OID reference

agentSnmpMultipleUsersTrapFlag

1.3.6.1.4.1.14179.1.2.5.7.3

Description

Multiple Users Flag - Enable/Disable Multiple User traps. When the value is set to Enable, a Multiple User Trap is sent whenever someone logs in to the terminal interface (EIA 232 or Telnet) and there is already an existing terminal interface session

Full description and source information

Identification

Identifier and names

Parent: 1.3.6.1.4.1.14179.1.2.5.7 (agentSnmpTrapFlagsConfigGroup)
Node code: 3
Node name: agentSnmpMultipleUsersTrapFlag
Category: SNMP management object
Numeric OID: 1.3.6.1.4.1.14179.1.2.5.7.3
URN notation: urn:oid:1.3.6.1.4.1.14179.1.2.5.7.3
Type: OBJECT-TYPE

ASN.1, OID-IRI and named path variants

ASN.1 notation

{1 3 6 1 4 1 14179 1 2 5 7 3}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) airespace(14179) bsnSwitching(1) agentConfigGroup(2) agentSnmpConfigGroup(5) agentSnmpTrapFlagsConfigGroup(7) agentSnmpMultipleUsersTrapFlag(3)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) airespace(14179) bsnSwitching(1) agentConfigGroup(2) agentSnmpConfigGroup(5) agentSnmpTrapFlagsConfigGroup(7) agentSnmpMultipleUsersTrapFlag(3)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) airespace(14179) bsnSwitching(1) agentConfigGroup(2) agentSnmpConfigGroup(5) agentSnmpTrapFlagsConfigGroup(7) agentSnmpMultipleUsersTrapFlag(3)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) airespace(14179) bsnSwitching(1) agentConfigGroup(2) agentSnmpConfigGroup(5) agentSnmpTrapFlagsConfigGroup(7) agentSnmpMultipleUsersTrapFlag(3)}
{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) airespace(14179) bsnSwitching(1) agentConfigGroup(2) agentSnmpConfigGroup(5) agentSnmpTrapFlagsConfigGroup(7) agentSnmpMultipleUsersTrapFlag(3)}
{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) airespace(14179) bsnSwitching(1) agentConfigGroup(2) agentSnmpConfigGroup(5) agentSnmpTrapFlagsConfigGroup(7) agentSnmpMultipleUsersTrapFlag(3)}
{iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) airespace(14179) bsnSwitching(1) agentConfigGroup(2) agentSnmpConfigGroup(5) agentSnmpTrapFlagsConfigGroup(7) agentSnmpMultipleUsersTrapFlag(3)}
{iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) airespace(14179) bsnSwitching(1) agentConfigGroup(2) agentSnmpConfigGroup(5) agentSnmpTrapFlagsConfigGroup(7) agentSnmpMultipleUsersTrapFlag(3)}
{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) airespace(14179) bsnSwitching(1) agentConfigGroup(2) agentSnmpConfigGroup(5) agentSnmpTrapFlagsConfigGroup(7) agentSnmpMultipleUsersTrapFlag(3)}
{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) airespace(14179) bsnSwitching(1) agentConfigGroup(2) agentSnmpConfigGroup(5) agentSnmpTrapFlagsConfigGroup(7) agentSnmpMultipleUsersTrapFlag(3)}
{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) airespace(14179) bsnSwitching(1) agentConfigGroup(2) agentSnmpConfigGroup(5) agentSnmpTrapFlagsConfigGroup(7) agentSnmpMultipleUsersTrapFlag(3)}
{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) airespace(14179) bsnSwitching(1) agentConfigGroup(2) agentSnmpConfigGroup(5) agentSnmpTrapFlagsConfigGroup(7) agentSnmpMultipleUsersTrapFlag(3)}
{iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) airespace(14179) bsnSwitching(1) agentConfigGroup(2) agentSnmpConfigGroup(5) agentSnmpTrapFlagsConfigGroup(7) agentSnmpMultipleUsersTrapFlag(3)}
{iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) airespace(14179) bsnSwitching(1) agentConfigGroup(2) agentSnmpConfigGroup(5) agentSnmpTrapFlagsConfigGroup(7) agentSnmpMultipleUsersTrapFlag(3)}
{iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) airespace(14179) bsnSwitching(1) agentConfigGroup(2) agentSnmpConfigGroup(5) agentSnmpTrapFlagsConfigGroup(7) agentSnmpMultipleUsersTrapFlag(3)}
{iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) airespace(14179) bsnSwitching(1) agentConfigGroup(2) agentSnmpConfigGroup(5) agentSnmpTrapFlagsConfigGroup(7) agentSnmpMultipleUsersTrapFlag(3)}

OID-IRI notation

/1/3/6/1/4/1/14179/1/2/5/7/3
/ISO/Identified-Organization/6/1/4/1/14179/1/2/5/7/3
/ISO/3/6/1/4/1/14179/1/2/5/7/3

