OID reference
1.3.6.1.4.1.1411.102.77.1.5
Enable/disable cisco like privilege level mapping. By default privilege level mapping is disabled.Privilege level mapping is 0 = CLI_AUTH_USER 3 = CLI_AUTH_OPER 6 = CLI_AUTH_ADMIN After enabling privilege level mapping,privilege levels are 0 - 1 = CLI_AUTH_USER 6 - 8 = CLI_AUTH_OPER 14 - 15 = CLI_AUTH_ADMIN
Identification
{1 3 6 1 4 1 1411 102 77 1 5}
| Value | Name |
|---|---|
| 0 | disabled |
| 1 | enabled |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.1411.102.77.1.5.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
bosTacClntPrivLevelMap OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable cisco like privilege level mapping. By default privilege
level mapping is disabled.Privilege level mapping is
0 = CLI_AUTH_USER
3 = CLI_AUTH_OPER
6 = CLI_AUTH_ADMIN
After enabling privilege level mapping,privilege levels are
0 - 1 = CLI_AUTH_USER
6 - 8 = CLI_AUTH_OPER
14 - 15 = CLI_AUTH_ADMIN"
::= {bosTacacsClientScalarGroup 5}
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Enable/disable cisco like privilege level mapping. By default privilege level mapping is disabled.Privilege level mapping is 0 = CLI_AUTH_USER 3 = CLI_AUTH_OPER 6 = CLI_AUTH_ADMIN After enabling privilege level mapping,privilege levels are 0 - 1 = CLI_AUTH_USER 6 - 8 = CLI_AUTH_OPER 14 - 15 = CLI_AUTH_ADMIN
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: bosTacClntPrivLevelMap
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"bosTacClntPrivLevelMap",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"disabled",
"(",
"0",
")",
",",
"enabled",
"(",
"1",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Enable/disable cisco like privilege level mapping. By default privilege level mapping is disabled.Privilege level mapping is 0 = CLI_AUTH_USER 3 = CLI_AUTH_OPER 6 = CLI_AUTH_ADMIN After enabling privilege level mapping,privilege levels are 0 - 1 = CLI_AUTH_USER 6 - 8 = CLI_AUTH_OPER 14 - 15 = CLI_AUTH_ADMIN\"",
"::=",
"{",
"bosTacacsClientScalarGroup",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"disabled",
0
],
[
"enabled",
1
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Enable/disable cisco like privilege level mapping. By default privilege level mapping is disabled.Privilege level mapping is 0 = CLI_AUTH_USER 3 = CLI_AUTH_OPER 6 = CLI_AUTH_ADMIN After enabling privilege level mapping,privilege levels are 0 - 1 = CLI_AUTH_USER 6 - 8 = CLI_AUTH_OPER 14 - 15 = CLI_AUTH_ADMIN"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: EX2500-BASE-MIB
See published definition above
{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'DisplayString', 'PhysAddress', 'MacAddress', 'RowStatus', 'TimeInterval', 'TimeStamp'], 'BRIDGE-MIB': ['BridgeId', 'dot1dTp', 'dot1dTpPort', 'dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'enterprises', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'TimeTicks', 'IpAddress', 'mib-2'], 'RFC1213-MIB': ['sysName', 'sysLocation', 'sysContact', 'ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpMessageProcessingModel', 'SnmpSecurityModel', 'SnmpSecurityLevel'], 'SNMP-USER-BASED-SM-MIB': ['usmNoAuthProtocol', 'usmNoPrivProtocol']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1411.102.77.1.1 | bosTacClntActiveServer | 0 | 0 | |
| 1.3.6.1.4.1.1411.102.77.1.2 | bosTacClntTraceLevel | 0 | 0 | |
| 1.3.6.1.4.1.1411.102.77.1.3 | bosTacClntRetransmit | 0 | 0 | |
| 1.3.6.1.4.1.1411.102.77.1.4 | bosTacClntStatisticsGroup | 30 | 30 | |
| 1.3.6.1.4.1.1411.102.77.1.6 | bosTacClntSecureBackdoorStatus | 0 | 0 | |
| 1.3.6.1.4.1.1411.102.77.1.7 | bosTacClntServerEnabled | 0 | 0 |