OID reference

sDot3StatsSQETestErrors

1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.6

Description

A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section 7.2.2.2.4 of ANSI/IEEE 802.3-1985 and its generation is described in section 7.2.4.6 of the same document.

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1 (sDot3StatsEntry)
Node code
6
Node name
sDot3StatsSQETestErrors
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.6
URN notation
urn:oid:1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.6
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 13464 1 2 2 2 9 1 2 1 6}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) admin(13464) dataCom(1) gbn(2) gbnDevice(2) bcmSwapi(2) sRFC1643MIB(9) sRFC1643Dot3(1) sDot3StatsTable(2) sDot3StatsEntry(1) sDot3StatsSQETestErrors(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) admin(13464) datacom(1) gbn(2) gbnDevice(2) bcmSwapi(2) sRFC1643MIB(9) sRFC1643Dot3(1) sDot3StatsTable(2) sDot3StatsEntry(1) sDot3StatsSQETestErrors(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) greentech(13464) dataCom(1) gbn(2) gbnDevice(2) bcmSwapi(2) sRFC1643MIB(9) sRFC1643Dot3(1) sDot3StatsTable(2) sDot3StatsEntry(1) sDot3StatsSQETestErrors(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) greentech(13464) datacom(1) gbn(2) gbnDevice(2) bcmSwapi(2) sRFC1643MIB(9) sRFC1643Dot3(1) sDot3StatsTable(2) sDot3StatsEntry(1) sDot3StatsSQETestErrors(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) admin(13464) dataCom(1) gbn(2) gbnDevice(2) bcmSwapi(2) sRFC1643MIB(9) sRFC1643Dot3(1) sDot3StatsTable(2) sDot3StatsEntry(1) sDot3StatsSQETestErrors(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) admin(13464) datacom(1) gbn(2) gbnDevice(2) bcmSwapi(2) sRFC1643MIB(9) sRFC1643Dot3(1) sDot3StatsTable(2) sDot3StatsEntry(1) sDot3StatsSQETestErrors(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) greentech(13464) dataCom(1) gbn(2) gbnDevice(2) bcmSwapi(2) sRFC1643MIB(9) sRFC1643Dot3(1) sDot3StatsTable(2) sDot3StatsEntry(1) sDot3StatsSQETestErrors(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) greentech(13464) datacom(1) gbn(2) gbnDevice(2) bcmSwapi(2) sRFC1643MIB(9) sRFC1643Dot3(1) sDot3StatsTable(2) sDot3StatsEntry(1) sDot3StatsSQETestErrors(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) admin(13464) dataCom(1) gbn(2) gbnDevice(2) bcmSwapi(2) sRFC1643MIB(9) sRFC1643Dot3(1) sDot3StatsTable(2) sDot3StatsEntry(1) sDot3StatsSQETestErrors(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) admin(13464) datacom(1) gbn(2) gbnDevice(2) bcmSwapi(2) sRFC1643MIB(9) sRFC1643Dot3(1) sDot3StatsTable(2) sDot3StatsEntry(1) sDot3StatsSQETestErrors(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) greentech(13464) dataCom(1) gbn(2) gbnDevice(2) bcmSwapi(2) sRFC1643MIB(9) sRFC1643Dot3(1) sDot3StatsTable(2) sDot3StatsEntry(1) sDot3StatsSQETestErrors(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) greentech(13464) datacom(1) gbn(2) gbnDevice(2) bcmSwapi(2) sRFC1643MIB(9) sRFC1643Dot3(1) sDot3StatsTable(2) sDot3StatsEntry(1) sDot3StatsSQETestErrors(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) admin(13464) dataCom(1) gbn(2) gbnDevice(2) bcmSwapi(2) sRFC1643MIB(9) sRFC1643Dot3(1) sDot3StatsTable(2) sDot3StatsEntry(1) sDot3StatsSQETestErrors(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) admin(13464) datacom(1) gbn(2) gbnDevice(2) bcmSwapi(2) sRFC1643MIB(9) sRFC1643Dot3(1) sDot3StatsTable(2) sDot3StatsEntry(1) sDot3StatsSQETestErrors(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) greentech(13464) dataCom(1) gbn(2) gbnDevice(2) bcmSwapi(2) sRFC1643MIB(9) sRFC1643Dot3(1) sDot3StatsTable(2) sDot3StatsEntry(1) sDot3StatsSQETestErrors(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) greentech(13464) datacom(1) gbn(2) gbnDevice(2) bcmSwapi(2) sRFC1643MIB(9) sRFC1643Dot3(1) sDot3StatsTable(2) sDot3StatsEntry(1) sDot3StatsSQETestErrors(6)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/13464/1/2/2/2/9/1/2/1/6
