OID reference

cienaCesPbtTunnelReversionState

1.3.6.1.4.1.1271.2.1.6.1.1.1.4

Description

Protection of the transport mechanism in PBB-TE is achieved using redundant tunnels. A protected PBB-TE tunnel is backed up by a standby PBB-TE tunnel serving the same destination. The former is marked as the primary tunnel and the latter as the backup tunnel. Protection switching in PBB-TE requires both the ingress a…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.1271.2.1.6.1.1.1 (cienaCesPbtGlobalAttrs)
Node code
4
Node name
cienaCesPbtTunnelReversionState
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.1271.2.1.6.1.1.1.4
URN notation
urn:oid:1.3.6.1.4.1.1271.2.1.6.1.1.1.4
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 1271 2 1 6 1 1 1 4}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) ciena(1271) cienaCes(2) cienaCesConfig(1) cienaCesPbtMIB(6) cienaCesPbtMIBObjects(1) cienaCesPbt(1) cienaCesPbtGlobalAttrs(1) cienaCesPbtTunnelReversionState(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) ciena(1271) cienaCes(2) cienaCesConfig(1) cienaCesPbtMIB(6) cienaCesPbtMIBObjects(1) cienaCesPbt(1) cienaCesPbtGlobalAttrs(1) cienaCesPbtTunnelReversionState(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) ciena(1271) cienaCes(2) cienaCesConfig(1) cienaCesPbtMIB(6) cienaCesPbtMIBObjects(1) cienaCesPbt(1) cienaCesPbtGlobalAttrs(1) cienaCesPbtTunnelReversionState(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) ciena(1271) cienaCes(2) cienaCesConfig(1) cienaCesPbtMIB(6) cienaCesPbtMIBObjects(1) cienaCesPbt(1) cienaCesPbtGlobalAttrs(1) cienaCesPbtTunnelReversionState(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) ciena(1271) cienaCes(2) cienaCesConfig(1) cienaCesPbtMIB(6) cienaCesPbtMIBObjects(1) cienaCesPbt(1) cienaCesPbtGlobalAttrs(1) cienaCesPbtTunnelReversionState(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) ciena(1271) cienaCes(2) cienaCesConfig(1) cienaCesPbtMIB(6) cienaCesPbtMIBObjects(1) cienaCesPbt(1) cienaCesPbtGlobalAttrs(1) cienaCesPbtTunnelReversionState(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) ciena(1271) cienaCes(2) cienaCesConfig(1) cienaCesPbtMIB(6) cienaCesPbtMIBObjects(1) cienaCesPbt(1) cienaCesPbtGlobalAttrs(1) cienaCesPbtTunnelReversionState(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) ciena(1271) cienaCes(2) cienaCesConfig(1) cienaCesPbtMIB(6) cienaCesPbtMIBObjects(1) cienaCesPbt(1) cienaCesPbtGlobalAttrs(1) cienaCesPbtTunnelReversionState(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) ciena(1271) cienaCes(2) cienaCesConfig(1) cienaCesPbtMIB(6) cienaCesPbtMIBObjects(1) cienaCesPbt(1) cienaCesPbtGlobalAttrs(1) cienaCesPbtTunnelReversionState(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) ciena(1271) cienaCes(2) cienaCesConfig(1) cienaCesPbtMIB(6) cienaCesPbtMIBObjects(1) cienaCesPbt(1) cienaCesPbtGlobalAttrs(1) cienaCesPbtTunnelReversionState(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) ciena(1271) cienaCes(2) cienaCesConfig(1) cienaCesPbtMIB(6) cienaCesPbtMIBObjects(1) cienaCesPbt(1) cienaCesPbtGlobalAttrs(1) cienaCesPbtTunnelReversionState(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) ciena(1271) cienaCes(2) cienaCesConfig(1) cienaCesPbtMIB(6) cienaCesPbtMIBObjects(1) cienaCesPbt(1) cienaCesPbtGlobalAttrs(1) cienaCesPbtTunnelReversionState(4)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) ciena(1271) cienaCes(2) cienaCesConfig(1) cienaCesPbtMIB(6) cienaCesPbtMIBObjects(1) cienaCesPbt(1) cienaCesPbtGlobalAttrs(1) cienaCesPbtTunnelReversionState(4)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) ciena(1271) cienaCes(2) cienaCesConfig(1) cienaCesPbtMIB(6) cienaCesPbtMIBObjects(1) cienaCesPbt(1) cienaCesPbtGlobalAttrs(1) cienaCesPbtTunnelReversionState(4)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) ciena(1271) cienaCes(2) cienaCesConfig(1) cienaCesPbtMIB(6) cienaCesPbtMIBObjects(1) cienaCesPbt(1) cienaCesPbtGlobalAttrs(1) cienaCesPbtTunnelReversionState(4)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) ciena(1271) cienaCes(2) cienaCesConfig(1) cienaCesPbtMIB(6) cienaCesPbtMIBObjects(1) cienaCesPbt(1) cienaCesPbtGlobalAttrs(1) cienaCesPbtTunnelReversionState(4)}
