OID reference

saPUFScanOnNextBoot

1.3.6.1.4.1.1429.77.1.10.1.1.6

Description

Setting an index of this object to set(1) causes the modem to scan for the frequency stored in saPUFFrequency.x on the next reboot and record the results to non-vol. After the reboot and data is recorded, the index of this object is reset back to unset(0) . Conditions to run a scan on Next boot: - saPUFScanOnNextBoot.…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.1429.77.1.10.1.1 (saPUFEntry)
Node code
6
Node name
saPUFScanOnNextBoot
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.1429.77.1.10.1.1.6
URN notation
urn:oid:1.3.6.1.4.1.1429.77.1.10.1.1.6
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 1429 77 1 10 1 1 6}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) ciscoSPVTG(1429) saCmMib(77) dpxCmMibObjects(1) saPUF(10) saPUFTable(1) saPUFEntry(1) saPUFScanOnNextBoot(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) sa(1429) saCmMib(77) dpxCmMibObjects(1) saPUF(10) saPUFTable(1) saPUFEntry(1) saPUFScanOnNextBoot(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) ciscoSPVTG(1429) saCmMib(77) dpxCmMibObjects(1) saPUF(10) saPUFTable(1) saPUFEntry(1) saPUFScanOnNextBoot(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) sa(1429) saCmMib(77) dpxCmMibObjects(1) saPUF(10) saPUFTable(1) saPUFEntry(1) saPUFScanOnNextBoot(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) ciscoSPVTG(1429) saCmMib(77) dpxCmMibObjects(1) saPUF(10) saPUFTable(1) saPUFEntry(1) saPUFScanOnNextBoot(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) sa(1429) saCmMib(77) dpxCmMibObjects(1) saPUF(10) saPUFTable(1) saPUFEntry(1) saPUFScanOnNextBoot(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) ciscoSPVTG(1429) saCmMib(77) dpxCmMibObjects(1) saPUF(10) saPUFTable(1) saPUFEntry(1) saPUFScanOnNextBoot(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) sa(1429) saCmMib(77) dpxCmMibObjects(1) saPUF(10) saPUFTable(1) saPUFEntry(1) saPUFScanOnNextBoot(6)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) ciscoSPVTG(1429) saCmMib(77) dpxCmMibObjects(1) saPUF(10) saPUFTable(1) saPUFEntry(1) saPUFScanOnNextBoot(6)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) sa(1429) saCmMib(77) dpxCmMibObjects(1) saPUF(10) saPUFTable(1) saPUFEntry(1) saPUFScanOnNextBoot(6)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) ciscoSPVTG(1429) saCmMib(77) dpxCmMibObjects(1) saPUF(10) saPUFTable(1) saPUFEntry(1) saPUFScanOnNextBoot(6)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) sa(1429) saCmMib(77) dpxCmMibObjects(1) saPUF(10) saPUFTable(1) saPUFEntry(1) saPUFScanOnNextBoot(6)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) ciscoSPVTG(1429) saCmMib(77) dpxCmMibObjects(1) saPUF(10) saPUFTable(1) saPUFEntry(1) saPUFScanOnNextBoot(6)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) sa(1429) saCmMib(77) dpxCmMibObjects(1) saPUF(10) saPUFTable(1) saPUFEntry(1) saPUFScanOnNextBoot(6)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) ciscoSPVTG(1429) saCmMib(77) dpxCmMibObjects(1) saPUF(10) saPUFTable(1) saPUFEntry(1) saPUFScanOnNextBoot(6)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) sa(1429) saCmMib(77) dpxCmMibObjects(1) saPUF(10) saPUFTable(1) saPUFEntry(1) saPUFScanOnNextBoot(6)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/1429/77/1/10/1/1/6
  • /ISO/Identified-Organization/6/1/4/1/1429/77/1/10/1/1/6
  • /ISO/3/6/1/4/1/1429/77/1/10/1/1/6
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/1429/saCmMib/dpxCmMibObjects/saPUF/saPUFTable/saPUFEntry/saPUFScanOnNextBoot
  • /iso/identified-organization/dod/internet/private/enterprise/ciscoSPVTG/saCmMib/dpxCmMibObjects/saPUF/saPUFTable/saPUFEntry/saPUFScanOnNextBoot
  • /iso/identified-organization/dod/internet/private/enterprise/sa/saCmMib/dpxCmMibObjects/saPUF/saPUFTable/saPUFEntry/saPUFScanOnNextBoot
  • /iso/identified-organization/dod/internet/private/enterprises/1429/saCmMib/dpxCmMibObjects/saPUF/saPUFTable/saPUFEntry/saPUFScanOnNextBoot
  • /iso/identified-organization/dod/internet/private/enterprises/ciscoSPVTG/saCmMib/dpxCmMibObjects/saPUF/saPUFTable/saPUFEntry/saPUFScanOnNextBoot
  • /iso/identified-organization/dod/internet/private/enterprises/sa/saCmMib/dpxCmMibObjects/saPUF/saPUFTable/saPUFEntry/saPUFScanOnNextBoot
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/1429/saCmMib/dpxCmMibObjects/saPUF/saPUFTable/saPUFEntry/saPUFScanOnNextBoot
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/ciscoSPVTG/saCmMib/dpxCmMibObjects/saPUF/saPUFTable/saPUFEntry/saPUFScanOnNextBoot
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/sa/saCmMib/dpxCmMibObjects/saPUF/saPUFTable/saPUFEntry/saPUFScanOnNextBoot
  • /iso/identified-organization/dod/internet/private/vendor-objects/1429/saCmMib/dpxCmMibObjects/saPUF/saPUFTable/saPUFEntry/saPUFScanOnNextBoot
  • /iso/identified-organization/dod/internet/private/vendor-objects/ciscoSPVTG/saCmMib/dpxCmMibObjects/saPUF/saPUFTable/saPUFEntry/saPUFScanOnNextBoot
  • /iso/identified-organization/dod/internet/private/vendor-objects/sa/saCmMib/dpxCmMibObjects/saPUF/saPUFTable/saPUFEntry/saPUFScanOnNextBoot
  • /iso/org/dod/internet/private/enterprise/1429/saCmMib/dpxCmMibObjects/saPUF/saPUFTable/saPUFEntry/saPUFScanOnNextBoot
  • /iso/org/dod/internet/private/enterprise/ciscoSPVTG/saCmMib/dpxCmMibObjects/saPUF/saPUFTable/saPUFEntry/saPUFScanOnNextBoot
  • /iso/org/dod/internet/private/enterprise/sa/saCmMib/dpxCmMibObjects/saPUF/saPUFTable/saPUFEntry/saPUFScanOnNextBoot
  • /iso/org/dod/internet/private/enterprises/1429/saCmMib/dpxCmMibObjects/saPUF/saPUFTable/saPUFEntry/saPUFScanOnNextBoot
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
current
Default value
0