  • /ISO/Identified-Organization/6/1/4/1/13464/1/2/2/2/9/1/2/1/6
  • /ISO/3/6/1/4/1/13464/1/2/2/2/9/1/2/1/6
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/13464/dataCom/gbn/gbnDevice/bcmSwapi/sRFC1643MIB/sRFC1643Dot3/sDot3StatsTable/sDot3StatsEntry/sDot3StatsSQETestErrors
  • /iso/identified-organization/dod/internet/private/enterprise/13464/datacom/gbn/gbnDevice/bcmSwapi/sRFC1643MIB/sRFC1643Dot3/sDot3StatsTable/sDot3StatsEntry/sDot3StatsSQETestErrors
  • /iso/identified-organization/dod/internet/private/enterprise/admin/dataCom/gbn/gbnDevice/bcmSwapi/sRFC1643MIB/sRFC1643Dot3/sDot3StatsTable/sDot3StatsEntry/sDot3StatsSQETestErrors
  • /iso/identified-organization/dod/internet/private/enterprise/admin/datacom/gbn/gbnDevice/bcmSwapi/sRFC1643MIB/sRFC1643Dot3/sDot3StatsTable/sDot3StatsEntry/sDot3StatsSQETestErrors
  • /iso/identified-organization/dod/internet/private/enterprise/greentech/dataCom/gbn/gbnDevice/bcmSwapi/sRFC1643MIB/sRFC1643Dot3/sDot3StatsTable/sDot3StatsEntry/sDot3StatsSQETestErrors
  • /iso/identified-organization/dod/internet/private/enterprise/greentech/datacom/gbn/gbnDevice/bcmSwapi/sRFC1643MIB/sRFC1643Dot3/sDot3StatsTable/sDot3StatsEntry/sDot3StatsSQETestErrors
  • /iso/identified-organization/dod/internet/private/enterprises/13464/dataCom/gbn/gbnDevice/bcmSwapi/sRFC1643MIB/sRFC1643Dot3/sDot3StatsTable/sDot3StatsEntry/sDot3StatsSQETestErrors
  • /iso/identified-organization/dod/internet/private/enterprises/13464/datacom/gbn/gbnDevice/bcmSwapi/sRFC1643MIB/sRFC1643Dot3/sDot3StatsTable/sDot3StatsEntry/sDot3StatsSQETestErrors
  • /iso/identified-organization/dod/internet/private/enterprises/admin/dataCom/gbn/gbnDevice/bcmSwapi/sRFC1643MIB/sRFC1643Dot3/sDot3StatsTable/sDot3StatsEntry/sDot3StatsSQETestErrors
  • /iso/identified-organization/dod/internet/private/enterprises/admin/datacom/gbn/gbnDevice/bcmSwapi/sRFC1643MIB/sRFC1643Dot3/sDot3StatsTable/sDot3StatsEntry/sDot3StatsSQETestErrors
  • /iso/identified-organization/dod/internet/private/enterprises/greentech/dataCom/gbn/gbnDevice/bcmSwapi/sRFC1643MIB/sRFC1643Dot3/sDot3StatsTable/sDot3StatsEntry/sDot3StatsSQETestErrors
  • /iso/identified-organization/dod/internet/private/enterprises/greentech/datacom/gbn/gbnDevice/bcmSwapi/sRFC1643MIB/sRFC1643Dot3/sDot3StatsTable/sDot3StatsEntry/sDot3StatsSQETestErrors
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/13464/dataCom/gbn/gbnDevice/bcmSwapi/sRFC1643MIB/sRFC1643Dot3/sDot3StatsTable/sDot3StatsEntry/sDot3StatsSQETestErrors
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/13464/datacom/gbn/gbnDevice/bcmSwapi/sRFC1643MIB/sRFC1643Dot3/sDot3StatsTable/sDot3StatsEntry/sDot3StatsSQETestErrors
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/admin/dataCom/gbn/gbnDevice/bcmSwapi/sRFC1643MIB/sRFC1643Dot3/sDot3StatsTable/sDot3StatsEntry/sDot3StatsSQETestErrors
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/admin/datacom/gbn/gbnDevice/bcmSwapi/sRFC1643MIB/sRFC1643Dot3/sDot3StatsTable/sDot3StatsEntry/sDot3StatsSQETestErrors
  • Additional combinations skipped.

