OID reference
1.3.6.1.4.1.1411.102.81.1.46
This object is for enabling or disabling the TELNET access to the system. Set operation of enable will move this object to the enableInProgress first and then to the enable state on successful transition. Otherwise it will move back to the old state. Same applies to the disable also. enableInProgress and disableInProg…
Identification
{1 3 6 1 4 1 1411 102 81 1 46}
| Value | Name |
|---|---|
| 1 | enable |
| 2 | disable |
| 3 | enableInProgress |
| 4 | disableInProgress |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.1411.102.81.1.46.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
bosTelnetStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2),
enableInProgress(3),
disableInProgress(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling the TELNET access to the
system. Set operation of enable will move this object to the
enableInProgress first and then to the enable state on successful
transition. Otherwise it will move back to the old state. Same applies
to the disable also.
enableInProgress and disableInProgres are not admin configurable values."
DEFVAL { enable }
::= { bosSystem 46 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This object is for enabling or disabling the TELNET access to the system. Set operation of enable will move this object to the enableInProgress first and then to the enable state on successful transition. Otherwise it will move back to the old state. Same applies to the disable also. enableInProgress and disableInProgres are not admin configurable values.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: bosTelnetStatus
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"bosTelnetStatus",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enable",
"(",
"1",
")",
",",
"disable",
"(",
"2",
")",
",",
"enableInProgress",
"(",
"3",
")",
",",
"disableInProgress",
"(",
"4",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object is for enabling or disabling the TELNET access to the system. Set operation of enable will move this object to the enableInProgress first and then to the enable state on successful transition. Otherwise it will move back to the old state. Same applies to the disable also. enableInProgress and disableInProgres are not admin configurable values.\"",
"DEFVAL",
"{",
"enable",
"}",
"::=",
"{",
"bosSystem",
"46",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enable",
1
],
[
"disable",
2
],
[
"enableInProgress",
3
],
[
"disableInProgress",
4
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object is for enabling or disabling the TELNET access to the system. Set operation of enable will move this object to the enableInProgress first and then to the enable state on successful transition. Otherwise it will move back to the old state. Same applies to the disable also. enableInProgress and disableInProgres are not admin configurable values."
],
null,
null,
null,
[
"DEFVAL",
"enable"
]
]
}Vendor MIB copy from the Observium Community archive.
Module: EX2500-BASE-MIB
See published definition above
{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'DisplayString', 'PhysAddress', 'MacAddress', 'RowStatus', 'TimeInterval', 'TimeStamp'], 'BRIDGE-MIB': ['BridgeId', 'dot1dTp', 'dot1dTpPort', 'dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'enterprises', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'TimeTicks', 'IpAddress', 'mib-2'], 'RFC1213-MIB': ['sysName', 'sysLocation', 'sysContact', 'ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpMessageProcessingModel', 'SnmpSecurityModel', 'SnmpSecurityLevel'], 'SNMP-USER-BASED-SM-MIB': ['usmNoAuthProtocol', 'usmNoPrivProtocol']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1411.102.81.1.2 | bosHardwareVersion | 0 | 0 | |
| 1.3.6.1.4.1.1411.102.81.1.10 | bosConfigSaveOption | 0 | 0 | |
| 1.3.6.1.4.1.1411.102.81.1.12 | bosConfigSaveFileName | 0 | 0 | |
| 1.3.6.1.4.1.1411.102.81.1.14 | bosConfigSaveStatus | 0 | 0 | |
| 1.3.6.1.4.1.1411.102.81.1.15 | bosConfigRestoreOption | 0 | 0 | |
| 1.3.6.1.4.1.1411.102.81.1.19 | bosConfigRestoreStatus | 0 | 0 | |
| 1.3.6.1.4.1.1411.102.81.1.26 | bosLoggingOption | 0 | 0 | |
| 1.3.6.1.4.1.1411.102.81.1.32 | bosLoginAuthentication | 0 | 0 | |
| 1.3.6.1.4.1.1411.102.81.1.35 | bosSwitchDate | 0 | 0 | |
| 1.3.6.1.4.1.1411.102.81.1.39 | bosHttpStatus | 0 | 0 | |
| 1.3.6.1.4.1.1411.102.81.1.40 | bosConfigRestoreFileVersion | 0 | 0 | |
| 1.3.6.1.4.1.1411.102.81.1.47 | bosTimeZone | 0 | 0 | |
| 1.3.6.1.4.1.1411.102.81.1.48 | bosDayLightSaving | 0 | 0 | |
| 1.3.6.1.4.1.1411.102.81.1.49 | bosLastBootTime | 0 | 0 | |
| 1.3.6.1.4.1.1411.102.81.1.50 | bosAllocCount | 0 | 0 | |
| 1.3.6.1.4.1.1411.102.81.1.51 | bosReleaseCount | 0 | 0 | |
| 1.3.6.1.4.1.1411.102.81.1.52 | bosAllocFailCount | 0 | 0 | |
| 1.3.6.1.4.1.1411.102.81.1.53 | bosPeakUsageCount | 0 | 0 |