OID-IRI notation
  • /1/3/6/1/4/1/1271/2/1/6/1/1/1/4
  • /ISO/Identified-Organization/6/1/4/1/1271/2/1/6/1/1/1/4
  • /ISO/3/6/1/4/1/1271/2/1/6/1/1/1/4
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/1271/cienaCes/cienaCesConfig/cienaCesPbtMIB/cienaCesPbtMIBObjects/cienaCesPbt/cienaCesPbtGlobalAttrs/cienaCesPbtTunnelReversionState
  • /iso/identified-organization/dod/internet/private/enterprise/ciena/cienaCes/cienaCesConfig/cienaCesPbtMIB/cienaCesPbtMIBObjects/cienaCesPbt/cienaCesPbtGlobalAttrs/cienaCesPbtTunnelReversionState
  • /iso/identified-organization/dod/internet/private/enterprises/1271/cienaCes/cienaCesConfig/cienaCesPbtMIB/cienaCesPbtMIBObjects/cienaCesPbt/cienaCesPbtGlobalAttrs/cienaCesPbtTunnelReversionState
  • /iso/identified-organization/dod/internet/private/enterprises/ciena/cienaCes/cienaCesConfig/cienaCesPbtMIB/cienaCesPbtMIBObjects/cienaCesPbt/cienaCesPbtGlobalAttrs/cienaCesPbtTunnelReversionState
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/1271/cienaCes/cienaCesConfig/cienaCesPbtMIB/cienaCesPbtMIBObjects/cienaCesPbt/cienaCesPbtGlobalAttrs/cienaCesPbtTunnelReversionState
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/ciena/cienaCes/cienaCesConfig/cienaCesPbtMIB/cienaCesPbtMIBObjects/cienaCesPbt/cienaCesPbtGlobalAttrs/cienaCesPbtTunnelReversionState
  • /iso/identified-organization/dod/internet/private/vendor-objects/1271/cienaCes/cienaCesConfig/cienaCesPbtMIB/cienaCesPbtMIBObjects/cienaCesPbt/cienaCesPbtGlobalAttrs/cienaCesPbtTunnelReversionState
  • /iso/identified-organization/dod/internet/private/vendor-objects/ciena/cienaCes/cienaCesConfig/cienaCesPbtMIB/cienaCesPbtMIBObjects/cienaCesPbt/cienaCesPbtGlobalAttrs/cienaCesPbtTunnelReversionState
  • /iso/org/dod/internet/private/enterprise/1271/cienaCes/cienaCesConfig/cienaCesPbtMIB/cienaCesPbtMIBObjects/cienaCesPbt/cienaCesPbtGlobalAttrs/cienaCesPbtTunnelReversionState
  • /iso/org/dod/internet/private/enterprise/ciena/cienaCes/cienaCesConfig/cienaCesPbtMIB/cienaCesPbtMIBObjects/cienaCesPbt/cienaCesPbtGlobalAttrs/cienaCesPbtTunnelReversionState
  • /iso/org/dod/internet/private/enterprises/1271/cienaCes/cienaCesConfig/cienaCesPbtMIB/cienaCesPbtMIBObjects/cienaCesPbt/cienaCesPbtGlobalAttrs/cienaCesPbtTunnelReversionState
  • /iso/org/dod/internet/private/enterprises/ciena/cienaCes/cienaCesConfig/cienaCesPbtMIB/cienaCesPbtMIBObjects/cienaCesPbt/cienaCesPbtGlobalAttrs/cienaCesPbtTunnelReversionState
  • /iso/org/dod/internet/private/ldap-enterprise/1271/cienaCes/cienaCesConfig/cienaCesPbtMIB/cienaCesPbtMIBObjects/cienaCesPbt/cienaCesPbtGlobalAttrs/cienaCesPbtTunnelReversionState
  • /iso/org/dod/internet/private/ldap-enterprise/ciena/cienaCes/cienaCesConfig/cienaCesPbtMIB/cienaCesPbtMIBObjects/cienaCesPbt/cienaCesPbtGlobalAttrs/cienaCesPbtTunnelReversionState
  • /iso/org/dod/internet/private/vendor-objects/1271/cienaCes/cienaCesConfig/cienaCesPbtMIB/cienaCesPbtMIBObjects/cienaCesPbt/cienaCesPbtGlobalAttrs/cienaCesPbtTunnelReversionState
  • /iso/org/dod/internet/private/vendor-objects/ciena/cienaCes/cienaCesConfig/cienaCesPbtMIB/cienaCesPbtMIBObjects/cienaCesPbt/cienaCesPbtGlobalAttrs/cienaCesPbtTunnelReversionState
  • Additional combinations skipped.