Enumerated values

ValueName
0unset
1set

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.

In SA-CM-MIB, the row index saPUFIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.1429.77.1.10.1.1.6.<saPUFIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.1429.77.1.10.1.1.6

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

saPUFScanOnNextBoot OBJECT-TYPE
	SYNTAX INTEGER {
		unset(0),
		set(1)
		}
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION
		"Setting an index of this object to set(1) causes the modem to scan for
		the frequency stored in saPUFFrequency.x on the next reboot and record the 
		results to non-vol.
		After the reboot and data is recorded, the index of this object is reset back 
		to unset(0) . 
		Conditions to run a scan on Next boot:
		- saPUFScanOnNextBoot.x must = set (1).
		- saPUFRowStatus.x must be set to active in non-vol."
	DEFVAL { 0 }
	::= { saPUFEntry 6 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Setting an index of this object to set(1) causes the modem to scan for the frequency stored in saPUFFrequency.x on the next reboot and record the results to non-vol. After the reboot and data is recorded, the index of this object is reset back to unset(0) . Conditions to run a scan on Next boot: - saPUFScanOnNextBoot.x must = set (1). - saPUFRowStatus.x must be set to active in non-vol.

Sources for this description

Cisco MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Cisco MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 1

saPUFScanOnNextBoot · currentCisco MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: saPUFScanOnNextBoot

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "saPUFScanOnNextBoot",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "unset",
    "(",
    "0",
    ")",
    ",",
    "set",
    "(",
    "1",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"Setting an index of this object to set(1) causes the modem to scan for the frequency stored in saPUFFrequency.x on the next reboot and record the results to non-vol. After the reboot and data is recorded, the index of this object is reset back to unset(0) . Conditions to run a scan on Next boot: - saPUFScanOnNextBoot.x must = set (1). - saPUFRowStatus.x must be set to active in non-vol.\"",
    "DEFVAL",
    "{",
    "0",
    "}",
    "::=",
    "{",
    "saPUFEntry",
    "6",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "unset",
            0
          ],
          [
            "set",
            1
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Setting an index of this object to set(1) causes the modem to scan for the frequency stored in saPUFFrequency.x on the next reboot and record the results to non-vol. After the reboot and data is recorded, the index of this object is reset back to unset(0) . Conditions to run a scan on Next boot: - saPUFScanOnNextBoot.x must = set (1). - saPUFRowStatus.x must be set to active in non-vol."
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      0
    ]
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.1429)

Pechman Tamsen

Siblings (8)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.1429.77.1.10.1.1.1 saPUFIndex00
1.3.6.1.4.1.1429.77.1.10.1.1.2 saPUFRowStatus00
1.3.6.1.4.1.1429.77.1.10.1.1.3 saPUFFrequency00
1.3.6.1.4.1.1429.77.1.10.1.1.4 saPUFAnnex00
1.3.6.1.4.1.1429.77.1.10.1.1.5 saPUFScanNow00
1.3.6.1.4.1.1429.77.1.10.1.1.7 saPUFScanResults00
1.3.6.1.4.1.1429.77.1.10.1.1.8 saPUFScanTimestamp00
1.3.6.1.4.1.1429.77.1.10.1.1.9 saPUFScanResultsType00