SNMP properties

Value type
Counter32
Maximum access defined by MIB
read-only
Status in MIB
current

Interpreting this counter

A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.

Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.

Published counter width: 32 bits. SMIv2: Counter32 · Counter64

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.

In GBNDeviceSWAPI-MIB, the row index sDot3StatsIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.6.<sDot3StatsIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.6

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

sDot3StatsSQETestErrors   OBJECT-TYPE
        SYNTAX     Counter32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
        "A count of times that the SQE TEST ERROR
        message is generated by the PLS sublayer for a
        particular interface. The SQE TEST ERROR
        message is defined in section 7.2.2.2.4 of
        ANSI/IEEE 802.3-1985 and its generation is
        described in section 7.2.4.6 of the same
        document."
        REFERENCE
        "ANSI/IEEE Std 802.3-1985 Carrier Sense
        Multiple Access with Collision Detection Access
        Method and Physical Layer Specifications"
        ::= { sDot3StatsEntry 6 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section 7.2.2.2.4 of ANSI/IEEE 802.3-1985 and its generation is described in section 7.2.4.6 of the same document.

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)FS.COM MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), FS.COM MIB copies (LibreNMS/Observium Community)1 record · 3 sources

Description 1

sDot3StatsSQETestErrors · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), FS.COM MIB copies (LibreNMS/Observium Community)3 sources

Status in source: current.

Names: sDot3StatsSQETestErrors

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "sDot3StatsSQETestErrors",
    "OBJECT-TYPE",
    "SYNTAX",
    "Counter32",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section 7.2.2.2.4 of ANSI/IEEE 802.3-1985 and its generation is described in section 7.2.4.6 of the same document.\"",
    "REFERENCE",
    "\"ANSI/IEEE Std 802.3-1985 Carrier Sense Multiple Access with Collision Detection Access Method and Physical Layer Specifications\"",
    "::=",
    "{",
    "sDot3StatsEntry",
    "6",
    "}"
  ],
  "syntax_tree": [
    [
      "ApplicationSyntax",
      "Counter32"
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section 7.2.2.2.4 of ANSI/IEEE 802.3-1985 and its generation is described in section 7.2.4.6 of the same document."
    ],
    [
      "REFERENCE",
      "ANSI/IEEE Std 802.3-1985 Carrier Sense Multiple Access with Collision Detection Access Method and Physical Layer Specifications"
    ],
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.13464)

Ke Qin

Siblings (15)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.1 sDot3StatsIndex00
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.2 sDot3StatsAlignmentErrors00
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.3 sDot3StatsFCSErrors00
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.4 sDot3StatsSingleCollisionFrames00
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.5 sDot3StatsMultipleCollisionFrames00
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.7 sDot3StatsDeferredTransmissions00
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.8 sDot3StatsLateCollisions00
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.9 sDot3StatsExcessiveCollisions00
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.10 sDot3StatsInternalMacTransmitErrors00
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.11 sDot3StatsCarrierSenseErrors00
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.13 sDot3StatsFrameTooLongs00
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.16 sDot3StatsInternalMacReceiveErrors00
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.17 sDot3StatsEtherChipSet00
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.18 sDot3StatsSymbolErrors00
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.19 sDot3StatsDuplexStatus00