SNMP properties

Value type
CienaGlobalState
Maximum access defined by MIB
read-only
Status in MIB
current
Default value
disabled

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

cienaCesPbtTunnelReversionState OBJECT-TYPE

     SYNTAX      CienaGlobalState  			 

     MAX-ACCESS  read-only

     STATUS      current

     DESCRIPTION

        "Protection of the transport mechanism in PBB-TE is achieved using redundant tunnels. A protected PBB-TE tunnel

         is backed up by a standby PBB-TE tunnel serving the same destination. The former is marked as the primary 

         tunnel and the latter as the backup tunnel. Protection switching in PBB-TE requires both the ingress

         and egress nodes to have matching configurations. Upon the failure of the primary tunnel, traffic is moved 

         over to the backup tunnel at the tunnel ingress. Tunnel reversion signifies the restoration of traffic 

         from this backup tunnel (now active) to the primary (now standby) after the primary tunnel is restored.

         Two common methods are used - automatic and manual. In automatic reversion the traffic is automatically

         reverted back to the primary after it is restored. The manual method, on the other hand, requires the 

         operator to explicitly revert the traffic back to the primary. Manual reversion allows the network 

         operator to perform the task when the impact to the service is minimal and to schedule it. It also prevents 

         flip-flopping between the two tunnels if the primary is not entirely stable. 

         This object indicates whether to enable/disable automatic tunnel reversion from backup to primary if primary 

         comes back up. The device will wait for cienaCesPbtTunnelReversionHoldTime before automatically switching the 
         data traffic back to primary."  

