Description 1
Original text from OID Repository
SYNTAX MilliAmps
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the lower critical current
threshold for the inlet. This value is
reported in milliamps (1/1000th of an amp)"
OID reference
1.3.6.1.4.1.13742.4.1.20.2.1.23
The value of the lower critical current threshold for the inlet. This value is reported in milliamps (1/1000th of an amp)
Identification
{1 3 6 1 4 1 13742 4 1 20 2 1 23}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
inletCurrentLowerCritical OBJECT-TYPE
SYNTAX MilliAmps
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the lower critical current
threshold for the inlet. This value is
reported in milliamps (1/1000th of an amp).
This OID is valid for inline meter PDU's only."
::= { inletEntry 23 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Description 2
The value of the lower critical current threshold for the inlet. This value is reported in milliamps (1/1000th of an amp). This OID is valid for inline meter PDU's only.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: inletCurrentLowerCritical
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"inletCurrentLowerCritical",
"OBJECT-TYPE",
"SYNTAX",
"MilliAmps",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The value of the lower critical current threshold for the inlet. This value is reported in milliamps (1/1000th of an amp). This OID is valid for inline meter PDU's only.\"",
"::=",
"{",
"inletEntry",
"23",
"}"
],
"syntax_tree": [
[
"row",
"MilliAmps"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The value of the lower critical current threshold for the inlet. This value is reported in milliamps (1/1000th of an amp). This OID is valid for inline meter PDU's only."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: PDU-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'MacAddress', 'DateAndTime', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises', 'Integer32', 'Unsigned32', 'IpAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType']}Related source files and packages:
Same file in Observium Community.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.13742.4.1.20.2.1.1 | inletIndex | 0 | 0 | A unique value for each inlet. Its value ranges between 1 and the value of inletCount. |
| 1.3.6.1.4.1.13742.4.1.20.2.1.3 | inletPoleCount | 0 | 0 | The number of poles for an inlet (1 for single phase, 3 for 3 phase Delta-wired, 4 for 3 phase WYE wired). |
| 1.3.6.1.4.1.13742.4.1.20.2.1.4 | inletCurrentRating | 0 | 0 | The input current Rating |
| 1.3.6.1.4.1.13742.4.1.20.2.1.7 | inletCurrent | 0 | 0 | A unique value for the current sensor attached to the inlet. This value is reported in milliamps (1/1000th of an amp) |
| 1.3.6.1.4.1.13742.4.1.20.2.1.8 | inletVoltage | 0 | 0 | A unique value for the voltage sensor attached to the intlet.This value is reported in millivolts (1/1000th of a volt) |
| 1.3.6.1.4.1.13742.4.1.20.2.1.9 | inletActivePower | 0 | 0 | The active power for the inlet This value is reported in Watts. |
| 1.3.6.1.4.1.13742.4.1.20.2.1.10 | inletApparentPower | 0 | 0 | The apparent power for the inlet. This value is reported in Volt-Amps |
| 1.3.6.1.4.1.13742.4.1.20.2.1.11 | inletPowerFactor | 0 | 0 | A unique value for the power factor of the inlet. The reading represents a percentage in the range of 0% to 100%. |
| 1.3.6.1.4.1.13742.4.1.20.2.1.12 | inletActiveEnergy | 0 | 0 | The value of the cumulative active energy for this inlet. This value is reported in WattHours |
| 1.3.6.1.4.1.13742.4.1.20.2.1.15 | inletCurrentUnbalance | 0 | 0 | A string displaying the current unbalance in percent. It will have the value NA if the feature is disabled, the PX is not a 3-p… |
| 1.3.6.1.4.1.13742.4.1.20.2.1.20 | inletCurrentUpperWarning | 0 | 0 | The value of the upper warning (non-critical) current threshold for the inlet. This value is reported in milliamps (1/1000th of… |
| 1.3.6.1.4.1.13742.4.1.20.2.1.21 | inletCurrentUpperCritical | 0 | 0 | The value of the upper critical current threshold for the inlet. This value is reported in milliamps (1/1000th of an amp) |
| 1.3.6.1.4.1.13742.4.1.20.2.1.22 | inletCurrentLowerWarning | 0 | 0 | The value of the lower warning (non-critical) current threshold for the inlet. This value is reported in milliamps (1/1000th of… |
| 1.3.6.1.4.1.13742.4.1.20.2.1.24 | inletVoltageUpperWarning | 0 | 0 | The value of the upper warning (non-critical) current threshold for the inlet. This value is reported in millivolts (1/1000th o… |
| 1.3.6.1.4.1.13742.4.1.20.2.1.25 | inletVoltageUpperCritical | 0 | 0 | The value of the upper critical current threshold for the inlet. This value is reported in millivolts (1/1000th of an amp) |
| 1.3.6.1.4.1.13742.4.1.20.2.1.26 | inletVoltageLowerWarning | 0 | 0 | The value of the lower warning (non-critical) current threshold for the inlet. This value is reported in millivolts (1/1000th o… |
| 1.3.6.1.4.1.13742.4.1.20.2.1.27 | inletVoltageLowerCritical | 0 | 0 | The value of the lower critical current threshold for the inlet. This value is reported in millivolts (1/1000th of an amp) |
| 1.3.6.1.4.1.13742.4.1.20.2.1.28 | inletCurrentUnbalanceUpperCritical | 0 | 0 | The value of the upper critical current Unbalance threshold. |
| 1.3.6.1.4.1.13742.4.1.20.2.1.29 | inletCurrentUnbalanceUpperWarning | 0 | 0 | The value of the upper warning current Unbalance threshold. |
| 1.3.6.1.4.1.13742.4.1.20.2.1.30 | inletCurrentHysteresis | 0 | 0 | The hysteresis used for deassertions |
| 1.3.6.1.4.1.13742.4.1.20.2.1.31 | inletVoltageHysteresis | 0 | 0 | The hysteresis used for deassertions |
| 1.3.6.1.4.1.13742.4.1.20.2.1.32 | inletCurrentUnbalanceHysteresis | 0 | 0 |