Status in source: current.
Names: cienaCesMplsTunnelARHopTable
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"cienaCesMplsTunnelARHopTable",
"OBJECT-TYPE",
"SYNTAX",
"SEQUENCE",
"OF",
"CienaCesMplsTunnelARHopEntry",
"MAX-ACCESS",
"not-accessible",
"STATUS",
"current",
"DESCRIPTION",
"\"The mplsTunnelARHopTable is used to indicate the hops for an MPLS tunnel defined in mplsTunnelTable, as reported by the MPLS signalling protocol. Thus at a transit LSR, this table (if the table is supported and if the signaling protocol is recording actual route information) contains the actual route of the whole tunnel. If the signaling protocol is not recording the actual route, this table MAY report the information from the mplsTunnelHopTable or the mplsTunnelCHopTable. Each row in this table is indexed by mplsTunnelARHopListIndex. Each row also has a secondary index mplsTunnelARHopIndex, corresponding to the next hop that this row corresponds to. Please note that since the information necessary to build entries within this table is not provided by some MPLS signalling protocols, implementation of this table is optional. Furthermore, since the information in this table is actually provided by the MPLS signalling protocol after the path has been set-up, the entries in this table are provided only for observation, and hence, all variables in this table are accessible exclusively as read- only. Note also that the contencts of this table may change while it is being read because of re-routing activities. A network administrator may verify that the actual route read is consistent by reference to the mplsTunnelLastPathChange object.\"",
"::=",
"{",
"cienaCesMpls",
"13",
"}"
],
"syntax_tree": [
[
"conceptualTable",
[
"row",
"CienaCesMplsTunnelARHopEntry"
]
],
null,
[
"MaxAccessPart",
"not-accessible"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The mplsTunnelARHopTable is used to indicate the hops for an MPLS tunnel defined in mplsTunnelTable, as reported by the MPLS signalling protocol. Thus at a transit LSR, this table (if the table is supported and if the signaling protocol is recording actual route information) contains the actual route of the whole tunnel. If the signaling protocol is not recording the actual route, this table MAY report the information from the mplsTunnelHopTable or the mplsTunnelCHopTable. Each row in this table is indexed by mplsTunnelARHopListIndex. Each row also has a secondary index mplsTunnelARHopIndex, corresponding to the next hop that this row corresponds to. Please note that since the information necessary to build entries within this table is not provided by some MPLS signalling protocols, implementation of this table is optional. Furthermore, since the information in this table is actually provided by the MPLS signalling protocol after the path has been set-up, the entries in this table are provided only for observation, and hence, all variables in this table are accessible exclusively as read- only. Note also that the contencts of this table may change while it is being read because of re-routing activities. A network administrator may verify that the actual route read is consistent by reference to the mplsTunnelLastPathChange object."
],
null,
null,
null,
null
]
}
- Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
· Publisher's source file: CIENA-CES-MPLS-MIB
Vendor MIB copy from the LibreNMS archive.
Module: CIENA-CES-MPLS-MIB
See published definition above
Module imports
{'CIENA-TC': ['CienaGlobalState'], 'CIENA-SMI': ['cienaCesConfig', 'cienaCesNotifications'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'MacAddress', 'TEXTUAL-CONVENTION', 'RowStatus', 'RowPointer', 'StorageType', 'TimeStamp'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'Integer32', 'Unsigned32', 'IpAddress', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE'], 'MPLS-TC-STD-MIB': ['MplsBitRate'], 'CIENA-GLOBAL-MIB': ['cienaGlobalSeverity', 'cienaGlobalMacAddress'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}
· Download CIENA-CES-MPLS-MIB
Related source files and packages:
Same file in Observium Community.