     DEFVAL     {disabled}

     ::= { cienaCesPbtGlobalAttrs 4 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Protection of the transport mechanism in PBB-TE is achieved using redundant tunnels. A protected PBB-TE tunnel is backed up by a standby PBB-TE tunnel serving the same destination. The former is marked as the primary tunnel and the latter as the backup tunnel. Protection switching in PBB-TE requires both the ingress and egress nodes to have matching configurations. Upon the failure of the primary tunnel, traffic is moved over to the backup tunnel at the tunnel ingress. Tunnel reversion signifies the restoration of traffic from this backup tunnel (now active) to the primary (now standby) after the primary tunnel is restored. Two common methods are used - automatic and manual. In automatic reversion the traffic is automatically reverted back to the primary after it is restored. The manual method, on the other hand, requires the operator to explicitly revert the traffic back to the primary. Manual reversion allows the network operator to perform the task when the impact to the service is minimal and to schedule it. It also prevents flip-flopping between the two tunnels if the primary is not entirely stable. This object indicates whether to enable/disable automatic tunnel reversion from backup to primary if primary comes back up. The device will wait for cienaCesPbtTunnelReversionHoldTime before automatically switching the data traffic back to primary.

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 1

cienaCesPbtTunnelReversionState · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: cienaCesPbtTunnelReversionState

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "cienaCesPbtTunnelReversionState",
    "OBJECT-TYPE",
    "SYNTAX",
    "CienaGlobalState",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"Protection of the transport mechanism in PBB-TE is achieved using redundant tunnels. A protected PBB-TE tunnel is backed up by a standby PBB-TE tunnel serving the same destination. The former is marked as the primary tunnel and the latter as the backup tunnel. Protection switching in PBB-TE requires both the ingress and egress nodes to have matching configurations. Upon the failure of the primary tunnel, traffic is moved over to the backup tunnel at the tunnel ingress. Tunnel reversion signifies the restoration of traffic from this backup tunnel (now active) to the primary (now standby) after the primary tunnel is restored. Two common methods are used - automatic and manual. In automatic reversion the traffic is automatically reverted back to the primary after it is restored. The manual method, on the other hand, requires the operator to explicitly revert the traffic back to the primary. Manual reversion allows the network operator to perform the task when the impact to the service is minimal and to schedule it. It also prevents flip-flopping between the two tunnels if the primary is not entirely stable. This object indicates whether to enable/disable automatic tunnel reversion from backup to primary if primary comes back up. The device will wait for cienaCesPbtTunnelReversionHoldTime before automatically switching the data traffic back to primary.\"",
    "DEFVAL",
    "{",
    "disabled",
    "}",
    "::=",
    "{",
    "cienaCesPbtGlobalAttrs",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "row",
      "CienaGlobalState"
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Protection of the transport mechanism in PBB-TE is achieved using redundant tunnels. A protected PBB-TE tunnel is backed up by a standby PBB-TE tunnel serving the same destination. The former is marked as the primary tunnel and the latter as the backup tunnel. Protection switching in PBB-TE requires both the ingress and egress nodes to have matching configurations. Upon the failure of the primary tunnel, traffic is moved over to the backup tunnel at the tunnel ingress. Tunnel reversion signifies the restoration of traffic from this backup tunnel (now active) to the primary (now standby) after the primary tunnel is restored. Two common methods are used - automatic and manual. In automatic reversion the traffic is automatically reverted back to the primary after it is restored. The manual method, on the other hand, requires the operator to explicitly revert the traffic back to the primary. Manual reversion allows the network operator to perform the task when the impact to the service is minimal and to schedule it. It also prevents flip-flopping between the two tunnels if the primary is not entirely stable. This object indicates whether to enable/disable automatic tunnel reversion from backup to primary if primary comes back up. The device will wait for cienaCesPbtTunnelReversionHoldTime before automatically switching the data traffic back to primary."
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      "disabled"
    ]
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.1271)

Jones Wes

Siblings (5)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.1271.2.1.6.1.1.1.1 cienaCesPbtBridgeMac00
1.3.6.1.4.1.1271.2.1.6.1.1.1.2 cienaCesPbtServiceTagEtype00
1.3.6.1.4.1.1271.2.1.6.1.1.1.3 cienaCesPbtTunnelTagEtype00
1.3.6.1.4.1.1271.2.1.6.1.1.1.5 cienaCesPbtTunnelReversionHoldTime00
1.3.6.1.4.1.1271.2.1.6.1.1.1.6 cienaCesPbtTunnelSwitchOverHoldTime00