OID reference
1.3.6.1.4.1.1206.4.2.7.6.8
Identifies the high and low thresholds for the washer fluid alarm, as shown below; Byte1 Low Threshold denotes the percentage of minimum filled capacity between zero (0) and 100 percent, Byte2 High Threshold denotes the percentage of maximum filled capacity between zero (0) and 100 percent.
Identification
{1 3 6 1 4 1 1206 4 2 7 6 8}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.1206.4.2.7.6.8.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
alarmWasherFluidHighLowThreshold OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
ACCESS read-write
STATUS mandatory
DESCRIPTION “Identifies the high and low thresholds for the washer fluid alarm, as shown below;
Byte1 Low Threshold denotes the percentage of minimum filled capacity between zero
(0) and 100 percent,
Byte2 High Threshold denotes the percentage of maximum filled capacity between zero
(0) and 100 percent.”
::= {cctvAlarm 8}alarmWasherFluidHighLowThreshold OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
ACCESS read-write
STATUS mandatory
DESCRIPTION “Identifies the high and low thresholds for the washer fluid alarm, as shown below;
Byte1 Low Threshold denotes the percentage of minimum filled capacity between zero (0) and
100 percent,
Byte2 HighThreshold denotes the percentage of maximum filled capacity between zero (0) and
100 percent.”
::= { cctvAlarm 8 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Identifies the high and low thresholds for the washer fluid alarm, as shown below; Byte1 Low Threshold denotes the percentage of minimum filled capacity between zero (0) and 100 percent, Byte2 High Threshold denotes the percentage of maximum filled capacity between zero (0) and 100 percent.
NTCIP published standard MIB annexes (reviewed modules)
Description 2
Identifies the high and low thresholds for the washer fluid alarm, as shown below; Byte1 Low Threshold denotes the percentage of minimum filled capacity between zero (0) and 100 percent, Byte2 HighThreshold denotes the percentage of maximum filled capacity between zero (0) and 100 percent.
NTCIP published standard MIB annexes (reviewed modules)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: alarmWasherFluidHighLowThreshold
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"alarmWasherFluidHighLowThreshold",
"OBJECT-TYPE",
"SYNTAX",
"OCTET",
"STRING",
"(",
"SIZE",
"(",
"2",
")",
")",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"“",
"Identifies",
"the",
"high",
"and",
"low",
"thresholds",
"for",
"the",
"washer",
"fluid",
"alarm",
",",
"as",
"shown",
"below",
";",
"Byte1",
"Low",
"Threshold",
"denotes",
"the",
"percentage",
"of",
"minimum",
"filled",
"capacity",
"between",
"zero",
"(",
"0",
")",
"and",
"100",
"percent",
",",
"Byte2",
"High",
"Threshold",
"denotes",
"the",
"percentage",
"of",
"maximum",
"filled",
"capacity",
"between",
"zero",
"(",
"0",
")",
"and",
"100",
"percent",
".",
"”",
"::=",
"{",
"cctvAlarm",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"OCTET STRING",
[
"octetStringSubType",
[
[
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"Identifies the high and low thresholds for the washer fluid alarm, as shown below; Byte1 Low Threshold denotes the percentage of minimum filled capacity between zero (0) and 100 percent, Byte2 High Threshold denotes the percentage of maximum filled capacity between zero (0) and 100 percent."
],
null,
null,
null,
null
]
}Module: CCTV-MIB1
See published definition above
{'TMIB-II': ['devices'], 'RFC-1212': ['OBJECT-TYPE']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: A typographic closing DESCRIPTION quotation delimiter occurs immediately at a native SMI field boundary. Normalize this delimiter only in the derived transcription; retain the literal published definition, full description and unchanged numeric assignments.
Source data warning: A typographic closing quotation mark terminates a DESCRIPTION in this PDF. Normalize that delimiter only in the derived MIB transcription; preserve the literal published definition and unmodified PDF. No numeric assignment changes.
Source data warning: A typographic opening DESCRIPTION quotation delimiter occurs immediately at a native SMI field boundary. Normalize this delimiter only in the derived transcription; retain the literal published definition, full description and unchanged numeric assignments.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: TMIB-II. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP1205v01Amd1-14j-1.pdf — CCTV-MIB1 (MIB transcription)Related source files and packages:
Status in source: mandatory.
Names: alarmWasherFluidHighLowThreshold
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"alarmWasherFluidHighLowThreshold",
"OBJECT-TYPE",
"SYNTAX",
"OCTET",
"STRING",
"(",
"SIZE",
"(",
"2",
")",
")",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"“",
"Identifies",
"the",
"high",
"and",
"low",
"thresholds",
"for",
"the",
"washer",
"fluid",
"alarm",
",",
"as",
"shown",
"below",
";",
"Byte1",
"Low",
"Threshold",
"denotes",
"the",
"percentage",
"of",
"minimum",
"filled",
"capacity",
"between",
"zero",
"(",
"0",
")",
"and",
"100",
"percent",
",",
"Byte2",
"HighThreshold",
"denotes",
"the",
"percentage",
"of",
"maximum",
"filled",
"capacity",
"between",
"zero",
"(",
"0",
")",
"and",
"100",
"percent",
".",
"”",
"::=",
"{",
"cctvAlarm",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"OCTET STRING",
[
"octetStringSubType",
[
[
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"Identifies the high and low thresholds for the washer fluid alarm, as shown below; Byte1 Low Threshold denotes the percentage of minimum filled capacity between zero (0) and 100 percent, Byte2 HighThreshold denotes the percentage of maximum filled capacity between zero (0) and 100 percent."
],
null,
null,
null,
null
]
}Module: CCTV-MIB1
See published definition above
{'TMIB': ['profiles', 'devices'], 'RFC-1212': ['OBJECT-TYPE']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: A typographic closing DESCRIPTION quotation delimiter occurs immediately at a native SMI field boundary. Normalize this delimiter only in the derived transcription; retain the literal published definition, full description and unchanged numeric assignments.
Source data warning: A typographic opening DESCRIPTION quotation delimiter occurs immediately at a native SMI field boundary. Normalize this delimiter only in the derived transcription; retain the literal published definition, full description and unchanged numeric assignments.
Source data warning: The outputControl DESCRIPTION ends with a typographic quote immediately before a page break and its own assignment. Normalize that delimiter in the parsing copy; preserve the complete literal description and numeric suffix.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: TMIB, missing or unreadable imports of cctv. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP1205v0108b.pdf — CCTV-MIB1 (MIB transcription)Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1206.4.2.7.6.1 | alarmStatus | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.7.6.2 | alarmLatchStatus | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.7.6.3 | alarmLatchClear | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.7.6.4 | alarmTemperatureHighLowThreshold, alarmTemparatureHighLowThreshold | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.7.6.5 | alarmTemperatureCurrentValue, alarmTemparatureCurrentValue | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.7.6.6 | alarmPressureHighLowThreshold, alarmPresureHighLowThreshold | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.7.6.7 | alarmPressureCurrentValue, alarmPresureCurrentValue | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.7.6.9 | alarmWasherFluidCurrentValue | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.7.6.10 | alarmLabelIndex | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.7.6.11 | alarmLabelSource | 0 | 0 |