Named path variants

/iso/identified-organization/dod/internet/private/enterprise/airespace/bsnSwitching/agentConfigGroup/agentSnmpConfigGroup/agentSnmpTrapFlagsConfigGroup/agentSnmpMultipleUsersTrapFlag
/iso/identified-organization/dod/internet/private/enterprises/airespace/bsnSwitching/agentConfigGroup/agentSnmpConfigGroup/agentSnmpTrapFlagsConfigGroup/agentSnmpMultipleUsersTrapFlag
/iso/identified-organization/dod/internet/private/ldap-enterprise/airespace/bsnSwitching/agentConfigGroup/agentSnmpConfigGroup/agentSnmpTrapFlagsConfigGroup/agentSnmpMultipleUsersTrapFlag
/iso/identified-organization/dod/internet/private/vendor-objects/airespace/bsnSwitching/agentConfigGroup/agentSnmpConfigGroup/agentSnmpTrapFlagsConfigGroup/agentSnmpMultipleUsersTrapFlag
/iso/org/dod/internet/private/enterprise/airespace/bsnSwitching/agentConfigGroup/agentSnmpConfigGroup/agentSnmpTrapFlagsConfigGroup/agentSnmpMultipleUsersTrapFlag
/iso/org/dod/internet/private/enterprises/airespace/bsnSwitching/agentConfigGroup/agentSnmpConfigGroup/agentSnmpTrapFlagsConfigGroup/agentSnmpMultipleUsersTrapFlag
/iso/org/dod/internet/private/ldap-enterprise/airespace/bsnSwitching/agentConfigGroup/agentSnmpConfigGroup/agentSnmpTrapFlagsConfigGroup/agentSnmpMultipleUsersTrapFlag
/iso/org/dod/internet/private/vendor-objects/airespace/bsnSwitching/agentConfigGroup/agentSnmpConfigGroup/agentSnmpTrapFlagsConfigGroup/agentSnmpMultipleUsersTrapFlag
/iso/iso-identified-organization/dod/internet/private/enterprise/airespace/bsnSwitching/agentConfigGroup/agentSnmpConfigGroup/agentSnmpTrapFlagsConfigGroup/agentSnmpMultipleUsersTrapFlag
/iso/iso-identified-organization/dod/internet/private/enterprises/airespace/bsnSwitching/agentConfigGroup/agentSnmpConfigGroup/agentSnmpTrapFlagsConfigGroup/agentSnmpMultipleUsersTrapFlag
/iso/iso-identified-organization/dod/internet/private/ldap-enterprise/airespace/bsnSwitching/agentConfigGroup/agentSnmpConfigGroup/agentSnmpTrapFlagsConfigGroup/agentSnmpMultipleUsersTrapFlag
/iso/iso-identified-organization/dod/internet/private/vendor-objects/airespace/bsnSwitching/agentConfigGroup/agentSnmpConfigGroup/agentSnmpTrapFlagsConfigGroup/agentSnmpMultipleUsersTrapFlag
/iso/iso-organization/dod/internet/private/enterprise/airespace/bsnSwitching/agentConfigGroup/agentSnmpConfigGroup/agentSnmpTrapFlagsConfigGroup/agentSnmpMultipleUsersTrapFlag
/iso/iso-organization/dod/internet/private/enterprises/airespace/bsnSwitching/agentConfigGroup/agentSnmpConfigGroup/agentSnmpTrapFlagsConfigGroup/agentSnmpMultipleUsersTrapFlag
/iso/iso-organization/dod/internet/private/ldap-enterprise/airespace/bsnSwitching/agentConfigGroup/agentSnmpConfigGroup/agentSnmpTrapFlagsConfigGroup/agentSnmpMultipleUsersTrapFlag
/iso/iso-organization/dod/internet/private/vendor-objects/airespace/bsnSwitching/agentConfigGroup/agentSnmpConfigGroup/agentSnmpTrapFlagsConfigGroup/agentSnmpMultipleUsersTrapFlag

SNMP properties

Value type: INTEGER
Maximum access defined by MIB: read-write
Status in MIB: current, mandatory

Definitions may combine these properties differently.

Compare 2 source variants

Variant 1 — Cisco, MIBdepot, and others

Value type: INTEGER
Maximum access defined by MIB: read-write
Status in MIB: current

Variant 2 — Cisco SMIv1

Value type: INTEGER
Maximum access defined by MIB: read-write
Status in MIB: mandatory

Enumerated values

Numbers refer to source variants above. Each value is shown only for variants that define it.

Value	Name	Source variants
1	enable	1, 2
2	disable	1, 2

Using this OID with SNMP

At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.

snmpget [connection options] DEVICE .1.3.6.1.4.1.14179.1.2.5.7.3.0

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Multiple Users Flag - Enable/Disable Multiple
User traps. When the value is set to Enable, a
Multiple User Trap is sent whenever someone logs
in to the terminal interface (EIA 232 or Telnet)
and there is already an existing terminal
interface session

Sources for this description

Circitor

Parsed from AIRESPACE-SWITCHING-MIB.mib · AIRESPACE-SWITCHING-MIB

Source file: Download AIRESPACE-SWITCHING-MIB.mib

Browse all files from Circitor

Cisco

Source file: Download AIRESPACE-SWITCHING-MIB.my · Publisher's file

Vendor MIB copy from the Netdisco archive.

