Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rsuWsaHeaderOptions",
"OBJECT-TYPE",
"SYNTAX",
"BITS",
"{",
"secured",
"(",
"0",
")",
",",
"wra",
"(",
"1",
")",
",",
"repeatRate",
"(",
"2",
")",
",",
"twoDLocation",
"(",
"3",
")",
",",
"threeDLocation",
"(",
"4",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"<Definition> A bit-mapped value as defined below for configuring the transmitted WSA headers. BIT 0 0=unsecuredWsa, 1=securedWsa BIT 1 WRA 0=not transmitted, 1=transmitted BIT 2 Repeat Rate 0=not transmitted, 1=transmitted BIT 3 2DLocation 0=not transmitted, 1=transmitted BIT 4 3DLocation 0=not transmitted, 1=transmitted BIT 5 Reserved BIT 6 Reserved BIT 7 Reserved Bit 0 - Indicates if security processing to be applied to the transmitted WSA. This should normally be 1=securedWsa. Bit 1 - Indicates if the WSA should include the WAVE Routing Advertisement. Bit 2 - Indicates if the Repeat Rate is transmitted in the WSA Header. Bit 3 - Indicates if the 2DLocation is transmitted in the WSA Header. The 2DLocation value is defined by rsuLocationLat and rsuLocationLong. If Bit 4=1, then the 3DLocation value is transmitted and 2DLocation is not. Bit 4 - Indicates if the 3DLocation is transmitted in the WSA Header. The 2DLocation value is defined by rsuLocationLat, rsuLocationLong and rsuLocationElv. See Section 2.5 of RFC 3416 for encoding. <Object Identifier> 1.3.6.1.4.1.1206.4.2.18.9.5\"",
"REFERENCE",
"\"IEEE 1609.3 dot3WsaType, IEEE 1609.3 dot3ProviderIpService, IEEE 1609.3 dot3ProviderRepeatRate\"",
"::=",
"{",
"rsuWsaConfig",
"5",
"}"
],
"syntax_tree": [
[
"BITS",
[
[
"secured",
0
],
[
"wra",
1
],
[
"repeatRate",
2
],
[
"twoDLocation",
3
],
[
"threeDLocation",
4
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"<Definition> A bit-mapped value as defined below for configuring the transmitted WSA headers. BIT 0 0=unsecuredWsa, 1=securedWsa BIT 1 WRA 0=not transmitted, 1=transmitted BIT 2 Repeat Rate 0=not transmitted, 1=transmitted BIT 3 2DLocation 0=not transmitted, 1=transmitted BIT 4 3DLocation 0=not transmitted, 1=transmitted BIT 5 Reserved BIT 6 Reserved BIT 7 Reserved Bit 0 - Indicates if security processing to be applied to the transmitted WSA. This should normally be 1=securedWsa. Bit 1 - Indicates if the WSA should include the WAVE Routing Advertisement. Bit 2 - Indicates if the Repeat Rate is transmitted in the WSA Header. Bit 3 - Indicates if the 2DLocation is transmitted in the WSA Header. The 2DLocation value is defined by rsuLocationLat and rsuLocationLong. If Bit 4=1, then the 3DLocation value is transmitted and 2DLocation is not. Bit 4 - Indicates if the 3DLocation is transmitted in the WSA Header. The 2DLocation value is defined by rsuLocationLat, rsuLocationLong and rsuLocationElv. See Section 2.5 of RFC 3416 for encoding. <Object Identifier> 1.3.6.1.4.1.1206.4.2.18.9.5"
],
[
"REFERENCE",
"IEEE 1609.3 dot3WsaType, IEEE 1609.3 dot3ProviderIpService, IEEE 1609.3 dot3ProviderRepeatRate"
],
null,
null,
null
]
}