NTCIP8004v02': ['devices', 'OerString'], 'SYSLOG-TC-MIB': ['SyslogSeverity'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: NTCIP8004v02. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP-1218-v01A-2024-AsPublished.pdf — NTCIP1218-v01 (MIB transcription)Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1206.4.2.18.16.1 | rsuChanStatus | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.18.16.2 | rsuMode | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.18.16.4 | rsuReboot | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.18.16.5 | rsuClockSource | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.18.16.6 | rsuClockSourceStatus | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.18.16.7 | rsuClockSourceTimeout | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.18.16.8 | rsuClockSourceFailedQuery | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.18.16.9 | rsuClockDeviationTolerance | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.18.16.10 | rsuStatus | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.18.16.11 | rsuPc5Status | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.18.16.12 | rsuPc5Status, rsuRebootSetting | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.18.16.13 | rsuRebootSetting | 0 | 0 |