Related source files and packages:

Source file: Download AIRESPACE-SWITCHING-MIB · Publisher's file

Vendor MIB copy from the Observium Community archive. Cisco support.

Related source files and packages:

Observium Community original distribution archive

Source file: Download AIRESPACE-SWITCHING-MIB · Publisher's file

Vendor MIB copy from the LibreNMS archive. Cisco support.

Related source files and packages:

Source file: Download AIRESPACE-SWITCHING-MIB.my · Publisher's file

Browse all files from Cisco

Cisco SMIv1

Source file: Download AIRESPACE-SWITCHING-MIB-V1SMI.my · Publisher's file

Source file: Download AIRESPACE-SWITCHING-MIB-V1SMI.my.txt

Browse all files from Cisco SMIv1

MIBdepot

Source file: Download AIRESPACE-SWITCHING-MIB.my.txt

Browse all files from MIBdepot

Historical records

Additional source information

Information from Circitor

agentSnmpMultipleUsersTrapFlag OBJECT-TYPE
         SYNTAX      INTEGER {
                     enable(1),
                     disable(2)
                  }
         MAX-ACCESS  read-write
         STATUS      current
         DESCRIPTION
                     "Multiple Users Flag - Enable/Disable Multiple
                     User traps. When the value is set to Enable, a
                     Multiple User Trap is sent whenever someone logs
                     in to the terminal interface (EIA 232 or Telnet)
                     and there is already an existing terminal
                     interface session"
         ::= { agentSnmpTrapFlagsConfigGroup 3 }

Information from Cisco SMIv1

agentSnmpMultipleUsersTrapFlag OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Multiple Users Flag - Enable/Disable Multiple
        User traps. When the value is set to Enable, a
        Multiple User Trap is sent whenever someone logs
        in to the terminal interface (EIA 232 or Telnet)
        and there is already an existing terminal
        interface session"
    ::= { agentSnmpTrapFlagsConfigGroup 3 }

Information from OID Repository

Vendor: Airespace, Inc (formerly Black Storm Networks)
Module: AIRESPACE-SWITCHING-MIB

[Automatically extracted from oidview.com]

Information from MIBdepot

agentSnmpMultipleUsersTrapFlag OBJECT-TYPE
         SYNTAX      INTEGER {
                     enable(1),
                     disable(2)
                  }
         MAX-ACCESS  read-write
         STATUS      current
         DESCRIPTION
                     "Multiple Users Flag - Enable/Disable Multiple
                     User traps. When the value is set to Enable, a
                     Multiple User Trap is sent whenever someone logs
                     in to the terminal interface (EIA 232 or Telnet)
                     and there is already an existing terminal
                     interface session"
         ::= { agentSnmpTrapFlagsConfigGroup 3 }

Information from Cisco

agentSnmpMultipleUsersTrapFlag OBJECT-TYPE
         SYNTAX      INTEGER {
                     enable(1),
                     disable(2)
                  }
         MAX-ACCESS  read-write
         STATUS      current
         DESCRIPTION
                     "Multiple Users Flag - Enable/Disable Multiple
                     User traps. When the value is set to Enable, a
                     Multiple User Trap is sent whenever someone logs
                     in to the terminal interface (EIA 232 or Telnet)
                     and there is already an existing terminal
                     interface session"
         ::= { agentSnmpTrapFlagsConfigGroup 3 }

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.14179)

Bhautik Doshi

Direct children (1)

OID	Name	Direct children	Descendants	Description
1.3.6.1.4.1.14179.1.2.5.7.3.0	agentSnmpMultipleUsersTrapFlag	0	0

Siblings (4)

OID	Name	Direct children	Descendants	Description
1.3.6.1.4.1.14179.1.2.5.7.1	agentSnmpAuthenticationTrapFlag	1	1	Authentication Flag - Enable/Disable authentication Flag.
1.3.6.1.4.1.14179.1.2.5.7.2	agentSnmpLinkUpDownTrapFlag	1	1	Link Up/Down Flag - Enable/Disable Link Up/Link Down traps for the entire switch. When set to Enable, the Link Up/Down traps will…
1.3.6.1.4.1.14179.1.2.5.7.4	agentSnmpSpanningTreeTrapFlag	1	1	Spanning Tree Flag - This flag enables the sending of new root traps and topology change notification traps.
1.3.6.1.4.1.14179.1.2.5.7.5	agentSnmpBroadcastStormTrapFlag	1	1	Broadcast Storm Flag - This flag enables or disables the broadcast storm trap. You must also enable Broadcast Storm Recovery Mode …