| 1.3.6.1.4.1.14179.1.2.12.1.1 |
agentPortDot1dBasePort | 0 | 0 |
The port number of this port. |
| 1.3.6.1.4.1.14179.1.2.12.1.2 |
agentPortIfIndex | 0 | 0 |
The switch's Port IfIndex |
| 1.3.6.1.4.1.14179.1.2.12.1.3 |
agentPortIanaType | 0 | 0 |
The switch's Port Type |
| 1.3.6.1.4.1.14179.1.2.12.1.4 |
agentPortSTPMode | 0 | 0 |
The switch's Port Spanning Tree Protocol Mode STP mode values are: dot1d (the default) fast, indicates you want to use the fast spa… |
| 1.3.6.1.4.1.14179.1.2.12.1.5 |
agentPortSTPState | 0 | 0 |
The switch's Port Spanning Tree Protocol State |
| 1.3.6.1.4.1.14179.1.2.12.1.6 |
agentPortAdminMode | 0 | 0 |
The switch's Port Admin Mode |
| 1.3.6.1.4.1.14179.1.2.12.1.7 |
agentPortPhysicalMode | 0 | 0 |
The switch's Port Speed Mode. This is the configured physical mode.This object is read-only for gigabit ports |
| 1.3.6.1.4.1.14179.1.2.12.1.8 |
agentPortPhysicalStatus | 0 | 0 |
The switch's Port Physical Speed Status.This is the current actual speed. |
| 1.3.6.1.4.1.14179.1.2.12.1.9 |
agentPortLinkTrapMode | 0 | 0 |
If enabled, link up and link down traps will be sent for this port. |
| 1.3.6.1.4.1.14179.1.2.12.1.10 |
agentPortClearStats | 0 | 0 |
Clear stats for this port only |
| 1.3.6.1.4.1.14179.1.2.12.1.11 |
agentPortDefaultType | 0 | 0 |
This object identifies the default administrative port type, to be used in conjunction with the operational port type denoted by … |
| 1.3.6.1.4.1.14179.1.2.12.1.12 |
agentPortType | 0 | 0 |
|
| 1.3.6.1.4.1.14179.1.2.12.1.13 |
agentPortAutoNegAdminStatus | 0 | 0 |
This object identifies the administration status of auto negotiation for this port. |
| 1.3.6.1.4.1.14179.1.2.12.1.14 |
agentPortDot3FlowControlMode | 0 | 0 |
Config flowcontrol allows you to enable or disable 802.3x flow control for this port. This value applies to only full-duplex mode… |
| 1.3.6.1.4.1.14179.1.2.12.1.15 |
agentPortPowerMode | 0 | 0 |
Enable/Disable the port's Power over ethernet. This doesn't apply to appliances that have no POE controller. |
| 1.3.6.1.4.1.14179.1.2.12.1.16 |
agentPortGvrpStatus | 0 | 0 |
The state of GVRP operation on this port. The value enabled(1) indicates that GVRP is enabled on this port, as long as dot1qGvrp… |
| 1.3.6.1.4.1.14179.1.2.12.1.17 |
agentPortGarpJoinTime | 0 | 0 |
The GARP Join time, in centiseconds.(Attribute no longer supported) |
| 1.3.6.1.4.1.14179.1.2.12.1.18 |
agentPortGarpLeaveTime | 0 | 0 |
The GARP Leave time, in centiseconds.(Attribute no longer supported) |
| 1.3.6.1.4.1.14179.1.2.12.1.19 |
agentPortGarpLeaveAllTime | 0 | 0 |
The GARP LeaveAll time, in centiseconds.(Attribute no longer supported) |
| 1.3.6.1.4.1.14179.1.2.12.1.20 |
agentPortMirrorMode | 0 | 0 |
The switch's Port Mirror Mode. If enabled, then this is the port that the packets are mirrored to. |
| 1.3.6.1.4.1.14179.1.2.12.1.21 |
agentPortMulticastApplianceMode | 0 | 0 |
The Port Multicast Appliance Mode. If enabled, then this port allows multicast streams through it. At a time, a maximum of four p… |
| 1.3.6.1.4.1.14179.1.2.12.1.40 |
agentPortOperationalStatus | 0 | 0 |
The current operational state of the port. |